tmnxOamLspPingCtlTable
TIMETRA-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.3.1.2.11.1.9
Object
table
Each row in tmnxOamLspPingCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
ping test. The rest of the configuration information needed to launch
the test resides in the corresponding row of tmnxOamPingCtlTable.
Seven types of LSP ping tests are supported. An abbreviated name for
each test type is defined in the following table (for use in a
subsequent table). The test type's tmnxOamLspPingCtlTestSubMode code
point is shown as well.
Test Sub Mode Abbreviated Test Type Name(s)
--------------------- -------------------------------
'unspecified (1)' LDP, RSVP
'static (2)' TPST (Transport Profile Static)
'bgpLabeledPrefix(3)' BGP
'srIsis (4)' ISIS
'srOspf (5)' OSPF
'srTe (6)' SRTE
'srPolicy (7)' SRPL
'srOspf3 (8)' OSP3
The following table has a row for each LSP ping test type, showing the
mandatory and optional objects applicable to the test type.
Test
Type Mandatory Objects Optional Objects
---- -------------------------------- ---------------------------------
BGP tmnxOamLspPingCtlLdpPrefixType *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlLdpPrefixLen tmnxOamLspPingCtlNhIntfName
tmnxOamLspPingCtlTestSubMode #tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
ISIS tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
LDP tmnxOamLspPingCtlLdpPrefixType *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlLdpPrefixLen tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
OSPF tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
OSP3 tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
RSVP tmnxOamLspPingCtlLspName tmnxOamLspPingCtlPathName
SRPL tmnxOamLspPingCtlSrPlcyColor tmnxOamLspPingCtlSrPlcySegList
tmnxOamLspPingCtlSrPlcyEndPtAddr
tmnxOamLspPingCtlSrPlcyEndPtAddT
tmnxOamLspPingCtlTestSubMode
SRTE tmnxOamLspPingCtlLspName *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlTestSubMode *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
tmnxOamLspPingCtlPathName
TPST tmnxOamLspPingCtlLspName tmnxOamLspPingCtlAssocChannel
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlForce
*tmnxOamLspPingCtlMplsTpGlobalId
*tmnxOamLspPingCtlMplsTpNodeId
tmnxOamLspPingCtlMplsTpPathType
ALL none tmnxOamLspPingCtlTtl
tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlProfile
tmnxOamPingCtlSize
*tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
tmnxOamPingCtlTimeOut
---- -------------------------------- ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all LSP ping test
types.
2. Asterisks (*) mark a set of optional objects which must all be
specified, or must all be unspecified.
3. Octothorpes (#) mark a separate set of optional objects which must
all be specified, or must all be unspecified.
4. There are four supported combinations of
tmnxOamLspPingCtlNhAddressType, tmnxOamLspPingCtlNhAddress,
tmnxOamLspPingCtlNhIntfName, tmnxOamLspPingCtlPathDestType, and
tmnxOamLspPingCtlPathDest, as follows:
a) all unspecified
b) tmnxOamLspPingCtlPathDestType and tmnxOamLspPingCtlPathDest
c) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest, and
tmnxOamLspPingCtlNhIntfName
d) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest,
tmnxOamLspPingCtlNhAddressType, and tmnxOamLspPingCtlNhAddress
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail.
Context
- MIB
- TIMETRA-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.11.1.9- Type
- table
- Status
- current
- Parent
- tmnxOamPingObjs
- Siblings
- 32
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPingNotificationObjects | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.1 |
| tmnxOamVprnPingCtlTable tmnxOamVprnPingCtlTable contains configuration information for
'vprnPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.10 |
| tmnxOamAtmPingCtlTable tmnxOamAtmPingCtlTable contains configuration information for
'atmPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.11 |
| tmnxOamMfibPingCtlTable tmnxOamMfibPingCtlTable contains configuration information for
'mfibPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.12 |
| tmnxOamCpePingCtlTable tmnxOamCpePingCtlTable contains configuration information for
'cpePing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.13 |
| tmnxOamMRInfoRespTable tmnxOamMRInfoRespTable contains node-level information provided by
destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.14 |
| tmnxOamMRInfoRespIfTable tmnxOamMRInfoRespIfTable contains interface-level information provided
by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.15 |
| tmnxOamMRInfoRespIfNbrTable tmnxOamMRInfoRespIfNbrTable contains neighbor-level information
provided by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.16 |
| tmnxOamVccvPingCtlTable Each row in tmnxOamVccvPingCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) ping test. The rest o… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.17 |
| tmnxOamIcmpPingCtlTable tmnxOamIcmpPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for ICMP ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.18 |
| tmnxOamAncpTestCtlTable tmnxOamAncpTestCtlTable contains configuration information for
'ancpLoopback' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.19 |
| tmnxOamPingMaxConcurrentTests The maximum number of concurrent active OAM ping tests
that are allowed within an agent implementation. A value of
zero (0) for this object implies that there is no limit for
the… | scalar | tests SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.11.1.2 |
| tmnxOamAncpTestHistoryTable Defines a table for storing the results of an OAM ANCP test.
An entry in this table is created when the result of an OAM ANCP test
is determined.
An entry is… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.20 |
| tmnxOamP2mpLspPingCtlTable tmnxOamP2mpLspPingCtlTable (along with tmnxOamPingCtlTable) contains
the configuration information for Point-to-Multipoint (P2MP) Label
Switched Path (LSP) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.21 |
| tmnxOamP2mpLspPingIPAddressTable tmnxOamP2mpLspPingIPAddressTable contains configured destination IP
addresses for 'p2mpLspPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.22 |
| tmnxOamEthCfmPingCtlTable tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and
'ethCfmTwoWaySlm' tests.
This table ex… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.23 |
| tmnxOamVccvPgTgFec128CtlTable tmnxOamVccvPgTgFec128CtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream FEC (Forward Equivalence C… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.24 |
| tmnxOamVccvPgTgStaticCtlTable tmnxOamVccvPgTgStaticCtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream static (i.e. MPLS-TP) segm… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.25 |
| tmnxOamVxlanPingCtlTable tmnxOamVxlanPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for VXLAN (Virtual Extensible Local Area
Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.26 |
| tmnxOamVxlanPingHistoryTable tmnxOamVxlanPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the information obtained from Virtual Extensible Local Area
Network (VXLAN) Echo Reply PDUs. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.27 |
| tmnxOamBfdOnLspPingResultsTable tmnxOamBfdOnLspPingResultsTable contains the information obtained
during the RFC 5884 procedures used to bootstrap and periodically
verify Bidirectional Forwarding Detection (BFD)… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.28 |
| tmnxOamVxlanPingResultsTable tmnxOamVxlanPingResultsTable contains results of VXLAN (Virtual
Extensible Local Area Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.29 |
| tmnxOamPingCtlTable tmnxOamPingCtlTable contains configuration and status information for
ping tests.
tmnxOamDiagCtlTable and tmnxOamTrCtlTable fill the same role for
diagnostic tests and … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.3 |
| tmnxOamPingReadOnlyScalars | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.30 |
| tmnxOamBierPingCtlTable tmnxOamBierPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for BIER (Bit Index Explicit Replication)
ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.31 |
| tmnxOamBierPingBfrPfxCtlTable tmnxOamBierPingBfrPfxCtlTable contains IP destination addresses (i.e.
Bit-Forwarding Router (BFR) prefixes) for BIER ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.32 |
| tmnxOamBierPingHistoryTable tmnxOamBierPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the per-probe results for Bit Index Explicit Replication
(BIER) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.33 |
| tmnxOamPingResultsTable tmnxOamPingResultsTable contains the run-level test results for OAM
ping tests.
Probe-level test results for ping tests reside in
tmnxOamPingHistoryTable. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.4 |
| tmnxOamPingHistoryTable tmnxOamPingHistoryTable contains the per-probe results for most ping
test types. Exceptions are noted in the tmnxOamPingCtlTestMode
DESCRIPTION clause. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.5 |
| tmnxOamMacPingCtlTable tmnxOamMacPingCtlTable contains configuration information for
'macPing', 'macPopulate', and 'macPurge' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.6 |
| tmnxOamMacPingHistoryTable Defines a table for storing the results of an OAM 'macPing' probe
operation.
An entry in this table is created when the result of an OAM 'macPing'
probe is determined.
… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.7 |
| tmnxOamMacPingL2MapTable obsolete This object was marked obsolete in SROS Release 6.1. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.8 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamLspPingCtlEntry The system creates a row in tmnxOamLspPingCtlTable when
tmnxOamPingCtlTestMode is set to 'lspPing'.
The system deletes a row in tmnxOamLspPingCtlTable when the
corres… | row | - | .1.3.6.1.4.1.6527.3.1.2.11.1.9.1 |