wfOspfAseTagDefault
Wellfleet-OSPF-MIB ·
.1.3.6.1.4.1.18.3.5.3.2.3.1.15
Object
scalar
mandatory
r/w
Enumeration
This parameter indicates how ASE tags will be generated for those ASEs whose tags are not altered by an export route filter or announce route policy. default(1) indicates that a zero value is used. automatic(2) indicates that an automatic tag will be generated as specified in RFC 1403. proprietary(3) indicates that the wellfleet proprietary scheme will be used. In this case, the next hop is used for IGP routes and the neighbor AS is used for EGP routes.
Context
- MIB
- Wellfleet-OSPF-MIB
- OID
.1.3.6.1.4.1.18.3.5.3.2.3.1.15- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- wfOspfGeneralGroup
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | default |
2 | automatic |
3 | proprietary |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wfOspfGeneralDelete mandatory 'This value determines whether OSPF is configured' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.1 |
| wfOspfSlotMask mandatory Slot mask for which slots OSPF is eligible
to run on. The MSBit represents slot 1, the
next most significant bit represents slot 2,
and so on... Slots can be 1-14.
Default is al… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.18.3.5.3.2.3.1.10 |
| wfOspfNewAseMetricSupport mandatory A parameter to specify if the new style ASE metric support
is enabled. The new metric is not compatible with the
pre-8.0 ASE metrics. The new metric support should be
disabled i… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.11 |
| wfOspfBackupDisable mandatory This parameter enables or disables the backup OSPF soloist's
backup link state database. When the parameter is set to disabled
the OSPF backup soloist will not maintain a copy of… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.12 |
| wfOspfPrimaryLogMask mandatory A parameter to specify which OSPF log messages should be logged.
This will only effect the Primary OSPF gate.
Each bit represents a message as defined below. A 1 in that
bit loca… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.18.3.5.3.2.3.1.13 |
| wfOspfBackupLogMask mandatory A parameter to specify which OSPF log messages should be logged.
This will only effect the Backup OSPF gate.
Each bit represents a message as defined below. A 1 in that
bit locat… | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.18.3.5.3.2.3.1.14 |
| wfOspfPrimarySlot mandatory Slot on which OSPF Primary is running. Slots
can be 1-14. Default is zero. | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.16 |
| wfOspfBackupSlot mandatory Slot on which OSPF Backup is running. Slots
can be 1-14. Default is zero. | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.17 |
| wfOspfMaximumPath obsolete Maximum number of equal cost paths allowed for a
network installed by OSPF. | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.18 |
| wfOspfSlotPriority mandatory Comma-separated list of slots specifying the order in which
slots should attempt to bring up OSPF soloist.
They are listed in the decreasing order of priority.
Slot with priority … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.18.3.5.3.2.3.1.19 |
| wfOspfGeneralDisable mandatory 'The administrative status of OSPF in the router. The
value 'enabled' denotes that the OSPF Process is active
on at least one interface; 'disabled' disables it on
all interfaces.' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.2 |
| wfOspfLsdbCount mandatory Running count of LSDB entries | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.18.3.5.3.2.3.1.20 |
| wfOspfMulticastExtensions mandatory A Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
… | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.21 |
| wfOspfMulticastDeterministic mandatory This controls whether or not the deterministic
variation of the MOSPF Dijkstra is run or not | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.22 |
| wfOspfMulticastRoutePinning mandatory This controls whether or not the route pinning
variation of the MOSPF Dijkstra is run or not | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.23 |
| wfOspfOpaqueCapability mandatory This controls whether or not the router will
accept and process OPAQUE LSAs | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.24 |
| wfOspfDeterministicMcastHoldDown mandatory This controls whether or not the Hold Down feature for
the Deterministic MOSPF is enabled. If it is enabled,
a data flow does not go out of an interface even if it
would when the … | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.25 |
| wfMospfEntryTimeoutValue mandatory The timer value for timing out MOSPF forward entries. | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.26 |
| wfOspfMaxQueuedMcastPkts mandatory This controls how many mcast packets can be queued
on each slot for all flows before the building of
mcast trees finishes.
If it is not 0, the first a few data packets … | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.27 |
| wfOspfMcastUseDynTTL mandatory This controls whether dynamic TTL threshold is used.
Data forwarding is a little bit faster when it is NOT used.
Dynamic TTL means the TTL threshold may be different
pe… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.28 |
| wfOspfRfc1583Compatibility mandatory Controls the preference rules used when choosing among
multiple AS-external-LSAs advertising the same destination.
When set to 'enabled', the preference rules remain those
specifi… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.29 |
| wfOspfGeneralState mandatory 'The state of OSPF' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.3 |
| wfOspfASEMcastEnable mandatory This attribute indicates whether AS External routes
are multicast capable. If enabled, the advertising
ASBR sets the MC-bit in the ASE-LSAs for those routes,
so that they can be u… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.30 |
| wfOspfNssaBorderRouter mandatory `A flag to note whether this router NSSA border router' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.31 |
| wfOspfLsaRefreshMax mandatory `Maximum number of consecutive refreshes of self-originated
Summary and External LSAs before applying a configured
delay. A value of zero implies that there is no maximum.' | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.32 |
| wfOspfLsaRefreshDelay mandatory `Delay to apply between the maximum number of consecutive
refreshes of self-originated Summary and External LSAs
if a non-zero maximum is configured. The unit of delay is
in secon… | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.33 |
| wfOspfAggrUseMaxCost mandatory When area range is configured, sum net lsa is generated
depends on this mib attribute:
enabled: Use Max Metric to aggregate networks.
See RFC2328 3.5 IP subnetting supp… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.34 |
| wfOspfFwdAddrComp mandatory When enabled allows OSPF to comply with RFC1583 with
respect to forwarding address changes. When disabled
OSPF remains compatiable with pre-14.00rev1D code. | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.35 |
| wfOspfMtuUseCommonDefault mandatory when this parameter is enabled, OSPF will use the MTU size of
ethernet, that is, 1500 in all the interfaces regardless of
what IP passes onto OSPF if the wfOspfMtuSize at the inte… | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.36 |
| wfOspfRouterId mandatory 'A 32-bit integer uniquely identifying the router in
the Autonomous System.
By convention, to ensure uniqueness, this should
default to the value of one of the router's… | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.18.3.5.3.2.3.1.4 |
| wfOspfVersionNumber mandatory 'The current version number of the OSPF protocol is 2.'
REFERENCE
'OSPF Version 2, Title' | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.5 |
| wfOspfAreaBdrRtrStatus mandatory 'A flag to note whether this router is an area border
router.'
REFERENCE
'OSPF Version 2, Section 3 Splitting the AS into Areas' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.6 |
| wfOspfASBdrRtrStatus mandatory 'A flag to note whether this router is an Autonomous
System border router.'
REFERENCE
'OSPF Version 2, Section 3.3 Classification of routers' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.7 |
| wfOspfTOSSupport mandatory 'The router's support for type-of-service routing.'
REFERENCE
'OSPF Version 2, Appendix F.1.2 Optional TOS support' | scalar | Enumeration | .1.3.6.1.4.1.18.3.5.3.2.3.1.8 |
| wfOspfSpfHoldDown mandatory Hold Down Timer for the SPF. The SPF will run at most
once per hold down timer value. A value of 0 means no
hold down. | scalar | Integer32 | .1.3.6.1.4.1.18.3.5.3.2.3.1.9 |