tmnxL2tpXtTuSelBlacklistMaxTime
TIMETRA-L2TP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.4
Object
column
r/w
minutes Integer32
The value of tmnxL2tpXtTuSelBlacklistMaxTime specifies the maximum time a tunnel or peer may remain in the tunnel-selection-blacklist.
Context
- MIB
- TIMETRA-L2TP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- tmnxL2tpXtEntry
- Table
- tmnxL2tpXtTable
- Siblings
- 12
Syntax
minutes Integer32
Values & Constraints
Object Constraints
range: 1-60
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxL2tpXtNextAttempt The value of tmnxL2tpXtNextAttempt specifies the next tunnel to be
used in case the session setup fails.
A value of 'samePreferenceLevel(0)' specifies to try first … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.1 |
| tmnxL2tpXtDfBitLac The value of tmnxL2tpXtDfBitLac specifies if this system sets the DF
(Don't Fragment) bit in the IP header of the data traffic sent from
the LAC to the LNS.
If the … | column | TmnxAlwaysOrNever | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.10 |
| tmnxL2tpXtFoRecoveryMethod The value of the object tmnxL2tpXtFoRecoveryMethod specifies the
method to be used for the recovery of stateful information about L2TP
tunnels and sessions associated with this vi… | column | TmnxL2tpFailoverRecoveryMethod | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.11 |
| tmnxL2tpXtFoRecoveryTime The value of tmnxL2tpXtFoRecoveryTime specifies the period of time
period of time that an endpoint asks its peer to wait before assuming
the recovery process has failed.
… | column | seconds TmnxL2tpFailoverRecoveryTime | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.12 |
| tmnxL2tpXtFoRecoveryMaxSeLifeT The value of tmnxL2tpXtFoRecoveryMaxSeLifeT specifies the subset of
sessions that this system attempts to synchronize in the Session State
Synchronization phase as described in RF… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.13 |
| tmnxL2tpXtLastMgmtChange The value of tmnxL2tpXtLastMgmtChange indicates the sysUpTime at the
time of the most recent management-initiated change to this table row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.2 |
| tmnxL2tpXtTuSelBlacklistReason The value of tmnxL2tpXtTuSelBlacklistReason specifies the CDN or StopCCN
result codes or tunnel or session setup failure condition that determine
which tunnels are added to the t… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.3 |
| tmnxL2tpXtTuSelBlacklistLength The value of tmnxL2tpXtTuSelBlacklistLength specifies how many items
(tunnels or peers) can be in the tunnel-selection-blacklist.
If a tunnel or peer needs to be ad… | column | minutes Integer32 | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.5 |
| tmnxL2tpXtTuSelBlacklistToAction The value of tmnxL2tpXtTuSelBlacklistToAction specifies the action to
be taken when a tunnel has been in the tunnel-selection-blacklist for
the time specified in tmnxL2tpXtTuSelBl… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.6 |
| tmnxL2tpXtReplaceResultCodes The value of tmnxL2tpXtReplaceResultCodes specifies the return codes
that must be replaced by another appropriate result code. This field
is typically used to solve interoperabili… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.7 |
| tmnxL2tpXtAvpCiscoNasPortEth The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put
in the Cisco-NAS-Port AVP, for L2TP control messages related to a
PPPoE session in this L2TP protocol instan… | column | TIMETRA-TC-MIBTmnxBinarySpecification | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.8 |
| tmnxL2tpXtAvpCiscoNasPortAtm The value of tmnxL2tpXtAvpCiscoNasPortAtm specifies what string to put
in the Cisco-NAS-Port AVP, for L2TP control messages related to a
PPPoA (PPP over ATM) session in this L2TP … | column | TIMETRA-TC-MIBTmnxBinarySpecification | .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.9 |