tnLagLACPNbrOfSubGroups
TN-LAG-MIB ·
.1.3.6.1.4.1.7483.6.1.2.15.2.1.16
Object
column
SNMPv2-SMIUnsigned32
The value of tnLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG.
Context
- MIB
- TN-LAG-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.15.2.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tnLagConfigEntry
- Table
- tnLagConfigTable
- Siblings
- 19
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnLagIndex the number of the Link Aggregation Group. | column | LAGInterfaceNumber | .1.3.6.1.4.1.7483.6.1.2.15.2.1.1 |
| tnLagLACPAdminKeyAutogen tnLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key
in the dot3adAggActorAdminKey object was auto generated.
tnLagLACPAdminKeyAutogen is set to 'false', if the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.10 |
| tnLagLACPTransmitInterval tnLagLACPTransmitInterval configures the timer interval for
periodic transmission of LACP packets. If set to 'slow', LACP packets
are transmitted every 30 seconds. If set to 'fast… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.11 |
| tnLagAccessAdaptQos The value of tnLagAccessAdaptQos specifies how the LAG SAP queue and
virtual scheduler buffering and rate parameters are adapted over
multiple active MDAs.
link (1) - Th… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.12 |
| tnLagLACPXmitStdby The value of tnLagLACPXmitStdby specifies whether or not LACP messages
are transmitted on standby-links. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.13 |
| tnLagLACPSelCrit The value of tnLagLACPSelCrit specifies which selection criteria
should be used to select the active sub-group. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.14 |
| tnLagLACPSelCritSlaveToPartner The value of tnLagLACPSelCritSlaveToPartner specifies together with
tnLagLACPSelCrit selection criteria should be used to select the
active sub-group.
The term 'eligible member'… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.15 |
| tnLagholdTimeDown The value of tnLagholdTimeDown specifies the timer in 0.1 second
units which controls the delay between detecting that a LAG is down
(all active ports are down) and reporting it … | column | 100s of milliseconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.15.2.1.17 |
| tnLagPortType The value of tnLagPortType specifies the type of ports allowed in
this LAG.
A value of 'standard (1)' allows all non-HSMDA type ports to be added
to this LAG. A va… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.18 |
| tnLagPerFpIngQueuing The value of tnLagPerFpIngQueuing specifies whether a more efficient
method of queue allocation for LAG SAPs should be utilized.
An 'inconsistentValue' error is ret… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.19 |
| tnLagRowStatus RowStatus for this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.6.1.2.15.2.1.2 |
| tnLagAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.6.1.2.15.2.1.20 |
| tnLagPortThreshold tnLagPortThreshold is a threshold for tnLagPortThresholdAction.
When a physical port link state changes and the number of
operational physical ports is less than or… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.15.2.1.3 |
| tnLagPortThresholdAction Port Threshold Action is action to take when the number of
operational (link up) physical ports is less than tnLagPortThreshold.
When a physical port ifOperStatus c… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.4 |
| tnLagEnableMarkerGenerator enables (true(1)) or disables (false(2)) the Marker Generator
protocol. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.5 |
| tnLagEnableLACP enables (true(1)) or disables (false(2)) the Link Aggregation Control
Protocol (LACP). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.6 |
| tnLagDescription discription text for the Link Aggregation Group port. | column | TN-TC-MIBTItemLongDescription | .1.3.6.1.4.1.7483.6.1.2.15.2.1.7 |
| tnLagDynamicCosting When dynamic cost and OSPF autocost are both configured then costing
is applied based on the total number of links configured and the cost
is advertised inversely proportional to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.15.2.1.8 |
| tnLagLACPMode tnLagLACPMode represents the mode in which LACP will operate.
If the value is set to 'passive', LACP places all member ports of a
lag into a passive negotiating state. When this i… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.15.2.1.9 |