tmnxDot1agCfmMepCcmPaddingSize
TIMETRA-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.52.7.1.1.31
Object
column
r/w
Unsigned32
The value of tmnxDot1agCfmMepCcmPaddingSize specifies the number of additional octets inserted into the CCM PDU for the Data TLV padding. If tmnxDot1agCfmMepCcmPaddingSize is set to zero (0), no Data TLV will be added to the CCM PDUs.
Context
- MIB
- TIMETRA-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.52.7.1.1.31- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxDot1agCfmMepEntry
- Table
- tmnxDot1agCfmMepTable
- Siblings
- 62
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 3-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot1agCfmMepSdpId The value of tmnxDot1agCfmMepSdpId specifies, along with the
tmnxDot1agCfmMepVcId, the SDP-Binding within a bridge port, to which
the MEP is attached.
This object i… | column | TIMETRA-SERV-MIBSdpId | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.1 |
| tmnxDot1agCfmMepEthAisTxCount The value of tmnxDot1agCfmMepEthAisTxCount indicates number of AIS
frames transmitted on the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.10 |
| tmnxDot1agCfmMepEthTestEnable The value of tmnxDot1agCfmMepEthTestEnable specifies whether Ethernet
test frames are to be generated on transmission or processed on
reception. If this object is set to 'false', … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.11 |
| tmnxDot1agCfmMepEthTestPattern The value of tmnxDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
specifies the data content as all zero val… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.12 |
| tmnxDot1agCfmMepEthTestMacAddr The value of tmnxDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent.
Setting this object will trigger the test … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.13 |
| tmnxDot1agCfmMepEthTestDataLen The value of tmnxDot1agCfmMepEthTestDataLen specifies the length of
the data sent in an Eth-test frame. The contents of the data is
specified by the tmnxDot1agCfmMepEthTestPattern… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.14 |
| tmnxDot1agCfmMepEthTestPriority The value of tmnxDot1agCfmMepEthTestPriority specifies the priority
used in generating Eth-Test frames. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.15 |
| tmnxDot1agCfmMepOWDTMacAddress The value of tmnxDot1agCfmMepOWDTMacAddress specifies the MAC address
used as a target for the One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.16 |
| tmnxDot1agCfmMepOWDTPriority The value of tmnxDot1agCfmMepOWDTPriority specifies the priority used
in the generated test frame for the One-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.17 |
| tmnxDot1agCfmMepTWDTMacAddress The value of tmnxDot1agCfmMepTWDTMacAddress specifies the MAC address
used as a target for the Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.18 |
| tmnxDot1agCfmMepTWDTPriority The value of tmnxDot1agCfmMepTWDTPriority specifies the priority used
in the generated test frame for the Two-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.19 |
| tmnxDot1agCfmMepVcId The value of tmnxDot1agCfmMepVcId specifies, along with
tmnxDot1agCfmMepSdpId, the SDP Binding for the bridge.
tmnxDot1agCfmMepVcId is applicable to SDP-Bindings on… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.2 |
| tmnxDot1agCfmMepSvcId The value of tmnxDot1agCfmMepSvcId specifies the service to which the
virtual MEP is attached.
tmnxDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
be… | column | TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.20 |
| tmnxDot1agCfmMepControlMep The value of tmnxDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over
which this MEP is configured. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.21 |
| tmnxDot1agCfmMepEthTestThreshold The value of tmnxDot1agCfmMepEthTestThreshold specifies when a
tmnxDot1agCfmMepEthTestComplete notification is sent. If
tmnxDot1agCfmMepEthTestThreshold is set to zero (0), a noti… | column | bit errors Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.22 |
| tmnxDot1agCfmMepOWDTThreshold The value of tmnxDot1agCfmMepOWDTThreshold specifies when a
tmnxDot1agCfmMepDMTestComplete notification is sent for a
one-way-delay test. If tmnxDot1agCfmMepOWDTThreshold is set t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.23 |
| tmnxDot1agCfmMepFaultPropagation The value of tmnxDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service
containing the MEP. It also specifies if the … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.24 |
| tmnxDot1agCfmMepFacilityIfIndex The value of tmnxDot1agCfmMepFacilityIfIndex specifies, along with
tmnxDot1agCfmMepFacilityVlanId and tmnxDot1agCfmMepFacilityType, the
port or interface associated with this MEP.… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.25 |
| tmnxDot1agCfmMepFacilityVlanId The value of tmnxDot1agCfmMepFacilityVlanId specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityType, the
encapsulation value of the port or interfac… | column | - | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.26 |
| tmnxDot1agCfmMepFacilityType The value of tmnxDot1agCfmMepFacilityType specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityVlanId,
whether the port or interface is associated wit… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.27 |
| tmnxDot1agCfmMepFcltyFaultNotify The value of tmnxDot1agCfmMepFcltyFaultNotify specifies whether or not
a fault detected on this Facility MEP will notify the port or facility
tunnel associated to this MEP.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.28 |
| tmnxDot1agCfmMepDescription The value of tmnxDot1agCfmMepDescription specifies a user supplied
detailed description for this ETH-CFM MEP. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.29 |
| tmnxDot1agCfmMepMacAddress The value of tmnxDot1agCfmMepMacAddress specifies the MAC address that
is assigned to dot1agCfmMepMacAddress. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.3 |
| tmnxDot1agCfmMepMcLagInactive The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
value of tmnxDot1agCfmMcLagStdbyInact… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.30 |
| tmnxDot1agCfmMepCcmIgnoreTLVs The value of tmnxDot1agCfmMepCcmIgnoreTLVs specifies the set of TLVs
that are received in a CCM PDU for the Remote MEP state machine of the
MEP that will be validated for format c… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.32 |
| tmnxDot1agCfmMepCsfEnable The value of tmnxDot1agCfmMepCsfEnable specifies whether received CSF
(Client Signal Fault) frames are processed by the Maintenance Entity
Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.33 |
| tmnxDot1agCfmMepCsfRxMultiplier The value of tmnxDot1agCfmMepCsfRxMultiplier specifies the receive
period multiplier used for timing out CSF, in increments of 5.
To calculate the timeout period of… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.34 |
| tmnxDot1agCfmMepCsfRxState The value of tmnxDot1agCfmMepCsfRxState indicates the state of the
received CSF frames for the MEP.
The values are:
los (0) - Client Loss of Signal
ais (1) - Client Forwar… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.35 |
| tmnxDot1agCfmMepCsfRxInterval The value of tmnxDot1agCfmMepCsfRxInterval indicates the CSF Interval
received in the most recent CSF frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.36 |
| tmnxDot1agCfmMepCsfRxCount The value of tmnxDot1agCfmMepCsfRxCount indicates the number of CSF
frames received on the MEP since the time CSF was enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.37 |
| tmnxDot1agCfmMepEthAisTxFail The value of tmnxDot1agCfmMepEthAisTxFail indicates the number of AIS
frames the MEP failed to transmit due to resource limitations. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.38 |
| tmnxDot1agCfmMepTxLbmTimeout The value of tmnxDot1agCfmMepTxLbmTimeout specifies the duration, in
seconds, before a loopback PDU sent by the node is considered to be
timed out. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.39 |
| tmnxDot1agCfmMepAisEnable The value of tmnxDot1agCfmMepAisEnable specifies whether AIS frames
are generated from the Maintenance Entity Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.4 |
| tmnxDot1agCfmMepTxLbmInterval The value of tmnxDot1agCfmMepTxLbmInterval specifies the duration,
in deciseconds, between loopback PDU transmissions. A value of zero
is only valid if there are 5 or fewer loopb… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.40 |
| tmnxDot1agCfmMepLbmPaddingSize The value of tmnxDot1agCfmMepLbmPaddingSize specifies the number of
additional octets inserted into the LBM PDU for the Data TLV padding.
If tmnxDot1agCfmMepLbmPaddingSize is set … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.41 |
| tmnxDot1agCfmMepIfSupportEnable The value of tmnxDot1agCfmMepIfSupportEnable specifies whether or not
the MEP will generate AIS PDUs when the endpoint associated to this
MEP is down regardless of CCM failures. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.42 |
| tmnxDot1agCfmMepAisLowPrioDef The value of tmnxDot1agCfmMepAisLowPrioDef specifies the lowest
priority defect that is allowed to generate an AIS frame.
When this object is 'allDef (1)', AIS fram… | column | IEEE8021-CFM-MIBDot1agCfmLowestAlarmPri | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.43 |
| tmnxDot1agCfmMepCollectLmmStats The value of tmnxDot1agCfmMepCollectLmmStats specifies whether or not
to compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and
TxFCl service frame counters for the speci… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.44 |
| tmnxDot1agCfmMepCreationOrigin The value of tmnxDot1agCfmMepCreationOrigin indicates the mechanism
which created this entry. | column | TIMETRA-TC-MIBTmnxCreateOrigin | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.45 |
| tmnxDot1agCfmMepEthTestTargMepId The value of tmnxDot1agCfmMepEthTestTargMepId specifies the
Maintenance association End Point Identifier (MepId) of another MEP in
the same Maintenance Association that the Eth-Te… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.46 |
| tmnxDot1agCfmMepEthTestLstDstMac The value of tmnxDot1agCfmMepEthTestLstDstMac indicates the
destination MAC address used in the most recent Eth-Test. If there
is no information about a previous test run, or if … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.47 |
| tmnxDot1agCfmMepOWDTTargetMepId The value of tmnxDot1agCfmMepOWDTTargetMepId specifies the Maintenance
association End Point Identifier (MepId) of another MEP in the same
Maintenance Association that the One-Way… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.48 |
| tmnxDot1agCfmMepOWDTLstDstMac The value of tmnxDot1agCfmMepOWDTLstDstMac indicates the
destination MAC addressed used in the most recent One-Way-Delay Test.
If there is no information about a previous test run… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.49 |
| tmnxDot1agCfmMepAisMegLevel The value of tmnxDot1agCfmMepAisMegLevel specifies the levels that
should be notified to suppress alarms resulting from defect conditions
detected by the MEP. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.5 |
| tmnxDot1agCfmMepTWDTTargetMepId The value of tmnxDot1agCfmMepTWDTTargetMepId specifies the Maintenance
association End Point Identifier (MepId) of another MEP in the same
Maintenance Association that the Two-Way… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.50 |
| tmnxDot1agCfmMepTWDTLstDstMac The value of tmnxDot1agCfmMepTWDTLstDstMac indicates the
destination MAC addressed used in the most recent Two-Way-Delay Test.
If there is no information about a previous test run… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.51 |
| tmnxDot1agCfmMepCollLmmFcSts The value of tmnxDot1agCfmMepCollLmmFcSts specifies which forwarding
class levels (in and out of profile combined) have enabled the
computation for Y.1731 Ethernet Loss Measuremen… | column | TIMETRA-TC-MIBTFCSet | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.52 |
| tmnxDot1agCfmMepCollLmmFcStsInP The value of tmnxDot1agCfmMepCollLmmFcStsInP specifies which
forwarding class levels (in profile only) have enabled the computation
for Y.1731 Ethernet Loss Measurement (ETH-LM) R… | column | TIMETRA-TC-MIBTFCSet | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.53 |
| tmnxDot1agCfmMepTxEthVsmGrace The value of tmnxDot1agCfmMepTxEthVsmGrace specifies whether or not
Vendor Specific Message (VSM) grace period notifications will be sent
to the ETH-CFM remote MEP peers of this l… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.54 |
| tmnxDot1agCfmMepRxEthVsmGrace The value of tmnxDot1agCfmMepRxEthVsmGrace specifies whether or not
VSM grace period notifications that are received on the local MEP
will be processed. The value 'true (1)' enab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.55 |
| tmnxDot1agCfmMepTxEthEd The value of tmnxDot1agCfmMepTxEthEd specifies whether or not Ethernet
Expect Defect (ETH-ED) PDUs will be sent to the ETH-CFM remote MEP
peers of this local MEP. The value 'true … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.56 |
| tmnxDot1agCfmMepRxEthEd The value of tmnxDot1agCfmMepRxEthEd specifies whether or not ETH-ED
PDUs that are received on the local MEP will be processed. The value
'true (1)' enables ETH-ED PDU processing,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.57 |
| tmnxDot1agCfmMepEthEdMaxDurRx The value of tmnxDot1agCfmMepEthEdMaxDurRx specifies the maximum
Expected Duration value, in seconds, that will be used to track a peer
MEP outage. This value limits the size of t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.58 |
| tmnxDot1agCfmMepEthEdPriority The value of tmnxDot1agCfmMepEthEdPriority specifies the priority
value for ETH-ED PDUs transmitted by the MEP.
If this object has the value '-1', the priority of t… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.59 |
| tmnxDot1agCfmMepAisPriority The value of tmnxDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.6 |
| tmnxDot1agCfmMepLbmSvcActResp The value of tmnxDot1agCfmMepLbmSvcActResp specifies whether or not
the MEP is capable of processing service activation streams
encapsulated in the ETH-CFM request Loopback Messag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.60 |
| tmnxDot1agCfmMepEthBnReceive The value of tmnxDot1agCfmMepEthBnReceive specifies whether or not the
reception and processing of Eth-BN (Ethernet Bandwidth Notification)
PDUs is enabled.
The val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.61 |
| tmnxDot1agCfmMepEthBnRxUpdPacing The value of tmnxDot1agCfmMepEthBnRxUpdPacing specifies the pacing of
the messages from the Eth-CFM subsystem to the QoS subsystem. The
updates will be held by the Eth-CFM subsyst… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.62 |
| tmnxDot1agCfmMepInstallMep The value of tmnxDot1agCfmMepInstallMep specifies whether or not the
MEP is installed in the forwarding plane and runs any of the Eth-CFM
State Machines.
When the v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.63 |
| tmnxDot1agCfmMepAisInterval The value of tmnxDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.7 |
| tmnxDot1agCfmMepEthRxAisInterval The value of tmnxDot1agCfmMepEthRxAisInterval indicates the AIS
Interval received in the last AIS Frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.8 |
| tmnxDot1agCfmMepEthRxAis The value of tmnxDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.9 |