wfOspfTOSSupport

Wellfleet-OSPF-MIB · .1.3.6.1.4.1.18.3.5.3.2.3.1.8

Object

scalar mandatory Enumeration

'The router's support for type-of-service routing.'
REFERENCE
'OSPF Version 2, Appendix F.1.2 Optional TOS support'

Context

MIB: Wellfleet-OSPF-MIB
OID: .1.3.6.1.4.1.18.3.5.3.2.3.1.8
Type: scalar
Access: readonly
Status: mandatory
Parent: wfOspfGeneralGroup
Siblings: 35

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wfOspfGeneralDelete mandatory 'This value determines whether OSPF is configured'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.1`
wfOspfSlotMask mandatory Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is al…	scalar	RFC1155-SMIGauge	`.1.3.6.1.4.1.18.3.5.3.2.3.1.10`
wfOspfNewAseMetricSupport mandatory A parameter to specify if the new style ASE metric support is enabled. The new metric is not compatible with the pre-8.0 ASE metrics. The new metric support should be disabled i…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.11`
wfOspfBackupDisable mandatory This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled the OSPF backup soloist will not maintain a copy of…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.12`
wfOspfPrimaryLogMask mandatory A parameter to specify which OSPF log messages should be logged. This will only effect the Primary OSPF gate. Each bit represents a message as defined below. A 1 in that bit loca…	scalar	RFC1155-SMIGauge	`.1.3.6.1.4.1.18.3.5.3.2.3.1.13`
wfOspfBackupLogMask mandatory A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents a message as defined below. A 1 in that bit locat…	scalar	RFC1155-SMIGauge	`.1.3.6.1.4.1.18.3.5.3.2.3.1.14`
wfOspfAseTagDefault mandatory This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or announce route policy. default(1) indicates that a …	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.15`
wfOspfPrimarySlot mandatory Slot on which OSPF Primary is running. Slots can be 1-14. Default is zero.	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.16`
wfOspfBackupSlot mandatory Slot on which OSPF Backup is running. Slots can be 1-14. Default is zero.	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.17`
wfOspfMaximumPath obsolete Maximum number of equal cost paths allowed for a network installed by OSPF.	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.18`
wfOspfSlotPriority mandatory Comma-separated list of slots specifying the order in which slots should attempt to bring up OSPF soloist. They are listed in the decreasing order of priority. Slot with priority …	scalar	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.18.3.5.3.2.3.1.19`
wfOspfGeneralDisable mandatory 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.2`
wfOspfLsdbCount mandatory Running count of LSDB entries	scalar	RFC1155-SMICounter	`.1.3.6.1.4.1.18.3.5.3.2.3.1.20`
wfOspfMulticastExtensions mandatory A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. …	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.21`
wfOspfMulticastDeterministic mandatory This controls whether or not the deterministic variation of the MOSPF Dijkstra is run or not	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.22`
wfOspfMulticastRoutePinning mandatory This controls whether or not the route pinning variation of the MOSPF Dijkstra is run or not	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.23`
wfOspfOpaqueCapability mandatory This controls whether or not the router will accept and process OPAQUE LSAs	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.24`
wfOspfDeterministicMcastHoldDown mandatory This controls whether or not the Hold Down feature for the Deterministic MOSPF is enabled. If it is enabled, a data flow does not go out of an interface even if it would when the …	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.25`
wfMospfEntryTimeoutValue mandatory The timer value for timing out MOSPF forward entries.	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.26`
wfOspfMaxQueuedMcastPkts mandatory This controls how many mcast packets can be queued on each slot for all flows before the building of mcast trees finishes. If it is not 0, the first a few data packets …	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.27`
wfOspfMcastUseDynTTL mandatory This controls whether dynamic TTL threshold is used. Data forwarding is a little bit faster when it is NOT used. Dynamic TTL means the TTL threshold may be different pe…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.28`
wfOspfRfc1583Compatibility mandatory Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specifi…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.29`
wfOspfGeneralState mandatory 'The state of OSPF'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.3`
wfOspfASEMcastEnable mandatory This attribute indicates whether AS External routes are multicast capable. If enabled, the advertising ASBR sets the MC-bit in the ASE-LSAs for those routes, so that they can be u…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.30`
wfOspfNssaBorderRouter mandatory `A flag to note whether this router NSSA border router'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.31`
wfOspfLsaRefreshMax mandatory `Maximum number of consecutive refreshes of self-originated Summary and External LSAs before applying a configured delay. A value of zero implies that there is no maximum.'	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.32`
wfOspfLsaRefreshDelay mandatory `Delay to apply between the maximum number of consecutive refreshes of self-originated Summary and External LSAs if a non-zero maximum is configured. The unit of delay is in secon…	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.33`
wfOspfAggrUseMaxCost mandatory When area range is configured, sum net lsa is generated depends on this mib attribute: enabled: Use Max Metric to aggregate networks. See RFC2328 3.5 IP subnetting supp…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.34`
wfOspfFwdAddrComp mandatory When enabled allows OSPF to comply with RFC1583 with respect to forwarding address changes. When disabled OSPF remains compatiable with pre-14.00rev1D code.	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.35`
wfOspfMtuUseCommonDefault mandatory when this parameter is enabled, OSPF will use the MTU size of ethernet, that is, 1500 in all the interfaces regardless of what IP passes onto OSPF if the wfOspfMtuSize at the inte…	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.36`
wfOspfRouterId mandatory 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's…	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.18.3.5.3.2.3.1.4`
wfOspfVersionNumber mandatory 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title'	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.5`
wfOspfAreaBdrRtrStatus mandatory 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.6`
wfOspfASBdrRtrStatus mandatory 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers'	scalar	Enumeration	`.1.3.6.1.4.1.18.3.5.3.2.3.1.7`
wfOspfSpfHoldDown mandatory Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down.	scalar	Integer32	`.1.3.6.1.4.1.18.3.5.3.2.3.1.9`