tlpUpsDeviceOutputCurrentPrecision

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.1.2.1.1.11
MIB view Table view

Object

column Enumeration 
Output current is reported by  tlpUpsOutputLineCurrent,  tlpUpsOutputLineCurrentMin and
tlpUpsOutputLineCurrentMax. These values are all reported in hundredths(0.01A),which
accommodates all models;  however, on any given device the actual precision may vary. This
value describes the actual precision, which can be used as a divisor against the output current
values to obtain the true output current measurement. For example, if tlpUpsOutputLineCurrent reports
530 and tlpUpsDeviceOutputCurrentPrecision is tenths(1), then the actual output current is 5.3.

Context

MIB
TRIPPLITE-PRODUCTS
OID
.1.3.6.1.4.1.850.1.1.3.1.2.1.1.11
Type
column
Access
readonly
Status
current
Parent
tlpUpsDeviceEntry
Table
tlpUpsDeviceTable
Siblings
10

Syntax

Enumeration

Values & Constraints

Enumerated Values
0wholeNumber
1tenths
2hundredths

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tlpUpsDeviceMainLoadState
The current state of the main output of the device.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.1.2.1.1.1
tlpUpsDeviceLastShutdownReason
The last unit shut down reason.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.1.2.1.1.10
tlpUpsDeviceMainLoadControllable
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.850.1.1.3.1.2.1.1.2
tlpUpsDeviceMainLoadCommand
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of…
columnEnumeration.1.3.6.1.4.1.850.1.1.3.1.2.1.1.3
tlpUpsDevicePowerOnDelay
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.1.2.1.1.4
tlpUpsDeviceTestDate
The date of the last self-test run on the ups, in the format YYYY-MM-DD.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.850.1.1.3.1.2.1.1.5
tlpUpsDeviceTestResultsStatus
The result of the last self-test run on the ups.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.1.2.1.1.6
tlpUpsDeviceTemperatureC
The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
column0.1 degrees Celsius SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.1.2.1.1.7
tlpUpsDeviceTemperatureF
The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
column0.1 degrees Fahrenheit SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.1.2.1.1.8
tlpUpsDeviceLastACFailureReason
The last AC failure reason.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.1.2.1.1.9