tnLagLACPSelCritSlaveToPartner

TN-LAG-MIB · .1.3.6.1.4.1.7483.6.1.2.15.2.1.15

Object

column r/w SNMPv2-TCTruthValue

The value of tnLagLACPSelCritSlaveToPartner specifies together with
tnLagLACPSelCrit  selection criteria  should be used to select the
active sub-group.
The term 'eligible member' refers to a lag-member link which can
potentially become active. This means it is oper up, and not disabled
for use by the remote side. The object tnLagLACPSelCritSlaveToPartner
can be used to control whether ornot this latter condition is taken
into account.

Context

MIB: TN-LAG-MIB
OID: .1.3.6.1.4.1.7483.6.1.2.15.2.1.15
Type: column
Access: readwrite
Status: current
Parent: tnLagConfigEntry
Table: tnLagConfigTable
Siblings: 19

Syntax

SNMPv2-TCTruthValue

Source: SNMPv2-TCTruthValue
Base type: Enumeration

Values & Constraints

Type Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnLagIndex the number of the Link Aggregation Group.	column	LAGInterfaceNumber	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.1`
tnLagLACPAdminKeyAutogen tnLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key in the dot3adAggActorAdminKey object was auto generated. tnLagLACPAdminKeyAutogen is set to 'false', if the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.10`
tnLagLACPTransmitInterval tnLagLACPTransmitInterval configures the timer interval for periodic transmission of LACP packets. If set to 'slow', LACP packets are transmitted every 30 seconds. If set to 'fast…	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.11`
tnLagAccessAdaptQos The value of tnLagAccessAdaptQos specifies how the LAG SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - Th…	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.12`
tnLagLACPXmitStdby The value of tnLagLACPXmitStdby specifies whether or not LACP messages are transmitted on standby-links.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.13`
tnLagLACPSelCrit The value of tnLagLACPSelCrit specifies which selection criteria should be used to select the active sub-group.	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.14`
tnLagLACPNbrOfSubGroups The value of tnLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.16`
tnLagholdTimeDown The value of tnLagholdTimeDown specifies the timer in 0.1 second units which controls the delay between detecting that a LAG is down (all active ports are down) and reporting it …	column	100s of milliseconds Unsigned32	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.17`
tnLagPortType The value of tnLagPortType specifies the type of ports allowed in this LAG. A value of 'standard (1)' allows all non-HSMDA type ports to be added to this LAG. A va…	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.18`
tnLagPerFpIngQueuing The value of tnLagPerFpIngQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is ret…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.19`
tnLagRowStatus RowStatus for this entry.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.2`
tnLagAlmProfName .	column	OctetString	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.20`
tnLagPortThreshold tnLagPortThreshold is a threshold for tnLagPortThresholdAction. When a physical port link state changes and the number of operational physical ports is less than or…	column	Integer32	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.3`
tnLagPortThresholdAction Port Threshold Action is action to take when the number of operational (link up) physical ports is less than tnLagPortThreshold. When a physical port ifOperStatus c…	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.4`
tnLagEnableMarkerGenerator enables (true(1)) or disables (false(2)) the Marker Generator protocol.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.5`
tnLagEnableLACP enables (true(1)) or disables (false(2)) the Link Aggregation Control Protocol (LACP).	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.6`
tnLagDescription discription text for the Link Aggregation Group port.	column	TN-TC-MIBTItemLongDescription	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.7`
tnLagDynamicCosting When dynamic cost and OSPF autocost are both configured then costing is applied based on the total number of links configured and the cost is advertised inversely proportional to …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.8`
tnLagLACPMode tnLagLACPMode represents the mode in which LACP will operate. If the value is set to 'passive', LACP places all member ports of a lag into a passive negotiating state. When this i…	column	Enumeration	`.1.3.6.1.4.1.7483.6.1.2.15.2.1.9`