tmnxDot1agCfmMepSlmTWTestEntry
TIMETRA-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.52.7.4.1
Object
row
tmnxDot1agCfmMepSlmTWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular
MEP. A row exists for each row in the dot1agCfmMepTable, and is
destroyed automatically with the removal of a row in the
dot1agCfmMepTable.
Results from a two-way SLM test are reported in
tmnxDot1agCfmMepSlmTestRsltTable with the tmnxDot1agCfmMepSlmTestType
set to 'twoWayTest (2)'.
Context
- MIB
- TIMETRA-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.52.7.4.1- Type
- row
- Status
- current
- Parent
- tmnxDot1agCfmMepSlmTWTestTable
- Table
- tmnxDot1agCfmMepSlmTWTestTable
- Children
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot1agCfmMepSlmTWTestStatus The value of tmnxDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test.
To issue a two-way SLM test the u… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.1 |
| tmnxDot1agCfmMepSlmTWTargetMepId The value of tmnxDot1agCfmMepSlmTWTargetMepId specifies the
Maintenance association End Point Identifier (MepId) of another MEP
in the same Maintenance Association that the Synthe… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.10 |
| tmnxDot1agCfmMepSlmTWLstDstMac The value of tmnxDot1agCfmMepSlmTWLstDstMac indicates the
destination MAC addressed used in the most recent two-way SLM Test.
If there is no information about a previous test run,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.11 |
| tmnxDot1agCfmMepSlmTWTestId The value of tmnxDot1agCfmMepSlmTWTestId indicates the test identifier
used to initiate the two-way Synthetic Loss Measurement (SLM) test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.2 |
| tmnxDot1agCfmMepSlmTWMacAddress The value of tmnxDot1agCfmMepSlmTWMacAddress specifies the MAC address
used as a target for the two-way Synthetic Loss Measurement (SLM)
test.
This object MUST be s… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.3 |
| tmnxDot1agCfmMepSlmTWPriority The value of tmnxDot1agCfmMepSlmTWPriority specifies the priority used
in the generated test frame for the two-way Synthetic Loss Measurement
(SLM) test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.4 |
| tmnxDot1agCfmMepSlmTWInterval The value of tmnxDot1agCfmMepSlmTWInterval, in conjunction with
tmnxDot1agCfmMepSlmTWIntrvlUnits, specifies the interval between
Synthetic Loss Measurement (SLM) messages sent by … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.5 |
| tmnxDot1agCfmMepSlmTWTimeout The value of tmnxDot1agCfmMepSlmTWTimeout specifies the timeout value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon e… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.6 |
| tmnxDot1agCfmMepSlmTWDataSize The value of tmnxDot1agCfmMepSlmTWDataSize specifies the data size, in
bytes, contained in the padding TLV for the two-way Synthetic Loss
Measurement (SLM) test. A value of zero (… | column | bytes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.7 |
| tmnxDot1agCfmMepSlmTWSendCount The value of tmnxDot1agCfmMepSlmTWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send during the two-way
SLM test. | column | packets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.8 |
| tmnxDot1agCfmMepSlmTWIntrvlUnits The value of tmnxDot1agCfmMepSlmTWIntrvlUnits, in conjunction with
tmnxDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic
Loss Measurement (SLM) messages sent by … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.4.1.9 |