tlpAtsDeviceOutputCurrentPrecision

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.4.2.1.1.11
MIB view Table view

Object

column Enumeration 
Output current is reported by tlpAtsOutputCurrent, tlpAtsOutputCurrentMin
and tlpAtsOutputCurrentMax. These values are all reported in hundredths
(0.01A), which accommodates all models; however, on any given device the
actual precision may vary. This value describes the actual precision, which
can be used as a divisor against the output current values to obtain the
true output current measurement. For example, if tlpAtsOutputCurrent reports
530 and tlpAtsDeviceOutputCurrentPrecision is tenths(1), then the actual
output current is 5.3.

Context

MIB
TRIPPLITE-PRODUCTS
OID
.1.3.6.1.4.1.850.1.1.3.4.2.1.1.11
Type
column
Access
readonly
Status
current
Parent
tlpAtsDeviceEntry
Table
tlpAtsDeviceTable
Siblings
11

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none
1tenths
2hundredths

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tlpAtsDeviceMainLoadState
The current state of the main output of the device.
columnEnumeration.1.3.6.1.4.1.850.1.1.3.4.2.1.1.1
tlpAtsDeviceAggregatePowerFactor
The aggregate power factor of all phases.
column0.1 Watts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.10
tlpAtsDeviceGeneralFault
Indicates whether or not the ats is in a system fault condition. When the ats is in such a fault condition, the condition can be cleared with tlpAtsControlResetGeneralFault.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.850.1.1.3.4.2.1.1.12
tlpAtsDeviceMainLoadControllable
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.850.1.1.3.4.2.1.1.2
tlpAtsDeviceMainLoadCommand
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of…
columnEnumeration.1.3.6.1.4.1.850.1.1.3.4.2.1.1.3
tlpAtsDevicePowerOnDelay
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. Fo…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.4
tlpAtsDeviceTotalInputPowerRating
The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columnWatts SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.5
tlpAtsDeviceTemperatureC
The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columndegrees Celsius SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.6
tlpAtsDeviceTemperatureF
The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
columndegrees Fahrenheit SNMPv2-SMIInteger32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.7
tlpAtsDevicePhaseImbalance
The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all lo…
columnpercent Integer32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.8
tlpAtsDeviceOutputPowerTotal
The AC output total power for all circuits.
columnWatts SNMPv2-SMIUnsigned32.1.3.6.1.4.1.850.1.1.3.4.2.1.1.9