tmnxOamPmCfgLossSlmRunTimeLeft
TIMETRA-OAM-PM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12
Object
column
seconds Unsigned32
The value of tmnxOamPmCfgLossSlmRunTimeLeft indicates the run time
remaining for the specified session's SLM test.
For example, suppose an SLM test has the following configuration:
tmnxOamPmCfgSessType tmnxOamPmCfgLossSlmTestDuration
-------------------- --------------------------------
'onDemand(2)' 1000 (seconds)
Then, when the SLM test is started (see
tmnxOamPmCfgLossSlmOnDmndStatus), tmnxOamPmCfgLossSlmRunTimeLeft is
initialized to 1000 seconds. After a minute,
tmnxOamPmCfgLossSlmRunTimeLeft is 940 seconds.
If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned
(because a proactive test runs until it is manually stopped).
If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see
tmnxOamPmCfgLossSlmOnDmndStatus), zero is returned (because the test
is not running).
Context
- MIB
- TIMETRA-OAM-PM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- tmnxOamPmCfgLossSlmEntry
- Table
- tmnxOamPmCfgLossSlmTable
- Siblings
- 12
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxOamPmCfgLossSlmRowStatus The value of tmnxOamPmCfgLossSlmRowStatus specifies the status of the
configuration row for the specified session's SLM test.
An attempt to create a row for a sessi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.1 |
| tmnxOamPmCfgLossSlmFlrThreshold The value of tmnxOamPmCfgLossSlmFlrThreshold specifies the MEF-35
Frame Loss Ratio (FLR) threshold for the specified session's SLM test.
The FLR threshold is used t… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.10 |
| tmnxOamPmCfgLossSlmTestDuration The value of tmnxOamPmCfgLossSlmTestDuration specifies the test
duration for the specified session's SLM test.
Zero specifies a test which runs until it is manually… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.11 |
| tmnxOamPmCfgLossSlmHliForceCount The value of tmnxOamPmCfgLossSlmHliForceCount specifies whether or not
to count High Loss Intervals (HLIs) and Consecutive High Loss
Intervals (CHLIs) when the SLM test's MEF-35 A… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.13 |
| tmnxOamPmCfgLossSlmAdminStatus The value of tmnxOamPmCfgLossSlmAdminStatus specifies whether or not
the specified session's SLM test is administratively enabled.
If the session type (tmnxOamPmCfg… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.2 |
| tmnxOamPmCfgLossSlmOnDmndStatus The value of tmnxOamPmCfgLossSlmOnDmndStatus specifies the status of
the on-demand SLM test for the specified session.
Values:
'enabled(1)'
Set by an SNMP… | column | TIMETRA-TC-MIBTmnxEnabledDisabledOrNA | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.3 |
| tmnxOamPmCfgLossSlmTestId The value of tmnxOamPmCfgLossSlmTestId specifies the test identifier
for the specified session's SLM test.
When an SLM test is created, tmnxOamPmCfgLossSlmRowStatus… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.4 |
| tmnxOamPmCfgLossSlmInterval The value of tmnxOamPmCfgLossSlmInterval specifies the elapsed time
between transmission of Y.1731 SLM PDUs for the specified session's
SLM test. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.5 |
| tmnxOamPmCfgLossSlmDataTlvSize The value of tmnxOamPmCfgLossSlmDataTlvSize specifies the amount of
padding to be added to each launched Y.1731 SLM PDU for the specified
session's SLM test.
Zero s… | column | octets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.6 |
| tmnxOamPmCfgLossSlmTxFrmsPerDelT The value of tmnxOamPmCfgLossSlmTxFrmsPerDelT specifies the number of
Y.1731 SLM frames to send in one MEF-35 'delta_t' (also known as
'Small Time Interval') for the specified ses… | column | frames Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.7 |
| tmnxOamPmCfgLossSlmConsecDeltaTs The value of tmnxOamPmCfgLossSlmConsecDeltaTs specifies the number of
consecutive MEF-35 'delta_t's (also known as 'Small Time Intervals')
which constitute a MEF-35 'Availability … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.8 |
| tmnxOamPmCfgLossSlmChliThreshold The value of tmnxOamPmCfgLossSlmChliThreshold specifies the MEF-35
Consecutive High Loss Interval (CHLI) threshold for the specified
session's SLM test.
An attempt … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.9 |