xcmPrtOutputPunch

Object

column r/w Printer-MIBPresentOnOff

This object declares whether the printer has the ability to
punch holes in documents delivered to the specified output
destination, and whether this ability is currently turned on.
              
'on' indicates hole punching is supported to this output
destination and that it is turned on
              
'off'  indicates this printer supports hole punching to this
output destination, but that it is turned off.  If a job calls
for punched output, no punching will occur.
              
'not Present'  indicates that this printer does not support
hole punching.

Context

MIB: XEROX-PRINTER-EXT-MIB
OID: .1.3.6.1.4.1.253.8.55.9.1.1.104
Type: column
Access: readwrite
Status: current
Parent: xcmPrtOutputEntry
Table: xcmPrtOutputTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
xcmPrtOutputRowStatus Manages the status of this conceptual row in the xcmPrtOutputTable.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.253.8.55.9.1.1.1`
xcmPrtOutputStaple This object declares whether the printer has the ability to staple multi-page documents delivered to the specified output destination, and whether this ability is currently turned…	column	Printer-MIBPresentOnOff	`.1.3.6.1.4.1.253.8.55.9.1.1.100`
xcmPrtOutputStaplePosSupported This object declares the stapling positions supported.	column	XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition	`.1.3.6.1.4.1.253.8.55.9.1.1.101`
xcmPrtOutputStapleDefault This object declares for the cases where the job-stream does not specify whether to staple a particular job, whether the printer should apply the default staple specified in xcmPr…	column	Printer-MIBPresentOnOff	`.1.3.6.1.4.1.253.8.55.9.1.1.102`
xcmPrtOutputStaplePosDefault This object controls the default staple position to be used when stapling is enabled, and the job-stream does not specify whether to staple the particular job or the job-stream sp…	column	XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePosition	`.1.3.6.1.4.1.253.8.55.9.1.1.103`
xcmPrtOutputPunchDefault This object declares whether the printer will punch the job when the print stream does not specify a punch requirement. 'on' indicates hole punching is supported to…	column	Printer-MIBPresentOnOff	`.1.3.6.1.4.1.253.8.55.9.1.1.105`
xcmPrtOutputPunchPosSupported This object declares the punch positions supported.	column	XEROX-PRINTER-EXT-TCXcmPrtOutputPunchPosition	`.1.3.6.1.4.1.253.8.55.9.1.1.106`
xcmPrtOutputBookletFoldStaple This object declares whether the device has the ability to fold and or staple booklet documents delivered to the specifie output destination, and whether this ability is currently…	column	Printer-MIBPresentOnOff	`.1.3.6.1.4.1.253.8.55.9.1.1.107`
xcmPrtOutputNextIndex The value of prtOutputIndex corresponding to the output subunit which will be used when this output subunit is filled. A value of zero(0) indicates that auto output switching will…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.253.8.55.9.1.1.2`
xcmPrtOutputPassword This object is used as the password for an Output Tray, e.g. an output mailbox. It is the value that must be entered to open the output tray.	column	OctetString	`.1.3.6.1.4.1.253.8.55.9.1.1.3`
xcmPrtOutputOffsetStackingType This object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB.	column	XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingType	`.1.3.6.1.4.1.253.8.55.9.1.1.4`
xcmPrtOutputTrayTimeoutSupport Determines whether the printer should wait before sending the printed output to another output destination when the selected or default destination is full. 'On' i…	column	Printer-MIBPresentOnOff	`.1.3.6.1.4.1.253.8.55.9.1.1.5`
xcmPrtOutputTrayTimeout Determines how long the printer should wait before sending the printed output to another output destination when the selected or default destination is full. A val…	column	Seconds XEROX-GENERAL-TCCardinal32	`.1.3.6.1.4.1.253.8.55.9.1.1.6`

`1`	other
`3`	on
`4`	off
`5`	notPresent

Object

Context

Syntax

Values & Constraints

Related Objects