vRtrMplsLspPathNextOptimize
TIMETRA-MPLS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.6.4.1.30
Object
column
seconds Unsigned32
The value of vRtrMplsLspPathNextOptimize indicates the current value of the optimize timer. This is the time, in seconds, remaining till the optimize timer will expire and optimization will be started for the LSP path.
Context
- MIB
- TIMETRA-MPLS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.6.4.1.30- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- vRtrMplsLspPathEntry
- Table
- vRtrMplsLspPathTable
- Siblings
- 78
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrMplsLspPathRowStatus The row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been as… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.6.4.1.1 |
| vRtrMplsLspPathCosSource obsolete When vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfServic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.10 |
| vRtrMplsLspPathClassOfService obsolete The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on t… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.4.1.11 |
| vRtrMplsLspPathSetupPriority The value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.12 |
| vRtrMplsLspPathHoldPriority The value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the ho… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.13 |
| vRtrMplsLspPathRecord When the value of vRtrMplsLspPathRecord is 'record', recording of all
the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecord is 'noRecord… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.14 |
| vRtrMplsLspPathHopLimit The value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.15 |
| vRtrMplsLspPathSharing obsolete When vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.16 |
| vRtrMplsLspPathAdminState The desired administrative state for this LSP path. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.6.4.1.17 |
| vRtrMplsLspPathOperState The current operational state of this LSP path. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.4.1.18 |
| vRtrMplsLspPathInheritance For each writable object in this row that can be configured to inherit
its value from its corresponding object in the vRtrMplsLspTable,
controls whether to inherit the operational… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.19 |
| vRtrMplsLspPathLastChange The sysUpTime when this row was last modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.2 |
| vRtrMplsLspPathLspId This value identifies the label switched path that is signaled for
this entry. | column | MPLS-LSR-MIBMplsLSPID | .1.3.6.1.4.1.6527.3.1.2.6.4.1.20 |
| vRtrMplsLspPathRetryTimeRemaining The time in 10-millisecond units to signal this path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.21 |
| vRtrMplsLspPathTunnelARHopListIndex Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list. A value of 0 implies that there is no recorded hop
list associated with this LSP path. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.22 |
| vRtrMplsLspPathNegotiatedMTU The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.23 |
| vRtrMplsLspPathFailCode The value of vRtrMplsLspPathFailCode indicates the reason code for LSP
Path failure. A value of 0 indicates that no failure has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.4.1.24 |
| vRtrMplsLspPathFailNodeAddr The value of vRtrMplsLspPathFailNodeAddr indicates the IP address of
the node in the LSP path at which the LSP path failed. When no failure
has occurred, this value is 0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.6.4.1.25 |
| vRtrMplsLspPathAdminGroupInclude The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when this LSP
path is setup. If bit 'n' is set, then the a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.26 |
| vRtrMplsLspPathAdminGroupExclude The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when this LSP
path is setup. If bit 'n' is set, then the a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.27 |
| vRtrMplsLspPathAdaptive Setting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.
Setting the value to 'false', disables make-before… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.28 |
| vRtrMplsLspPathOptimizeTimer The value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSP path.
When CSPF is enabled… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.29 |
| vRtrMplsLspPathType This variable is an enum that represents the role this path is taking
within this LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.3 |
| vRtrMplsLspPathOperBandwidth The value of vRtrMplsLspPathOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational LSP path.
When… | column | megabps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.31 |
| vRtrMplsLspPathMBBState obsolete The value of vRtrMplsLspPathMBBState indicates the state of the most
recent invocation of the make-before-break functionality.
Possible states are:
n… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.32 |
| vRtrMplsLspPathResignal Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the resignaling of the LSP path.
If the LSP path is operationally down either due to network fai… | column | TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.33 |
| vRtrMplsLspPathTunnelCRHopListIndex Primary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there is no
computed hop list associated with this LSP path. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.34 |
| vRtrMplsLspPathOperMTU The value of vRtrMplsLspPathOperMTU indicates the size for the Maximum
transmission unit (MTU) that is currently operation for this LSP Path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.35 |
| vRtrMplsLspPathRecordLabel When the value of vRtrMplsLspPathRecordLabel is 'record', recording of
labels at each node that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecordL… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.36 |
| vRtrMplsLspPathSrlg The value of vRtrMplsLspPathSrlg specifies whether the use of SRLG
constraint in the computation of a secondary path for an LSP at the
head-end Label Edge Router (LER) is enabled.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.37 |
| vRtrMplsLspPathSrlgDisjoint The value of vRtrMplsLspPathSrlgDisjoint indicates whether the
relevant standby lsp path is SRLG disjoint from the associated primary
lsp path for an LSP at the head-end Label Edg… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.38 |
| vRtrMplsLspPathLastResigAttempt The value of vRtrMplsLspPathLastResigAttempt indicates the sysUpTime
when the last attempt to resignal this LSP was made. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.39 |
| vRtrMplsLspPathCos obsolete The configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 2… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.4 |
| vRtrMplsLspPathMetric The value of vRtrMplsLspPathMetric indicates the cost of the traffic
engineered path returned by the IGP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.40 |
| vRtrMplsLspPathLastMBBType The value of vRtrMplsLspPathLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.41 |
| vRtrMplsLspPathLastMBBEnd The value of vRtrMplsLspPathLastMBBEnd indicates the sysUpTime when
the last MBB ended. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.42 |
| vRtrMplsLspPathLastMBBMetric The value of vRtrMplsLspPathLastMBBMetric indicates the
cost of the traffic engineered path for the LSP path prior to MBB. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.43 |
| vRtrMplsLspPathLastMBBState The value of vRtrMplsLspPathLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.44 |
| vRtrMplsLspPathMBBTypeInProg The value of vRtrMplsLspPathMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress. | column | TmnxMplsMBBType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.45 |
| vRtrMplsLspPathMBBStarted The value of vRtrMplsLspPathMBBStarted indicates the sysUpTime when
the in-progress MBB started. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.46 |
| vRtrMplsLspPathMBBNextRetry The value of vRtrMplsLspPathMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.47 |
| vRtrMplsLspPathMBBRetryAttempts The value of vRtrMplsLspPathMBBRetryAttempts indicates 'n' where nth
attempt for the MBB is in progress. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.48 |
| vRtrMplsLspPathMBBFailCode The value of vRtrMplsLspPathMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.4.1.49 |
| vRtrMplsLspPathProperties The set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.6.4.1.5 |
| vRtrMplsLspPathMBBFailNodeArType The value of vRtrMplsLspPathMBBFailNodeArType indicates the type of
vRtrMplsLspPathMBBFailNodeAddr. A value of 'unknown' indicates that no
failure has occurred. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.50 |
| vRtrMplsLspPathMBBFailNodeAddr The value of vRtrMplsLspPathMBBFailNodeAddr indicates the IP address
of the node in the LSP path at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsLspPathMBBFa… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.4.1.51 |
| vRtrMplsLspPathClassType The value of vRtrMplsLspPathClassType specifies the class type (CT)
associated with this LSP path. When the vRtrMplsLspPathClassType
bit in vRtrMplsLspPathInheritance is cleared… | column | TIMETRA-TC-MIBTmnxRsvpDSTEClassType | .1.3.6.1.4.1.6527.3.1.2.6.4.1.52 |
| vRtrMplsLspPathOperMetric The value of vRtrMplsLspPathOperMetric indicates the operational
metric for the LSP path. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.53 |
| vRtrMplsLspPathResignalEligible The value of vRtrMplsLspPathResignalEligible indicates that the LSP
path is eligible for resignaling on the basis of available bandwidth. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.54 |
| vRtrMplsLspPathIsFastRetry The value of vRtrMplsLspPathIsFastRetry indicates which retry timer is
being referred to by vRtrMplsLspPathRetryTimeRemaining.
When the value of vRtrMplsLspPathIsFa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.55 |
| vRtrMplsLspPathBackupCT The value of vRtrMplsLspPathBackupCT specifies the backup class type
(CT) associated with the LSP. A value of -1 indicates that no backup
class type has been configured for the LS… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.56 |
| vRtrMplsLspPathMainCTRetryRem The value of vRtrMplsLspPathMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.57 |
| vRtrMplsLspPathOperCT The value of vRtrMplsLspPathOperCT indicates operational class type
(CT) associated with the LSP. A value of -1 indicates that no
operational class type has been configured for th… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.58 |
| vRtrMplsLspPathNewPathIndex The value of vRtrMplsLspPathNewPathIndex specifies the index for the
new path in mplsTunnelTable. | column | MPLS-TE-MIBMplsTunnelIndex | .1.3.6.1.4.1.6527.3.1.2.6.4.1.59 |
| vRtrMplsLspPathBandwidth The value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in megabits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
ban… | column | megabps Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.6 |
| vRtrMplsLspPathMBBMainCTRetryRem The value of vRtrMplsLspPathMBBMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.60 |
| vRtrMplsLspPathSigBWMBBInProg The value of vRtrMplsLspPathSigBWMBBInProg indicates the bandwidth
used to signal the MBB currently in progress. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.61 |
| vRtrMplsLspPathSigBWLastMBB The value of vRtrMplsLspPathSigBWLastMBB indicates the bandwidth used
to signal the last MBB that occurred. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.62 |
| vRtrMplsLspPathActiveByManual The value of vRtrMplsLspPathActiveByManual indicates whether
a secondary standby path has become the active LSP path
due to manual intervention. When vRtrMplsLspSwitchStbyPath is… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.63 |
| vRtrMplsLspPathTimeoutIn The value of vRtrMplsLspPathTimeoutIn indicates the amount of time
remaining, in seconds, for the LSP path state to time out after the
initial PATH message has been sent. If the t… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.64 |
| vRtrMplsLspPathMBBTimeoutIn The value of vRtrMplsLspPathMBBTimeoutIn indicates the amount of time
remaining, in seconds, for the in-progress MBB path state to time out
after the initial PATH message has been… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.65 |
| vRtrMplsLspPathBfdTemplateName The value of vRtrMplsLspPathBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP path. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.6.4.1.66 |
| vRtrMplsLspPathBfdEnable The value of vRtrMplsLspPathBfdEnable specifies whether BFD is enabled
or not for this LSP path. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.67 |
| vRtrMplsLspPathBfdPingIntvl The value of vRtrMplsLspPathBfdPingIntvl specifies the time interval
for periodic LSP ping for BFD bootstrapping.
The object vRtrMplsLspPathBfdPingIntvl is applicab… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.68 |
| vRtrMplsLspPathLastUpdateTime The value of vRtrMplsLspPathLastUpdateTime indicates the sysUpTime
when the last update occurred | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.6.4.1.69 |
| vRtrMplsLspPathBwProtect obsolete When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guara… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.6.4.1.7 |
| vRtrMplsLspPathLastUpdateId The value of vRtrMplsLspPathLastUpdateId indicates the last update ID
which was processed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.70 |
| vRtrMplsLspPathLastUpdateState The value of vRtrMplsLspPathLastUpdateState indicates whether the last
update was successful or failed.
Possible states are
none (1) - no update invoked
success (… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.71 |
| vRtrMplsLspPathLastUpdFailCode The value of vRtrMplsLspPathLastUpdFailCode indicates the reason code
for in-progress update failure.
A value of 'none' indicates that no failure has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.4.1.72 |
| vRtrMplsLspPathBfdUpWaitTimer The value of vRtrMplsLspPathBfdUpWaitTimer specifies the time in
seconds the software will wait for the BFD session to come up.
The timer object is applicable for L… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.73 |
| vRtrMplsLspPathBfdUpWaitTmLeft The value of vRtrMplsLspPathBfdUpWaitTmLeft indicates the time in
seconds remaining in the vRtrMplsLspPathBfdUpWaitTimer. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.74 |
| vRtrMplsLspPathBfdState The value of vRtrMplsLspPathBfdState indicates state of the BFD
session on the LSP path. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.75 |
| vRtrMplsLspPathBfdStartFailRsn The value of vRtrMplsLspPathBfdStartFailRsn indicates the failure
reason when vRtrMplsLspPathBfdState is value 'failToStart'. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.6.4.1.76 |
| vRtrMplsLspPathBfdOperUpWaitTmr The value of vRtrMplsLspPathBfdOperUpWaitTmr indicates operational
value of the time in seconds the software will wait for the BFD
session to come up.
When value of… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.77 |
| vRtrMplsLspPathSelfPingOprState The current operational state for self-ping for this LSP path. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.6.4.1.78 |
| vRtrMplsLspPathLastMBBFailCode The value of vRtrMplsLspPathLastMBBFailCode indicates the reason code
for last MBB failure before retry limit exceeded. A value of 0
indicates that no failure has occurred. | column | TmnxMplsLspFailCode | .1.3.6.1.4.1.6527.3.1.2.6.4.1.79 |
| vRtrMplsLspPathState The current working state of this path within this LSP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.6.4.1.8 |
| vRtrMplsLspPathPreference When there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for load… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.6.4.1.9 |