tmnxOamVccvPingCtlTable
TIMETRA-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.3.1.2.11.1.17
Object
table
Each row in tmnxOamVccvPingCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) ping test. The rest of the configuration
information needed to launch the test resides in the corresponding row
of tmnxOamPingCtlTable.
Four types of VCCV ping tests are supported: AII Type 2, FEC-128
Pseudowire, Spoke SDP FEC, and Transport Profile Static. AII Type 2
and Spoke SDP FEC offer two ways to specify a VCCV ping FEC-129
Pseudowire test.
In the Transport Profile Static case, the test type is configured
(using tmnxOamVccvPingCtlTestSubMode). In the other three cases, the
test type is not configured (i.e. the default
tmnxOamVccvPingCtlTestSubMode value 'unspecified(1)' is used).
The following table has a row for each VCCV ping test type, showing
the mandatory and optional objects applicable to the test type.
Abbreviated VCCV ping test type names are used.
Test
Type Mandatory Objects Optional Objects
------ ------------------------------ ---------------------------------
aiiTY2 tmnxOamVccvPingCtlSaiiAcId *tmnxOamPingCtlSrcAddrType
tmnxOamVccvPingCtlSaiiGlobalId *tmnxOamPingCtlSrcAddress
tmnxOamVccvPingCtlSaiiPrefix *tmnxOamPingCtlTgtAddrType
tmnxOamVccvPingCtlTaiiAcId *tmnxOamPingCtlTgtAddress
tmnxOamVccvPingCtlTaiiGlobalId tmnxOamVccvPingCtlReplyMode
tmnxOamVccvPingCtlTaiiPrefix
FEC128 tmnxOamVccvPingCtlSdpIdVcId *tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
*tmnxOamPingCtlTgtAddrType
*tmnxOamPingCtlTgtAddress
*tmnxOamVccvPingCtlPwId
tmnxOamVccvPingCtlReplyMode
#tmnxOamVccvPingCtlSwitTgtFecType
#tmnxOamVccvPgTgStaticCtlAgi
#tmnxOamVccvPgTgStaticCtlSaiiGlbl
#tmnxOamVccvPgTgStaticCtlSaiiNode
#tmnxOamVccvPgTgStaticCtlSaiiAcId
#tmnxOamVccvPgTgStaticCtlTaiiGlbl
#tmnxOamVccvPgTgStaticCtlTaiiNode
#tmnxOamVccvPgTgStaticCtlTaiiAcId
sdpFEC tmnxOamVccvPingCtlSpokeSdpId *tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
*tmnxOamPingCtlTgtAddrType
*tmnxOamPingCtlTgtAddress
#tmnxOamVccvPingCtlSaiiAcId
#tmnxOamVccvPingCtlSaiiGlobalId
#tmnxOamVccvPingCtlSaiiPrefix
#tmnxOamVccvPingCtlTaiiAcId
#tmnxOamVccvPingCtlTaiiGlobalId
#tmnxOamVccvPingCtlTaiiPrefix
tmnxOamVccvPingCtlReplyMode
TPST tmnxOamVccvPingCtlSdpIdVcId *tmnxOamPingCtlSrcAddrType
tmnxOamVccvPingCtlTestSubMode *tmnxOamPingCtlSrcAddress
tmnxOamVccvPingCtlAssocChannel
#tmnxOamVccvPingCtlMplsTpGlobalId
#tmnxOamVccvPingCtlMplsTpNodeId
^tmnxOamVccvPingCtlSwitTgtFecType
^tmnxOamVccvPgTgFec128CtlSrcAddrT
^tmnxOamVccvPgTgFec128CtlSrcAddr
^tmnxOamVccvPgTgFec128CtlDstAddrT
^tmnxOamVccvPgTgFec128CtlDstAddr
^tmnxOamVccvPgTgFec128CtlPwId
^tmnxOamVccvPgTgFec128CtlPwType
ALL N/A tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlProfile
tmnxOamPingCtlSize
tmnxOamPingCtlTimeOut
tmnxOamVccvPingCtlTtl
------ ------------------------------ ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all four VCCV ping
test types.
2. The characters '*', '#', and '^' each mark an independent set of
optional objects which must all be specified, or must all be
unspecified.
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail.
Context
- MIB
- TIMETRA-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.11.1.17- Type
- table
- Status
- current
- Parent
- tmnxOamPingObjs
- Siblings
- 32
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPingNotificationObjects | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.1 |
| tmnxOamVprnPingCtlTable tmnxOamVprnPingCtlTable contains configuration information for
'vprnPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.10 |
| tmnxOamAtmPingCtlTable tmnxOamAtmPingCtlTable contains configuration information for
'atmPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.11 |
| tmnxOamMfibPingCtlTable tmnxOamMfibPingCtlTable contains configuration information for
'mfibPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.12 |
| tmnxOamCpePingCtlTable tmnxOamCpePingCtlTable contains configuration information for
'cpePing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.13 |
| tmnxOamMRInfoRespTable tmnxOamMRInfoRespTable contains node-level information provided by
destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.14 |
| tmnxOamMRInfoRespIfTable tmnxOamMRInfoRespIfTable contains interface-level information provided
by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.15 |
| tmnxOamMRInfoRespIfNbrTable tmnxOamMRInfoRespIfNbrTable contains neighbor-level information
provided by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.16 |
| tmnxOamIcmpPingCtlTable tmnxOamIcmpPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for ICMP ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.18 |
| tmnxOamAncpTestCtlTable tmnxOamAncpTestCtlTable contains configuration information for
'ancpLoopback' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.19 |
| tmnxOamPingMaxConcurrentTests The maximum number of concurrent active OAM ping tests
that are allowed within an agent implementation. A value of
zero (0) for this object implies that there is no limit for
the… | scalar | tests SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.2 |
| tmnxOamAncpTestHistoryTable Defines a table for storing the results of an OAM ANCP test.
An entry in this table is created when the result of an OAM ANCP test
is determined.
An entry is… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.20 |
| tmnxOamP2mpLspPingCtlTable tmnxOamP2mpLspPingCtlTable (along with tmnxOamPingCtlTable) contains
the configuration information for Point-to-Multipoint (P2MP) Label
Switched Path (LSP) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.21 |
| tmnxOamP2mpLspPingIPAddressTable tmnxOamP2mpLspPingIPAddressTable contains configured destination IP
addresses for 'p2mpLspPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.22 |
| tmnxOamEthCfmPingCtlTable tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and
'ethCfmTwoWaySlm' tests.
This table ex… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.23 |
| tmnxOamVccvPgTgFec128CtlTable tmnxOamVccvPgTgFec128CtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream FEC (Forward Equivalence C… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.24 |
| tmnxOamVccvPgTgStaticCtlTable tmnxOamVccvPgTgStaticCtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream static (i.e. MPLS-TP) segm… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.25 |
| tmnxOamVxlanPingCtlTable tmnxOamVxlanPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for VXLAN (Virtual Extensible Local Area
Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.26 |
| tmnxOamVxlanPingHistoryTable tmnxOamVxlanPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the information obtained from Virtual Extensible Local Area
Network (VXLAN) Echo Reply PDUs. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.27 |
| tmnxOamBfdOnLspPingResultsTable tmnxOamBfdOnLspPingResultsTable contains the information obtained
during the RFC 5884 procedures used to bootstrap and periodically
verify Bidirectional Forwarding Detection (BFD)… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.28 |
| tmnxOamVxlanPingResultsTable tmnxOamVxlanPingResultsTable contains results of VXLAN (Virtual
Extensible Local Area Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.29 |
| tmnxOamPingCtlTable tmnxOamPingCtlTable contains configuration and status information for
ping tests.
tmnxOamDiagCtlTable and tmnxOamTrCtlTable fill the same role for
diagnostic tests and … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.3 |
| tmnxOamPingReadOnlyScalars | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.30 |
| tmnxOamBierPingCtlTable tmnxOamBierPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for BIER (Bit Index Explicit Replication)
ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.31 |
| tmnxOamBierPingBfrPfxCtlTable tmnxOamBierPingBfrPfxCtlTable contains IP destination addresses (i.e.
Bit-Forwarding Router (BFR) prefixes) for BIER ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.32 |
| tmnxOamBierPingHistoryTable tmnxOamBierPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the per-probe results for Bit Index Explicit Replication
(BIER) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.33 |
| tmnxOamPingResultsTable tmnxOamPingResultsTable contains the run-level test results for OAM
ping tests.
Probe-level test results for ping tests reside in
tmnxOamPingHistoryTable. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.4 |
| tmnxOamPingHistoryTable tmnxOamPingHistoryTable contains the per-probe results for most ping
test types. Exceptions are noted in the tmnxOamPingCtlTestMode
DESCRIPTION clause. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.5 |
| tmnxOamMacPingCtlTable tmnxOamMacPingCtlTable contains configuration information for
'macPing', 'macPopulate', and 'macPurge' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.6 |
| tmnxOamMacPingHistoryTable Defines a table for storing the results of an OAM 'macPing' probe
operation.
An entry in this table is created when the result of an OAM 'macPing'
probe is determined.
… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.7 |
| tmnxOamMacPingL2MapTable obsolete This object was marked obsolete in SROS Release 6.1. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.8 |
| tmnxOamLspPingCtlTable Each row in tmnxOamLspPingCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
ping test. The rest of the configuration info… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamVccvPingCtlEntry The system creates a row in tmnxOamVccvPingCtlTable when a row is
created in tmnxOamPingCtlTable with tmnxOamPingCtlTestMode set to
'vccvPing'.
The system deletes a r… | row | - | .1.3.6.1.4.1.6527.3.1.2.11.1.17.1 |