tlpCoolingConfigEntry

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.5.5.1.1

Object

row

An entry configuration details for a particular cooling device.

Context

MIB: TRIPPLITE-PRODUCTS
OID: .1.3.6.1.4.1.850.1.1.3.5.5.1.1
Type: row
Status: current
Parent: tlpCoolingConfigTable
Table: tlpCoolingConfigTable
Children: 25

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
tlpCoolingAutoStart Specifies if the unit should start automatically on power up. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.1`
tlpCoolingOffOnInputContact Indicates if the unit should stop cooling when input contact is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.10`
tlpCoolingOffOnLeak Indicates if the unit should stop cooling when leak input is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.11`
tlpCoolingWaterLeakContactType The water leak contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.12`
tlpCoolingAirFilterInterval The number of weeks before the air filter needs to be changed. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	weeks SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.13`
tlpCoolingAirFilterAlarm When enabled, an alarm should occur when the maximum number of air filter run hours has been exceeded. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	hours Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.14`
tlpCoolingMaxAirFilterRunHours The maximum interval for air filter run hours before warning is annunciated. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	hours SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.15`
tlpCoolingStartTimer The unit will start operate after the specified timer elapsed. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	minutes SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.16`
tlpCoolingStopTimer The unit will switch to standby mode after the specified timer elapsed. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	minutes SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.17`
tlpCoolingEnergyMode This option enables or disables the energy saving mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.18`
tlpCoolingDefrostMode This option enables or disables the defrost mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.19`
tlpCoolingFanSpeed Specifies the actual speed of the evaporator fan. Setting the fan speed to auto(6) will enable tlpCoolingAutoFanSpeed; however, on most units getting the fan speed will return t…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.2`
tlpCoolingRemoteTemperatureSensor This option enables or disables the remote temperature sensor. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.20`
tlpCoolingDehumidifyingMode This option enables or disables the dehumidifying mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.21`
tlpCoolingFanAlwaysOn This option enables or disables the fan always on. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.22`
tlpCoolingQuietMode This option enables or disables the quiet mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.23`
tlpCoolingHotGasBypass This option enables or disables the hot gas bypass. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.24`
tlpCoolingAutoFanSpeed This option enables or disables the auto fan speed. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.25`
tlpCoolingControlType Specifies which temperature is used as a control point. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.3`
tlpCoolingDisplayUnits Specifies whether displays output values in Metric or English formats. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.4`
tlpCoolingBeepOnKey Specifies whether a beep is emitted when a key is pressed on the unit's display panel. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.5`
tlpCoolingInputContactType The input contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.6`
tlpCoolingOutputContactType The output contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.7`
tlpCoolingOutputRelaySource The alarm level that causes the output relay to activate. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.8`
tlpCoolingOutputRelayDefault Type of contact to make when output relay is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.5.5.1.1.9`

Indexes