tmnxDot1agCfmMepSlmTWTestStatus
TIMETRA-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.52.7.4.1.1
Object
The value of tmnxDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test.
To issue a two-way SLM test the user must issue an SNMP SET on this
object with a value 'enabled (1)'. To abort the two-way SLM test issue
an SNMP SET on this object with the value 'disabled (2)'.
A read on this object represents the current state of the two-way SLM
test:
enabled (1) - The test is actively running, and attempts at
modifying any two-way SLM object will be rejected
disabled (2) - The test is not running.
Once the test is complete this object will revert to the default value
'disabled (2)'.
Context
- MIB
- TIMETRA-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.52.7.4.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxDot1agCfmMepSlmTWTestEntry
- Table
- tmnxDot1agCfmMepSlmTWTestTable
- Siblings
- 10
Syntax
TIMETRA-TC-MIBTmnxEnabledDisabled
- Source
- TIMETRA-TC-MIBTmnxEnabledDisabled
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot1agCfmMepSlmTWTargetMepId The value of tmnxDot1agCfmMepSlmTWTargetMepId specifies the
Maintenance association End Point Identifier (MepId) of another MEP
in the same Maintenance Association that the Synthe… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.10 |
| tmnxDot1agCfmMepSlmTWLstDstMac The value of tmnxDot1agCfmMepSlmTWLstDstMac indicates the
destination MAC addressed used in the most recent two-way SLM Test.
If there is no information about a previous test run,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.11 |
| tmnxDot1agCfmMepSlmTWTestId The value of tmnxDot1agCfmMepSlmTWTestId indicates the test identifier
used to initiate the two-way Synthetic Loss Measurement (SLM) test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.2 |
| tmnxDot1agCfmMepSlmTWMacAddress The value of tmnxDot1agCfmMepSlmTWMacAddress specifies the MAC address
used as a target for the two-way Synthetic Loss Measurement (SLM)
test.
This object MUST be s… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.3 |
| tmnxDot1agCfmMepSlmTWPriority The value of tmnxDot1agCfmMepSlmTWPriority specifies the priority used
in the generated test frame for the two-way Synthetic Loss Measurement
(SLM) test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.4 |
| tmnxDot1agCfmMepSlmTWInterval The value of tmnxDot1agCfmMepSlmTWInterval, in conjunction with
tmnxDot1agCfmMepSlmTWIntrvlUnits, specifies the interval between
Synthetic Loss Measurement (SLM) messages sent by … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.5 |
| tmnxDot1agCfmMepSlmTWTimeout The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon e… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.6 |
| tmnxDot1agCfmMepSlmTWDataSize The value of tmnxDot1agCfmMepSlmTWDataSize specifies the data size, in
bytes, contained in the padding TLV for the two-way Synthetic Loss
Measurement (SLM) test. A value of zero (… | column | bytes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.7 |
| tmnxDot1agCfmMepSlmTWSendCount The value of tmnxDot1agCfmMepSlmTWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send during the two-way
SLM test. | column | packets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.8 |
| tmnxDot1agCfmMepSlmTWIntrvlUnits The value of tmnxDot1agCfmMepSlmTWIntrvlUnits, in conjunction with
tmnxDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic
Loss Measurement (SLM) messages sent by … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.9 |