cfgNlmMonEnabled
WESTERMO-SW6-MIB ·
.1.3.6.1.4.1.16177.1.400.1.1.40.2.1.2
Object
column
r/w
Enumeration
Enable this entry in the monitor list.
Applies to AP and STA.
Context
- MIB
- WESTERMO-SW6-MIB
- OID
.1.3.6.1.4.1.16177.1.400.1.1.40.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfgNlmMonitorTableEntry
- Table
- cfgNlmMonitorTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfgNlmMonIndex Entry index of Table. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.1 |
| cfgNlmMonUpAction NLM 'up' state monitor action.
The action is executed on a monitor-state transition to 'up'.
Set to 0 to disable (i.e. no action).
Sup… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.10 |
| cfgNlmMonDownAction NLM 'down' state monitor script.
The action is executed on a monitor-state transition to 'down'.
Set to 0 to disable (i.e. no action).
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.11 |
| cfgNlmMonScanLoopInterval Scan loop debounce interval in milliseconds.
If set to non-zero it will mark interface 'down' after
receiving scan loop trap 415 and mark it 'up' after
scan loop in… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.12 |
| cfgNlmMonInterval Execution interval of this monitor in milliseconds.
In case of an event driven monitor (e.g. `cfgNlmMonType` set to
**wlan(2)**), this defines a timeout.
… | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.3 |
| cfgNlmMonCount NLM monitor counter.
The number of times the measured criteria has to be down, until
the monitor is reported as down.
Applies to AP and STA. | column | Integer32 | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.4 |
| cfgNlmMonType Objects which can be monitored.
* **phy(0)** monitor checks periodically the link status of the
ethernet interfaces defined by `cfgNlmMonInterfaces`. If at least
… | column | Enumeration | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.5 |
| cfgNlmMonInterfaces NLM monitor interface(s).
This parameter specifies the name of the interface(s)
which is/are to be monitored.
For the type **phy(0)** multiple interf… | column | OctetString | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.6 |
| cfgNlmMonDestination NLM monitor destination.
This parameter specifies the IPv4 address which is to be monitored.
It will only be used when `cfgNlmMonType` is set to **ic… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.16177.1.400.1.1.40.2.1.7 |