tnLldpNotificationInterval
TN-LLDP-MIB ·
.1.3.6.1.4.1.7483.6.1.2.59.1.1.1.5
Object
column
r/w
seconds Integer32
This object controls the transmission of LLDP notifications.
the agent must not generate more than one lldpRemTablesChange
notification-event in the indicated period, where a
'notification-event' is the transmission of a single
notification PDU type to a list of notification destinations.
If additional changes in tnLldpRemoteSystemsData object
groups occur within the indicated throttling period,
then these trap- events must be suppressed by the
agent. An NMS should periodically check the value of
tnLldpStatsRemTableLastChangeTime to detect any missed
lldpRemTablesChange notification-events, e.g. due to
throttling or transmission loss.
If notification transmission is enabled for particular ports,
the suggested default throttling period is 5 seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.
Context
- MIB
- TN-LLDP-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.59.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tnLldpConfigEntry
- Table
- tnLldpConfigTable
- Siblings
- 8
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 5-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnLldpMessageTxInterval The interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for tnLldpMessageTxInterval object is
30 seconds.
T… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.1 |
| tnLldpMessageTxHoldMultiplier The time-to-live value expressed as a multiple of the
tnLldpMessageTxInterval object. The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.2 |
| tnLldpReinitDelay The tnLldpReinitDelay indicates the delay (in units of
seconds) from when tnLldpPortConfigAdminStatus object of a
particular port becomes 'disabled' until re-initialization
will b… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.3 |
| tnLldpTxDelay The tnLldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recom… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.4 |
| tnLldpTxCreditMax The maximum number of consecutive LLDPDUs that can be
transmitted at any time.
The default value for tnLldpTxCreditMax object is 5.
The value of this object must be restored from … | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.6 |
| tnLldpMessageFastTx The interval at which LLDP frames are transmitted on
behalf of this LLDP agent during fast transmission period
(e.g. when a new neighbor is detected).
The default value for tnLldp… | column | seconds Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.7 |
| tnLldpMessageFastTxInit The tnLldpMessageFastTxInit specifies the number of PDUs
to transmit during a fast transmission period. | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.8 |
| tnLldpAdminStatus The tnLldpAdminStatus specifies whether or not LLDP
is operationally 'enabled(1)' on the system, or
'disabled(2).' This is a system-wide configuration and
overrides the individual… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.59.1.1.1.9 |