xcmPrtOutputStaplePosSupported
XEROX-PRINTER-EXT-MIB ·
.1.3.6.1.4.1.253.8.55.9.1.1.101
Object
This object declares the stapling positions supported.
Context
- MIB
- XEROX-PRINTER-EXT-MIB
- OID
.1.3.6.1.4.1.253.8.55.9.1.1.101- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcmPrtOutputEntry
- Table
- xcmPrtOutputTable
- Siblings
- 13
Syntax
XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition
- Source
- XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmPrtOutputRowStatus Manages the status of this conceptual row in the
xcmPrtOutputTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.253.8.55.9.1.1.1 |
| xcmPrtOutputStaple This object declares whether the printer has the ability to
staple multi-page documents delivered to the specified output
destination, and whether this ability is currently turned… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.100 |
| xcmPrtOutputStapleDefault This object declares for the cases where the job-stream does not
specify whether to staple a particular job, whether the printer
should apply the default staple specified in
xcmPr… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.102 |
| xcmPrtOutputStaplePosDefault This object controls the default staple position to be used
when stapling is enabled, and the job-stream does not specify
whether to staple the particular job or the job-stream
sp… | column | XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition | .1.3.6.1.4.1.253.8.55.9.1.1.103 |
| xcmPrtOutputPunch This object declares whether the printer has the ability to
punch holes in documents delivered to the specified output
destination, and whether this ability is currently turned on… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.104 |
| xcmPrtOutputPunchDefault This object declares whether the printer will punch the job
when the print stream does not specify a punch requirement.
'on' indicates hole punching is supported to… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.105 |
| xcmPrtOutputPunchPosSupported This object declares the punch positions supported. | column | XEROX-PRINTER-EXT-TCXcmPrtOutputPunchPosition | .1.3.6.1.4.1.253.8.55.9.1.1.106 |
| xcmPrtOutputBookletFoldStaple This object declares whether the device has the ability to
fold and or staple booklet documents delivered to the specifie
output destination, and whether this ability is currently… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.107 |
| xcmPrtOutputNextIndex The value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.9.1.1.2 |
| xcmPrtOutputPassword This object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray. | column | OctetString | .1.3.6.1.4.1.253.8.55.9.1.1.3 |
| xcmPrtOutputOffsetStackingType This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB. | column | XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingType | .1.3.6.1.4.1.253.8.55.9.1.1.4 |
| xcmPrtOutputTrayTimeoutSupport Determines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
'On' i… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.5 |
| xcmPrtOutputTrayTimeout Determines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
A val… | column | Seconds XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.9.1.1.6 |