cfgWlanIfaceIeee80211w
WESTERMO-SW6-MIB ·
.1.3.6.1.4.1.16177.1.400.1.1.3.2.1.30
Object
column
r/w
Enumeration
Controls usage of 802.11w Management Frame Protection (MFP)
mechanism. If set to optional on AP, MFP will be enabled only
for clients which have it also enabled. If set to required, only
MFP enabled clients will be able to connect.
Applies to AP and STA.
Context
- MIB
- WESTERMO-SW6-MIB
- OID
.1.3.6.1.4.1.16177.1.400.1.1.3.2.1.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgWlanInterfaceTableEntry
- Table
- cfgWlanInterfaceTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | optional |
2 | required |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgWlanIfaceIndex Entry index of table. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.1 |
| cfgWlanIfaceDtim This attribute shall specify the number of beacon intervals that
shall elapse between transmission of beacons frames containing a
TIM element whose DTIM count field is 0. This val… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.10 |
| cfgWlanIfaceApIsolate Enable AP clients isolation.
If enabled, clients connected to this AP can't communicate
to each other.
Applies to AP. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.100 |
| cfgWlanIfaceBitrates Fixed MCS index for 802.11n rates.
Set to -1 to disable (leave on auto). Allows for entering multiple
indices divided by a space which are then used in auto rate.
T… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.11 |
| cfgWlanIfaceBeaconInterval Time in kus (1.024 ms) between the sending of beacon frames.
Applies to AP. 802.11n products only. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.12 |
| cfgWlanIfaceWmeParameter Reference ID to the WME parameter table.
Uses all parameters in the cfgWlanWmeTable which have as
cfgWlanWmeId the value set here.
Applies to AP and … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.13 |
| cfgWlanIfaceWmeEnabled Enables usage of the WME parameter table.
When using legacy rates (a-rates and g-rates) this is optional.
When using n-rates this has to be enabled at all times.
… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.14 |
| cfgWlanIfaceScanList Index to specify a frequency list with frequencies to be scanned
when in STA mode. To only scan the frequency defined in
cfgWlanDevFrequency set to -1. To scan all frequencies all… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.15 |
| cfgWlanIfaceIgnoreBroadcastSsid Send empty SSID in beacons and ignore probe request frames that
do not specify the full SSID, i.e., require stations to know SSID.
Applies to AP. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.16 |
| cfgWlanIfaceMacaddrAcl Mode of the MAC access control list.
* **acceptunlessdeny(0):** Accept unless deny filter. Accept
every MAC unless it is on the list defined in
`cfgWlanAclBlack… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.17 |
| cfgWlanIfaceMaxNumSta Maximum number of allowed stations which can connect to this AP.
Applies to AP. 802.11n products only. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.18 |
| cfgWlanIfaceBssid BSSID of AP.
Set 00:00:00:00:00:00 to use the MAC address stored in the flash of
the wireless card itself. If this is the second virtual AP on this
card it will aut… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.19 |
| cfgWlanIfaceName Name of the virtual wireless interface.
Applies to AP and STA. | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.2 |
| cfgWlanIfaceLegacyRates Wireless legacy data rates:
* **11b:** 1, 2, 5.5, 11 Mbps
* **11a/g:** 6, 9, 12, 18, 24, 36, 48, 54 Mbps
The values are interpreted as flags:
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.20 |
| cfgWlanIface4addr This option allows to bridge the STA side.
When used on the STA, the corresponding AP has to enable this
feature as well.
Applies to AP and STA. 802.… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.21 |
| cfgWlanIfaceInactivityTimeout If a station does not send anything in ap_max_inactivity seconds,
an empty data frame is sent to it in order to verify whether it is
still in range. If this frame is not ACKed, th… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.23 |
| cfgWlanIfaceUseVendorSsid When cfgWlanIfaceIgnoreBroadcastSsid is enabled, a passively
scanning STA (forced or because of DFS) has no way of detecting
the AP it tries to find. On an AP this options adds th… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.26 |
| cfgWlanIfaceDevice Maps the virtual wireless interface to the radio device.
Applies to AP and STA. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.3 |
| cfgWlanIfaceIeee80211wMaxTimeout 802.11w Management Frame Protection (MFP)
Association SA query maximum timeout (in TU = 1.024 ms; for MFP)
(maximum time to wait for a SA query response)
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.31 |
| cfgWlanIfaceIeee80211wRetryTimeout 802.11w Management Frame Protection (MFP)
Association SA query retry timeout (in TU = 1.024 ms; for MFP)
(time between two subsequent SA query requests)
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.32 |
| cfgWlanIfaceMode Wireless Operation Mode.
Allowed modes are:
* **ap(0):** defines the interface as Access Point (AP)
* **sta(1):** defines the interface as Station (S… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.4 |
| cfgWlanIfaceAcsList Index to specify a frequency list for Automated Channel Selection
(ACS) support when in AP mode. To disable set to -1.
Applies to AP. 802.11n products only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.40 |
| cfgWlanIfaceSsid The Service Set Identifier (SSID) of the wireless interface is the
arbitrary name of the wireless network this interface is part of.
Applies to AP and STA. | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.5 |
| cfgWlanIfaceEncryption Wireless Encryption Mode.
Following encryption modes are supported: **open(0)**, **wpa2(3)**,
**wpa2eap(6)** and **sae(7)**.
**Note:** WPA2 EAP enabl… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.6 |
| cfgWlanIfaceNeighbourReport Enable/disable neighbour reporting.
A STA can request the neighbour table from an AP and use this
information to improve its handoff decision.
Applie… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.60 |
| cfgWlanIfaceNeighbourParameter Reference ID to the neighbour table. Uses all neighbours in the
`cfgWlanNeighbourTable` which have as `cfgWlanNeighbourId` the value set here.
Applies to AP. 802.11… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.61 |
| cfgWlanIfacePassword Wireless password if an encryption is in use.
Each character in the pass-phrase must have an
encoding in the range of 32 to 126 (decimal),
inclusive. (IEEE Std. 802… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.7 |
| cfgWlanIfacePassiveScanning Wireless Scanning Mode.
If the scanning mode is set to active(0) the station will send
a probe request to detect available access points if it's allowed
by the coun… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.8 |
| cfgWlanIfaceL2nat This option allows to bridge the STA side.
It is intended to be used in setups where the STA is doing
handoff between multiple APs. There is no configuration on the… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.80 |
| cfgWlanIfaceL2natLearningMode From which type of frames the IP/MAC table may be learned.
When `cfgWlanIfaceL2nat` is enabled a table of the association
between IP-addresses and MAC-addresses is … | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.81 |
| cfgWlanIfaceL2natDefaultDestination This option defines the default MAC address to send frames to.
Whenever a unicast frame is received for which no learned entry
exists, or which isn't a L3 frame (e.… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.82 |
| cfgWlanIfaceBeaconMiss Number of misses on consecutive beacons before the station will
disconnect from the associated access point.
Applies to STA. 802.11n products only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.9 |
| cfgWlanIfaceTimeAdvertisement Enable AP to include local time in association response frames.
This provides a mean for APs to distribute its local system
time to STAs in setups where devices hav… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.3.2.1.90 |