firewallEnabled

ZHNLANDEVICE · .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Indicates if a stateful firewall is enabled for all traffic from
this IP interface to the modem.  If TRUE, all inbound local
traffic (from LAN to modem) that is not responding to an outbound
packet or listed in the firewall exception table will be blocked.

Context

MIB
ZHNLANDEVICE
OID
.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7
Type
column
Access
readwrite
Status
current
Parent
zhnIpInterfaceEntry
Table
zhnIpInterfaceTable
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipInterfaceIndex
LAN IP Address Index
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1
dhcpcPid
If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid of 0 indicates that…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10
dnsType
This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration…
columnDNSTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11
primaryDnsIPAddress
The DNS server primary IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12
secondaryDnsIPAddress
The DNS server secondary IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13
zhnVlanType
This object specifies the VLAN connection type of the interface.
columnZHNLAYER2BRIDGINGVlanTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14
connectionType
This object specifies the connection type of the interface.
columnIpPppoeConnectionTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15
maxMTUSize
The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU …
columnUnsigned32.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16
alternateWanIfName
Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured.
columnOctetString.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17
naptEnabled
This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18
ipInterfaceEnable
Enables or disables this entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2
ipInterfaceIPAddress
IP address of the LAN-side interface of the CPE.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3
ipInterfaceSubnetMask
Subnet mask of the LAN-side interface of the CPE.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4
ipInterfaceAddressingType
Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP
columnIPInterfaceAddressingTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5
ipInterfaceifName
The interface name for this LAN device.
columnOctetString.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6
defaultGateway
The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8
natEnabled
This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9