wfOspfMtuUseCommonDefault

Wellfleet-OSPF-MIB · .1.3.6.1.4.1.18.3.5.3.2.3.1.36
MIB view Table view

Object

scalar mandatory r/w Enumeration 
when this parameter is enabled, OSPF will use the MTU size of
ethernet, that is, 1500 in all the interfaces regardless of
what IP passes onto OSPF if the wfOspfMtuSize at the interface
is set to 1(= Default) or 2. If wfOspfMtuSize is greater than 
2 then OSPF will use wfOspfMtuSize as the MTU size at the
interface.

Context

MIB
Wellfleet-OSPF-MIB
OID
.1.3.6.1.4.1.18.3.5.3.2.3.1.36
Type
scalar
Access
readwrite
Status
mandatory
Parent
wfOspfGeneralGroup
Siblings
35

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wfOspfGeneralDelete mandatory
'This value determines whether OSPF is configured'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.1
wfOspfSlotMask mandatory
Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is al…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.18.3.5.3.2.3.1.10
wfOspfNewAseMetricSupport mandatory
A parameter to specify if the new style ASE metric support is enabled. The new metric is not compatible with the pre-8.0 ASE metrics. The new metric support should be disabled i…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.11
wfOspfBackupDisable mandatory
This parameter enables or disables the backup OSPF soloist's backup link state database. When the parameter is set to disabled the OSPF backup soloist will not maintain a copy of…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.12
wfOspfPrimaryLogMask mandatory
A parameter to specify which OSPF log messages should be logged. This will only effect the Primary OSPF gate. Each bit represents a message as defined below. A 1 in that bit loca…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.18.3.5.3.2.3.1.13
wfOspfBackupLogMask mandatory
A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents a message as defined below. A 1 in that bit locat…
scalarRFC1155-SMIGauge.1.3.6.1.4.1.18.3.5.3.2.3.1.14
wfOspfAseTagDefault mandatory
This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or announce route policy. default(1) indicates that a …
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.15
wfOspfPrimarySlot mandatory
Slot on which OSPF Primary is running. Slots can be 1-14. Default is zero.
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.16
wfOspfBackupSlot mandatory
Slot on which OSPF Backup is running. Slots can be 1-14. Default is zero.
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.17
wfOspfMaximumPath obsolete
Maximum number of equal cost paths allowed for a network installed by OSPF.
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.18
wfOspfSlotPriority mandatory
Comma-separated list of slots specifying the order in which slots should attempt to bring up OSPF soloist. They are listed in the decreasing order of priority. Slot with priority …
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.18.3.5.3.2.3.1.19
wfOspfGeneralDisable mandatory
'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.2
wfOspfLsdbCount mandatory
Running count of LSDB entries
scalarRFC1155-SMICounter.1.3.6.1.4.1.18.3.5.3.2.3.1.20
wfOspfMulticastExtensions mandatory
A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. …
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.21
wfOspfMulticastDeterministic mandatory
This controls whether or not the deterministic variation of the MOSPF Dijkstra is run or not
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.22
wfOspfMulticastRoutePinning mandatory
This controls whether or not the route pinning variation of the MOSPF Dijkstra is run or not
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.23
wfOspfOpaqueCapability mandatory
This controls whether or not the router will accept and process OPAQUE LSAs
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.24
wfOspfDeterministicMcastHoldDown mandatory
This controls whether or not the Hold Down feature for the Deterministic MOSPF is enabled. If it is enabled, a data flow does not go out of an interface even if it would when the …
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.25
wfMospfEntryTimeoutValue mandatory
The timer value for timing out MOSPF forward entries.
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.26
wfOspfMaxQueuedMcastPkts mandatory
This controls how many mcast packets can be queued on each slot for all flows before the building of mcast trees finishes. If it is not 0, the first a few data packets …
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.27
wfOspfMcastUseDynTTL mandatory
This controls whether dynamic TTL threshold is used. Data forwarding is a little bit faster when it is NOT used. Dynamic TTL means the TTL threshold may be different pe…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.28
wfOspfRfc1583Compatibility mandatory
Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specifi…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.29
wfOspfGeneralState mandatory
'The state of OSPF'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.3
wfOspfASEMcastEnable mandatory
This attribute indicates whether AS External routes are multicast capable. If enabled, the advertising ASBR sets the MC-bit in the ASE-LSAs for those routes, so that they can be u…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.30
wfOspfNssaBorderRouter mandatory
`A flag to note whether this router NSSA border router'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.31
wfOspfLsaRefreshMax mandatory
`Maximum number of consecutive refreshes of self-originated Summary and External LSAs before applying a configured delay. A value of zero implies that there is no maximum.'
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.32
wfOspfLsaRefreshDelay mandatory
`Delay to apply between the maximum number of consecutive refreshes of self-originated Summary and External LSAs if a non-zero maximum is configured. The unit of delay is in secon…
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.33
wfOspfAggrUseMaxCost mandatory
When area range is configured, sum net lsa is generated depends on this mib attribute: enabled: Use Max Metric to aggregate networks. See RFC2328 3.5 IP subnetting supp…
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.34
wfOspfFwdAddrComp mandatory
When enabled allows OSPF to comply with RFC1583 with respect to forwarding address changes. When disabled OSPF remains compatiable with pre-14.00rev1D code.
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.35
wfOspfRouterId mandatory
'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's…
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.18.3.5.3.2.3.1.4
wfOspfVersionNumber mandatory
'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title'
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.5
wfOspfAreaBdrRtrStatus mandatory
'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.6
wfOspfASBdrRtrStatus mandatory
'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.7
wfOspfTOSSupport mandatory
'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support'
scalarEnumeration.1.3.6.1.4.1.18.3.5.3.2.3.1.8
wfOspfSpfHoldDown mandatory
Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down.
scalarInteger32.1.3.6.1.4.1.18.3.5.3.2.3.1.9