tmnxL2tpXtFoRecoveryMaxSeLifeT

Object

column r/w minutes Unsigned32

The value of tmnxL2tpXtFoRecoveryMaxSeLifeT specifies the subset of
sessions that this system attempts to synchronize in the Session State
Synchronization phase as described in RFC 4951 'Fail Over Extensions
for Layer 2 Tunneling Protocol (L2TP)'.
              
This system will only synchronize the sessions with a lifetime shorter
than or equal to the value of tmnxL2tpXtFoRecoveryMaxSeLifeT.
              
The lifetime taken into account is the lifetime at the moment the
system is triggered to start recovery.
              
The value of is only relevant while the value of
tmnxL2tpXtFoRecoveryMethod is equal to 'recoveryTunnel'.

Context

MIB: TIMETRA-L2TP-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.13
Type: column
Access: readwrite
Status: current
Units: minutes
Parent: tmnxL2tpXtEntry
Table: tmnxL2tpXtTable
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tmnxL2tpXtNextAttempt The value of tmnxL2tpXtNextAttempt specifies the next tunnel to be used in case the session setup fails. A value of 'samePreferenceLevel(0)' specifies to try first …	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.1`
tmnxL2tpXtDfBitLac The value of tmnxL2tpXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS. If the …	column	TmnxAlwaysOrNever	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.10`
tmnxL2tpXtFoRecoveryMethod The value of the object tmnxL2tpXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this vi…	column	TmnxL2tpFailoverRecoveryMethod	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.11`
tmnxL2tpXtFoRecoveryTime The value of tmnxL2tpXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. …	column	seconds TmnxL2tpFailoverRecoveryTime	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.12`
tmnxL2tpXtLastMgmtChange The value of tmnxL2tpXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.2`
tmnxL2tpXtTuSelBlacklistReason The value of tmnxL2tpXtTuSelBlacklistReason specifies the CDN or StopCCN result codes or tunnel or session setup failure condition that determine which tunnels are added to the t…	column	Bits	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.3`
tmnxL2tpXtTuSelBlacklistMaxTime The value of tmnxL2tpXtTuSelBlacklistMaxTime specifies the maximum time a tunnel or peer may remain in the tunnel-selection-blacklist.	column	minutes Integer32	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.4`
tmnxL2tpXtTuSelBlacklistLength The value of tmnxL2tpXtTuSelBlacklistLength specifies how many items (tunnels or peers) can be in the tunnel-selection-blacklist. If a tunnel or peer needs to be ad…	column	minutes Integer32	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.5`
tmnxL2tpXtTuSelBlacklistToAction The value of tmnxL2tpXtTuSelBlacklistToAction specifies the action to be taken when a tunnel has been in the tunnel-selection-blacklist for the time specified in tmnxL2tpXtTuSelBl…	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.6`
tmnxL2tpXtReplaceResultCodes The value of tmnxL2tpXtReplaceResultCodes specifies the return codes that must be replaced by another appropriate result code. This field is typically used to solve interoperabili…	column	Bits	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.7`
tmnxL2tpXtAvpCiscoNasPortEth The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoE session in this L2TP protocol instan…	column	TIMETRA-TC-MIBTmnxBinarySpecification	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.8`
tmnxL2tpXtAvpCiscoNasPortAtm The value of tmnxL2tpXtAvpCiscoNasPortAtm specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoA (PPP over ATM) session in this L2TP …	column	TIMETRA-TC-MIBTmnxBinarySpecification	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects