tmnxOamPmCfgLossSlmTestId
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.4
Object
column
r/w
Unsigned32
The value of tmnxOamPmCfgLossSlmTestId specifies the test identifier
for the specified session's SLM test.
When an SLM test is created, tmnxOamPmCfgLossSlmRowStatus and
tmnxOamPmCfgLossSlmTestId must be specified in the same SNMP Set PDU.
When a Y.1731 SLM PDU is being built, the test identifier is copied
into the PDU's Test ID field.
An attempt to add a duplicate test identifier to this table will be
rejected.
Test identifier values larger than 2147483647 are reserved for
internal use.
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxOamPmCfgLossSlmEntry
- Table
- tmnxOamPmCfgLossSlmTable
- Siblings
- 12
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmCfgLossSlmRowStatus The value of tmnxOamPmCfgLossSlmRowStatus specifies the status of the
configuration row for the specified session's SLM test.
An attempt to create a row for a sessi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.1 |
| tmnxOamPmCfgLossSlmFlrThreshold The value of tmnxOamPmCfgLossSlmFlrThreshold specifies the MEF-35
Frame Loss Ratio (FLR) threshold for the specified session's SLM test.
The FLR threshold is used t… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.10 |
| tmnxOamPmCfgLossSlmTestDuration The value of tmnxOamPmCfgLossSlmTestDuration specifies the test
duration for the specified session's SLM test.
Zero specifies a test which runs until it is manually… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.11 |
| tmnxOamPmCfgLossSlmRunTimeLeft The value of tmnxOamPmCfgLossSlmRunTimeLeft indicates the run time
remaining for the specified session's SLM test.
For example, suppose an SLM test has the followin… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12 |
| tmnxOamPmCfgLossSlmHliForceCount The value of tmnxOamPmCfgLossSlmHliForceCount specifies whether or not
to count High Loss Intervals (HLIs) and Consecutive High Loss
Intervals (CHLIs) when the SLM test's MEF-35 A… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.13 |
| tmnxOamPmCfgLossSlmAdminStatus The value of tmnxOamPmCfgLossSlmAdminStatus specifies whether or not
the specified session's SLM test is administratively enabled.
If the session type (tmnxOamPmCfg… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.2 |
| tmnxOamPmCfgLossSlmOnDmndStatus The value of tmnxOamPmCfgLossSlmOnDmndStatus specifies the status of
the on-demand SLM test for the specified session.
Values:
'enabled(1)'
Set by an SNMP… | column | TIMETRA-TC-MIBTmnxEnabledDisabledOrNA | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.3 |
| tmnxOamPmCfgLossSlmInterval The value of tmnxOamPmCfgLossSlmInterval specifies the elapsed time
between transmission of Y.1731 SLM PDUs for the specified session's
SLM test. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.5 |
| tmnxOamPmCfgLossSlmDataTlvSize The value of tmnxOamPmCfgLossSlmDataTlvSize specifies the amount of
padding to be added to each launched Y.1731 SLM PDU for the specified
session's SLM test.
Zero s… | column | octets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.6 |
| tmnxOamPmCfgLossSlmTxFrmsPerDelT The value of tmnxOamPmCfgLossSlmTxFrmsPerDelT specifies the number of
Y.1731 SLM frames to send in one MEF-35 'delta_t' (also known as
'Small Time Interval') for the specified ses… | column | frames Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.7 |
| tmnxOamPmCfgLossSlmConsecDeltaTs The value of tmnxOamPmCfgLossSlmConsecDeltaTs specifies the number of
consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals')
which constitute a MEF-35 'Availability … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.8 |
| tmnxOamPmCfgLossSlmChliThreshold The value of tmnxOamPmCfgLossSlmChliThreshold specifies the MEF-35
Consecutive High Loss Interval (CHLI) threshold for the specified
session's SLM test.
An attempt … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.9 |