tmnxL2tpXtTuSelBlacklistLength

TIMETRA-L2TP-MIB · .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.5

MIB view Table view

Object

column r/w minutes Integer32

The value of tmnxL2tpXtTuSelBlacklistLength specifies how many items
(tunnels or peers) can be in the tunnel-selection-blacklist.
              
If a tunnel or peer needs to be added to the
tunnel-selection-blacklist and the tunnel-selection-blacklist is full,
the system will remove the item (tunnel or peer) from the blacklist
that was in this blacklist for the longest time.
              
A value of '-1' specifies there is no limit.

Context

MIB: TIMETRA-L2TP-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.5
Type: column
Access: readwrite
Status: current
Units: minutes
Parent: tmnxL2tpXtEntry
Table: tmnxL2tpXtTable
Siblings: 12

Syntax

minutes Integer32

Values & Constraints

Object Constraints

range: -1--1 range: 1-65535

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tmnxL2tpXtNextAttempt The value of tmnxL2tpXtNextAttempt specifies the next tunnel to be used in case the session setup fails. A value of 'samePreferenceLevel(0)' specifies to try first …	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.1`
tmnxL2tpXtDfBitLac The value of tmnxL2tpXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS. If the …	column	TmnxAlwaysOrNever	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.10`
tmnxL2tpXtFoRecoveryMethod The value of the object tmnxL2tpXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this vi…	column	TmnxL2tpFailoverRecoveryMethod	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.11`
tmnxL2tpXtFoRecoveryTime The value of tmnxL2tpXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. …	column	seconds TmnxL2tpFailoverRecoveryTime	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.12`
tmnxL2tpXtFoRecoveryMaxSeLifeT The value of tmnxL2tpXtFoRecoveryMaxSeLifeT specifies the subset of sessions that this system attempts to synchronize in the Session State Synchronization phase as described in RF…	column	minutes Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.13`
tmnxL2tpXtLastMgmtChange The value of tmnxL2tpXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.2`
tmnxL2tpXtTuSelBlacklistReason The value of tmnxL2tpXtTuSelBlacklistReason specifies the CDN or StopCCN result codes or tunnel or session setup failure condition that determine which tunnels are added to the t…	column	Bits	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.3`
tmnxL2tpXtTuSelBlacklistMaxTime The value of tmnxL2tpXtTuSelBlacklistMaxTime specifies the maximum time a tunnel or peer may remain in the tunnel-selection-blacklist.	column	minutes Integer32	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.4`
tmnxL2tpXtTuSelBlacklistToAction The value of tmnxL2tpXtTuSelBlacklistToAction specifies the action to be taken when a tunnel has been in the tunnel-selection-blacklist for the time specified in tmnxL2tpXtTuSelBl…	column	Enumeration	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.6`
tmnxL2tpXtReplaceResultCodes The value of tmnxL2tpXtReplaceResultCodes specifies the return codes that must be replaced by another appropriate result code. This field is typically used to solve interoperabili…	column	Bits	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.7`
tmnxL2tpXtAvpCiscoNasPortEth The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoE session in this L2TP protocol instan…	column	TIMETRA-TC-MIBTmnxBinarySpecification	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.8`
tmnxL2tpXtAvpCiscoNasPortAtm The value of tmnxL2tpXtAvpCiscoNasPortAtm specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoA (PPP over ATM) session in this L2TP …	column	TIMETRA-TC-MIBTmnxBinarySpecification	`.1.3.6.1.4.1.6527.3.1.2.60.1.1.1.3.1.9`