tlpAtsDeviceGeneralFault

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.4.2.1.1.12

MIB view Table view

Object

column SNMPv2-TCTruthValue

Indicates whether or not the ats is in a system fault condition. When the
ats is in such a fault condition, the condition can be cleared with
tlpAtsControlResetGeneralFault.

Context

MIB: TRIPPLITE-PRODUCTS
OID: .1.3.6.1.4.1.850.1.1.3.4.2.1.1.12
Type: column
Access: readonly
Status: current
Parent: tlpAtsDeviceEntry
Table: tlpAtsDeviceTable
Siblings: 11

Syntax

SNMPv2-TCTruthValue

Source: SNMPv2-TCTruthValue
Base type: Enumeration

Values & Constraints

Type Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tlpAtsDeviceMainLoadState The current state of the main output of the device.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.1`
tlpAtsDeviceAggregatePowerFactor The aggregate power factor of all phases.	column	0.1 Watts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.10`
tlpAtsDeviceOutputCurrentPrecision Output current is reported by tlpAtsOutputCurrent, tlpAtsOutputCurrentMin and tlpAtsOutputCurrentMax. These values are all reported in hundredths (0.01A), which accommodates all m…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.11`
tlpAtsDeviceMainLoadControllable Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.2`
tlpAtsDeviceMainLoadCommand Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.3`
tlpAtsDevicePowerOnDelay The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. Fo…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.4`
tlpAtsDeviceTotalInputPowerRating The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	Watts SNMPv2-SMIInteger32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.5`
tlpAtsDeviceTemperatureC The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	degrees Celsius SNMPv2-SMIInteger32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.6`
tlpAtsDeviceTemperatureF The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.	column	degrees Fahrenheit SNMPv2-SMIInteger32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.7`
tlpAtsDevicePhaseImbalance The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all lo…	column	percent Integer32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.8`
tlpAtsDeviceOutputPowerTotal The AC output total power for all circuits.	column	Watts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.4.2.1.1.9`