tmnxOamPingMaxConcurrentTests
TIMETRA-OAM-TEST-MIB ·
.1.3.6.1.4.1.6527.3.1.2.11.1.2
Object
The maximum number of concurrent active OAM ping tests that are allowed within an agent implementation. A value of zero (0) for this object implies that there is no limit for the number of concurrent active tests in effect.
Context
- MIB
- TIMETRA-OAM-TEST-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.11.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- tests
- Parent
- tmnxOamPingObjs
- Siblings
- 32
Syntax
tests SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPingNotificationObjects | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.1 |
| tmnxOamVprnPingCtlTable tmnxOamVprnPingCtlTable contains configuration information for
'vprnPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.10 |
| tmnxOamAtmPingCtlTable tmnxOamAtmPingCtlTable contains configuration information for
'atmPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.11 |
| tmnxOamMfibPingCtlTable tmnxOamMfibPingCtlTable contains configuration information for
'mfibPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.12 |
| tmnxOamCpePingCtlTable tmnxOamCpePingCtlTable contains configuration information for
'cpePing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.13 |
| tmnxOamMRInfoRespTable tmnxOamMRInfoRespTable contains node-level information provided by
destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.14 |
| tmnxOamMRInfoRespIfTable tmnxOamMRInfoRespIfTable contains interface-level information provided
by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.15 |
| tmnxOamMRInfoRespIfNbrTable tmnxOamMRInfoRespIfNbrTable contains neighbor-level information
provided by destination nodes of successful 'mrInfo' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.16 |
| tmnxOamVccvPingCtlTable Each row in tmnxOamVccvPingCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) ping test. The rest o… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.17 |
| tmnxOamIcmpPingCtlTable tmnxOamIcmpPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for ICMP ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.18 |
| tmnxOamAncpTestCtlTable tmnxOamAncpTestCtlTable contains configuration information for
'ancpLoopback' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.19 |
| tmnxOamAncpTestHistoryTable Defines a table for storing the results of an OAM ANCP test.
An entry in this table is created when the result of an OAM ANCP test
is determined.
An entry is… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.20 |
| tmnxOamP2mpLspPingCtlTable tmnxOamP2mpLspPingCtlTable (along with tmnxOamPingCtlTable) contains
the configuration information for Point-to-Multipoint (P2MP) Label
Switched Path (LSP) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.21 |
| tmnxOamP2mpLspPingIPAddressTable tmnxOamP2mpLspPingIPAddressTable contains configured destination IP
addresses for 'p2mpLspPing' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.22 |
| tmnxOamEthCfmPingCtlTable tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and
'ethCfmTwoWaySlm' tests.
This table ex… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.23 |
| tmnxOamVccvPgTgFec128CtlTable tmnxOamVccvPgTgFec128CtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream FEC (Forward Equivalence C… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.24 |
| tmnxOamVccvPgTgStaticCtlTable tmnxOamVccvPgTgStaticCtlTable contains the target information for VCCV
(Virtual Circuit Connectivity Verification) ping tests which switch to
downstream static (i.e. MPLS-TP) segm… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.25 |
| tmnxOamVxlanPingCtlTable tmnxOamVxlanPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for VXLAN (Virtual Extensible Local Area
Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.26 |
| tmnxOamVxlanPingHistoryTable tmnxOamVxlanPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the information obtained from Virtual Extensible Local Area
Network (VXLAN) Echo Reply PDUs. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.27 |
| tmnxOamBfdOnLspPingResultsTable tmnxOamBfdOnLspPingResultsTable contains the information obtained
during the RFC 5884 procedures used to bootstrap and periodically
verify Bidirectional Forwarding Detection (BFD)… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.28 |
| tmnxOamVxlanPingResultsTable tmnxOamVxlanPingResultsTable contains results of VXLAN (Virtual
Extensible Local Area Network) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.29 |
| tmnxOamPingCtlTable tmnxOamPingCtlTable contains configuration and status information for
ping tests.
tmnxOamDiagCtlTable and tmnxOamTrCtlTable fill the same role for
diagnostic tests and … | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.3 |
| tmnxOamPingReadOnlyScalars | node | - | .1.3.6.1.4.1.6527.3.1.2.11.1.30 |
| tmnxOamBierPingCtlTable tmnxOamBierPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for BIER (Bit Index Explicit Replication)
ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.31 |
| tmnxOamBierPingBfrPfxCtlTable tmnxOamBierPingBfrPfxCtlTable contains IP destination addresses (i.e.
Bit-Forwarding Router (BFR) prefixes) for BIER ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.32 |
| tmnxOamBierPingHistoryTable tmnxOamBierPingHistoryTable (along with tmnxOamPingHistoryTable)
contains the per-probe results for Bit Index Explicit Replication
(BIER) ping tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.33 |
| tmnxOamPingResultsTable tmnxOamPingResultsTable contains the run-level test results for OAM
ping tests.
Probe-level test results for ping tests reside in
tmnxOamPingHistoryTable. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.4 |
| tmnxOamPingHistoryTable tmnxOamPingHistoryTable contains the per-probe results for most ping
test types. Exceptions are noted in the tmnxOamPingCtlTestMode
DESCRIPTION clause. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.5 |
| tmnxOamMacPingCtlTable tmnxOamMacPingCtlTable contains configuration information for
'macPing', 'macPopulate', and 'macPurge' tests. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.6 |
| tmnxOamMacPingHistoryTable Defines a table for storing the results of an OAM 'macPing' probe
operation.
An entry in this table is created when the result of an OAM 'macPing'
probe is determined.
… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.7 |
| tmnxOamMacPingL2MapTable obsolete This object was marked obsolete in SROS Release 6.1. | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.8 |
| tmnxOamLspPingCtlTable Each row in tmnxOamLspPingCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
ping test. The rest of the configuration info… | table | - | .1.3.6.1.4.1.6527.3.1.2.11.1.9 |