tnLldpTxDelay
TN-LLDP-MIB ·
.1.3.6.1.4.1.7483.6.1.2.59.1.1.1.4
Object
column
r/w
seconds Integer32
The tnLldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the tnLldpTxDelay is set by the
following formula:
1 <= tnLldpTxDelay <= (0.25 * tnLldpMessageTxInterval)
The default value for tnLldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.
Context
- MIB
- TN-LLDP-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.59.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tnLldpConfigEntry
- Table
- tnLldpConfigTable
- Siblings
- 8
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-8192
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnLldpMessageTxInterval The interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for tnLldpMessageTxInterval object is
30 seconds.
T… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.1 |
| tnLldpMessageTxHoldMultiplier The time-to-live value expressed as a multiple of the
tnLldpMessageTxInterval object. The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.2 |
| tnLldpReinitDelay The tnLldpReinitDelay indicates the delay (in units of
seconds) from when tnLldpPortConfigAdminStatus object of a
particular port becomes 'disabled' until re-initialization
will b… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.3 |
| tnLldpNotificationInterval This object controls the transmission of LLDP notifications.
the agent must not generate more than one lldpRemTablesChange
notification-event in the indicated perio… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.5 |
| tnLldpTxCreditMax The maximum number of consecutive LLDPDUs that can be
transmitted at any time.
The default value for tnLldpTxCreditMax object is 5.
The value of this object must be restored from … | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.6 |
| tnLldpMessageFastTx The interval at which LLDP frames are transmitted on
behalf of this LLDP agent during fast transmission period
(e.g. when a new neighbor is detected).
The default value for tnLldp… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.7 |
| tnLldpMessageFastTxInit The tnLldpMessageFastTxInit specifies the number of PDUs
to transmit during a fast transmission period. | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.8 |
| tnLldpAdminStatus The tnLldpAdminStatus specifies whether or not LLDP
is operationally 'enabled(1)' on the system, or
'disabled(2).' This is a system-wide configuration and
overrides the individual… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.9 |