tlpUpsDeviceTestResultsStatus
TRIPPLITE-PRODUCTS ·
.1.3.6.1.4.1.850.1.1.3.1.2.1.1.6
Object
column
Enumeration
The result of the last self-test run on the ups.
Context
- MIB
- TRIPPLITE-PRODUCTS
- OID
.1.3.6.1.4.1.850.1.1.3.1.2.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tlpUpsDeviceEntry
- Table
- tlpUpsDeviceTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noTest |
1 | doneAndPassed |
2 | doneAndWarning |
3 | doneAndError |
4 | aborted |
5 | inProgress |
6 | noTestInitiated |
7 | badBattery |
8 | overCurrent |
9 | batteryFailed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tlpUpsDeviceMainLoadState The current state of the main output of the device. | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.1 |
| tlpUpsDeviceLastShutdownReason The last unit shut down reason. | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.10 |
| tlpUpsDeviceOutputCurrentPrecision Output current is reported by tlpUpsOutputLineCurrent, tlpUpsOutputLineCurrentMin and
tlpUpsOutputLineCurrentMax. These values are all reported in hundredths(0.01A),which
accomm… | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.11 |
| tlpUpsDeviceMainLoadControllable Indicates whether or not the main output is controllable, and whether
the ups can be turned off and on. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.2 |
| tlpUpsDeviceMainLoadCommand Reading this value will always return 0. Setting this value to
turnOff(1) will turn off the main output of the ups. Setting this
value to turnOn(2) will turn on the main output of… | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.3 |
| tlpUpsDevicePowerOnDelay The configurable delay value, which sets the amount of additional
time a given device will wait before it connects to a valid AC
source. By default the delay value is set to 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.4 |
| tlpUpsDeviceTestDate The date of the last self-test run on the ups, in the format YYYY-MM-DD. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.5 |
| tlpUpsDeviceTemperatureC The ambient temperature at or near the ups casing. Temperature
measurements are not supported on all models. If not supported,
this value will always return ERROR_NO_SUCH_NAME. | column | 0.1 degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.7 |
| tlpUpsDeviceTemperatureF The ambient temperature at or near the ups casing. Temperature
measurements are not supported on all models. If not supported,
this value will always return ERROR_NO_SUCH_NAME. | column | 0.1 degrees Fahrenheit SNMPv2-SMIInteger32 | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.8 |
| tlpUpsDeviceLastACFailureReason The last AC failure reason. | column | Enumeration | .1.3.6.1.4.1.850.1.1.3.1.2.1.1.9 |