cfgNlmMonScanLoopInterval
WESTERMO-SW6-MIB ·
.1.3.6.1.4.1.16177.1.400.1.1.40.2.1.12
Object
column
r/w
Integer32
Scan loop debounce interval in milliseconds.
If set to non-zero it will mark interface 'down' after
receiving scan loop trap 415 and mark it 'up' after
scan loop interval if no other 415 events have been
received.
Applies to STA. 802.11n products only.
Context
- MIB
- WESTERMO-SW6-MIB
- OID
.1.3.6.1.4.1.16177.1.400.1.1.40.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgNlmMonitorTableEntry
- Table
- cfgNlmMonitorTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgNlmMonIndex Entry index of Table. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.1 |
| cfgNlmMonUpAction NLM 'up' state monitor action.
The action is executed on a monitor-state transition to 'up'.
Set to 0 to disable (i.e. no action).
Sup… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.10 |
| cfgNlmMonDownAction NLM 'down' state monitor script.
The action is executed on a monitor-state transition to 'down'.
Set to 0 to disable (i.e. no action).
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.11 |
| cfgNlmMonEnabled Enable this entry in the monitor list.
Applies to AP and STA. | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.2 |
| cfgNlmMonInterval Execution interval of this monitor in milliseconds.
In case of an event driven monitor (e.g. `cfgNlmMonType` set to
**wlan(2)**), this defines a timeout.
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.3 |
| cfgNlmMonCount NLM monitor counter.
The number of times the measured criteria has to be down, until
the monitor is reported as down.
Applies to AP and STA. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.4 |
| cfgNlmMonType Objects which can be monitored.
* **phy(0)** monitor checks periodically the link status of the
ethernet interfaces defined by `cfgNlmMonInterfaces`. If at least
… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.5 |
| cfgNlmMonInterfaces NLM monitor interface(s).
This parameter specifies the name of the interface(s)
which is/are to be monitored.
For the type **phy(0)** multiple interf… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.6 |
| cfgNlmMonDestination NLM monitor destination.
This parameter specifies the IPv4 address which is to be monitored.
It will only be used when `cfgNlmMonType` is set to **ic… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.7 |