xcmPrtOutputPunchDefault
XEROX-PRINTER-EXT-MIB ·
.1.3.6.1.4.1.253.8.55.9.1.1.105
Object
This object declares whether the printer will punch the job
when the print stream does not specify a punch requirement.
'on' indicates hole punching is supported to this output
destination and that the job will be punched if the data
stream contains no job punch information
'off' indicates this printer supports hole punching to this
output destination, and that the job will not be punched if
the data stream contains no job punch information
'not Present' indicates that this printer does not support
hole punching.
Context
- MIB
- XEROX-PRINTER-EXT-MIB
- OID
.1.3.6.1.4.1.253.8.55.9.1.1.105- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcmPrtOutputEntry
- Table
- xcmPrtOutputTable
- Siblings
- 13
Syntax
Printer-MIBPresentOnOff
- Source
- Printer-MIBPresentOnOff
- Base type
Enumeration
Values & Constraints
Type Values
1 | other |
3 | on |
4 | off |
5 | notPresent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmPrtOutputRowStatus Manages the status of this conceptual row in the
xcmPrtOutputTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.253.8.55.9.1.1.1 |
| xcmPrtOutputStaple This object declares whether the printer has the ability to
staple multi-page documents delivered to the specified output
destination, and whether this ability is currently turned… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.100 |
| xcmPrtOutputStaplePosSupported This object declares the stapling positions supported. | column | XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition | .1.3.6.1.4.1.253.8.55.9.1.1.101 |
| xcmPrtOutputStapleDefault This object declares for the cases where the job-stream does not
specify whether to staple a particular job, whether the printer
should apply the default staple specified in
xcmPr… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.102 |
| xcmPrtOutputStaplePosDefault This object controls the default staple position to be used
when stapling is enabled, and the job-stream does not specify
whether to staple the particular job or the job-stream
sp… | column | XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition | .1.3.6.1.4.1.253.8.55.9.1.1.103 |
| xcmPrtOutputPunch This object declares whether the printer has the ability to
punch holes in documents delivered to the specified output
destination, and whether this ability is currently turned on… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.104 |
| xcmPrtOutputPunchPosSupported This object declares the punch positions supported. | column | XEROX-PRINTER-EXT-TCXcmPrtOutputPunchPosition | .1.3.6.1.4.1.253.8.55.9.1.1.106 |
| xcmPrtOutputBookletFoldStaple This object declares whether the device has the ability to
fold and or staple booklet documents delivered to the specifie
output destination, and whether this ability is currently… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.107 |
| xcmPrtOutputNextIndex The value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.9.1.1.2 |
| xcmPrtOutputPassword This object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray. | column | OctetString | .1.3.6.1.4.1.253.8.55.9.1.1.3 |
| xcmPrtOutputOffsetStackingType This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB. | column | XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingType | .1.3.6.1.4.1.253.8.55.9.1.1.4 |
| xcmPrtOutputTrayTimeoutSupport Determines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
'On' i… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.9.1.1.5 |
| xcmPrtOutputTrayTimeout Determines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
A val… | column | Seconds XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.9.1.1.6 |