tmnxDot1agCfmMepAisMegLevel
TIMETRA-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.3.1.2.52.7.1.1.5
Object
column
r/w
Bits
The value of tmnxDot1agCfmMepAisMegLevel specifies the levels that should be notified to suppress alarms resulting from defect conditions detected by the MEP.
Context
- MIB
- TIMETRA-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.52.7.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxDot1agCfmMepEntry
- Table
- tmnxDot1agCfmMepTable
- Siblings
- 62
Syntax
Bits
Values & Constraints
Enumerated Values
0 | level1 |
1 | level2 |
2 | level3 |
3 | level4 |
4 | level5 |
5 | level6 |
6 | level7 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxDot1agCfmMepSdpId The value of tmnxDot1agCfmMepSdpId specifies, along with the
tmnxDot1agCfmMepVcId, the SDP-Binding within a bridge port, to which
the MEP is attached.
This object i… | column | TIMETRA-SERV-MIBSdpId | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.1 |
| tmnxDot1agCfmMepEthAisTxCount The value of tmnxDot1agCfmMepEthAisTxCount indicates number of AIS
frames transmitted on the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.10 |
| tmnxDot1agCfmMepEthTestEnable The value of tmnxDot1agCfmMepEthTestEnable specifies whether Ethernet
test frames are to be generated on transmission or processed on
reception. If this object is set to 'false', … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.11 |
| tmnxDot1agCfmMepEthTestPattern The value of tmnxDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
specifies the data content as all zero val… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.12 |
| tmnxDot1agCfmMepEthTestMacAddr The value of tmnxDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent.
Setting this object will trigger the test … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.13 |
| tmnxDot1agCfmMepEthTestDataLen The value of tmnxDot1agCfmMepEthTestDataLen specifies the length of
the data sent in an Eth-test frame. The contents of the data is
specified by the tmnxDot1agCfmMepEthTestPattern… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.14 |
| tmnxDot1agCfmMepEthTestPriority The value of tmnxDot1agCfmMepEthTestPriority specifies the priority
used in generating Eth-Test frames. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.15 |
| tmnxDot1agCfmMepOWDTMacAddress The value of tmnxDot1agCfmMepOWDTMacAddress specifies the MAC address
used as a target for the One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.16 |
| tmnxDot1agCfmMepOWDTPriority The value of tmnxDot1agCfmMepOWDTPriority specifies the priority used
in the generated test frame for the One-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.17 |
| tmnxDot1agCfmMepTWDTMacAddress The value of tmnxDot1agCfmMepTWDTMacAddress specifies the MAC address
used as a target for the Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.18 |
| tmnxDot1agCfmMepTWDTPriority The value of tmnxDot1agCfmMepTWDTPriority specifies the priority used
in the generated test frame for the Two-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.19 |
| tmnxDot1agCfmMepVcId The value of tmnxDot1agCfmMepVcId specifies, along with
tmnxDot1agCfmMepSdpId, the SDP Binding for the bridge.
tmnxDot1agCfmMepVcId is applicable to SDP-Bindings on… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.2 |
| tmnxDot1agCfmMepSvcId The value of tmnxDot1agCfmMepSvcId specifies the service to which the
virtual MEP is attached.
tmnxDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
be… | column | TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.20 |
| tmnxDot1agCfmMepControlMep The value of tmnxDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over
which this MEP is configured. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.21 |
| tmnxDot1agCfmMepEthTestThreshold The value of tmnxDot1agCfmMepEthTestThreshold specifies when a
tmnxDot1agCfmMepEthTestComplete notification is sent. If
tmnxDot1agCfmMepEthTestThreshold is set to zero (0), a noti… | column | bit errors Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.22 |
| tmnxDot1agCfmMepOWDTThreshold The value of tmnxDot1agCfmMepOWDTThreshold specifies when a
tmnxDot1agCfmMepDMTestComplete notification is sent for a
one-way-delay test. If tmnxDot1agCfmMepOWDTThreshold is set t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.23 |
| tmnxDot1agCfmMepFaultPropagation The value of tmnxDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service
containing the MEP. It also specifies if the … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.24 |
| tmnxDot1agCfmMepFacilityIfIndex The value of tmnxDot1agCfmMepFacilityIfIndex specifies, along with
tmnxDot1agCfmMepFacilityVlanId and tmnxDot1agCfmMepFacilityType, the
port or interface associated with this MEP.… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.25 |
| tmnxDot1agCfmMepFacilityVlanId The value of tmnxDot1agCfmMepFacilityVlanId specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityType, the
encapsulation value of the port or interfac… | column | - | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.26 |
| tmnxDot1agCfmMepFacilityType The value of tmnxDot1agCfmMepFacilityType specifies, along with
tmnxDot1agCfmMepFacilityIfIndex and tmnxDot1agCfmMepFacilityVlanId,
whether the port or interface is associated wit… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.27 |
| tmnxDot1agCfmMepFcltyFaultNotify The value of tmnxDot1agCfmMepFcltyFaultNotify specifies whether or not
a fault detected on this Facility MEP will notify the port or facility
tunnel associated to this MEP.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.28 |
| tmnxDot1agCfmMepDescription The value of tmnxDot1agCfmMepDescription specifies a user supplied
detailed description for this ETH-CFM MEP. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.29 |
| tmnxDot1agCfmMepMacAddress The value of tmnxDot1agCfmMepMacAddress specifies the MAC address that
is assigned to dot1agCfmMepMacAddress. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.3 |
| tmnxDot1agCfmMepMcLagInactive The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
value of tmnxDot1agCfmMcLagStdbyInact… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.30 |
| tmnxDot1agCfmMepCcmPaddingSize The value of tmnxDot1agCfmMepCcmPaddingSize specifies the number of
additional octets inserted into the CCM PDU for the Data TLV padding.
If tmnxDot1agCfmMepCcmPaddingSize is set … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.31 |
| tmnxDot1agCfmMepCcmIgnoreTLVs The value of tmnxDot1agCfmMepCcmIgnoreTLVs specifies the set of TLVs
that are received in a CCM PDU for the Remote MEP state machine of the
MEP that will be validated for format c… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.32 |
| tmnxDot1agCfmMepCsfEnable The value of tmnxDot1agCfmMepCsfEnable specifies whether received CSF
(Client Signal Fault) frames are processed by the Maintenance Entity
Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.33 |
| tmnxDot1agCfmMepCsfRxMultiplier The value of tmnxDot1agCfmMepCsfRxMultiplier specifies the receive
period multiplier used for timing out CSF, in increments of 5.
To calculate the timeout period of… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.34 |
| tmnxDot1agCfmMepCsfRxState The value of tmnxDot1agCfmMepCsfRxState indicates the state of the
received CSF frames for the MEP.
The values are:
los (0) - Client Loss of Signal
ais (1) - Client Forwar… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.35 |
| tmnxDot1agCfmMepCsfRxInterval The value of tmnxDot1agCfmMepCsfRxInterval indicates the CSF Interval
received in the most recent CSF frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.36 |
| tmnxDot1agCfmMepCsfRxCount The value of tmnxDot1agCfmMepCsfRxCount indicates the number of CSF
frames received on the MEP since the time CSF was enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.37 |
| tmnxDot1agCfmMepEthAisTxFail The value of tmnxDot1agCfmMepEthAisTxFail indicates the number of AIS
frames the MEP failed to transmit due to resource limitations. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.38 |
| tmnxDot1agCfmMepTxLbmTimeout The value of tmnxDot1agCfmMepTxLbmTimeout specifies the duration, in
seconds, before a loopback PDU sent by the node is considered to be
timed out. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.39 |
| tmnxDot1agCfmMepAisEnable The value of tmnxDot1agCfmMepAisEnable specifies whether AIS frames
are generated from the Maintenance Entity Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.4 |
| tmnxDot1agCfmMepTxLbmInterval The value of tmnxDot1agCfmMepTxLbmInterval specifies the duration,
in deciseconds, between loopback PDU transmissions. A value of zero
is only valid if there are 5 or fewer loopb… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.40 |
| tmnxDot1agCfmMepLbmPaddingSize The value of tmnxDot1agCfmMepLbmPaddingSize specifies the number of
additional octets inserted into the LBM PDU for the Data TLV padding.
If tmnxDot1agCfmMepLbmPaddingSize is set … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.41 |
| tmnxDot1agCfmMepIfSupportEnable The value of tmnxDot1agCfmMepIfSupportEnable specifies whether or not
the MEP will generate AIS PDUs when the endpoint associated to this
MEP is down regardless of CCM failures. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.42 |
| tmnxDot1agCfmMepAisLowPrioDef The value of tmnxDot1agCfmMepAisLowPrioDef specifies the lowest
priority defect that is allowed to generate an AIS frame.
When this object is 'allDef (1)', AIS fram… | column | IEEE8021-CFM-MIBDot1agCfmLowestAlarmPri | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.43 |
| tmnxDot1agCfmMepCollectLmmStats The value of tmnxDot1agCfmMepCollectLmmStats specifies whether or not
to compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and
TxFCl service frame counters for the speci… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.44 |
| tmnxDot1agCfmMepCreationOrigin The value of tmnxDot1agCfmMepCreationOrigin indicates the mechanism
which created this entry. | column | TIMETRA-TC-MIBTmnxCreateOrigin | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.45 |
| tmnxDot1agCfmMepEthTestTargMepId The value of tmnxDot1agCfmMepEthTestTargMepId specifies the
Maintenance association End Point Identifier (MepId) of another MEP in
the same Maintenance Association that the Eth-Te… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.46 |
| tmnxDot1agCfmMepEthTestLstDstMac The value of tmnxDot1agCfmMepEthTestLstDstMac indicates the
destination MAC address used in the most recent Eth-Test. If there
is no information about a previous test run, or if … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.47 |
| tmnxDot1agCfmMepOWDTTargetMepId The value of tmnxDot1agCfmMepOWDTTargetMepId specifies the Maintenance
association End Point Identifier (MepId) of another MEP in the same
Maintenance Association that the One-Way… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.48 |
| tmnxDot1agCfmMepOWDTLstDstMac The value of tmnxDot1agCfmMepOWDTLstDstMac indicates the
destination MAC addressed used in the most recent One-Way-Delay Test.
If there is no information about a previous test run… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.49 |
| tmnxDot1agCfmMepTWDTTargetMepId The value of tmnxDot1agCfmMepTWDTTargetMepId specifies the Maintenance
association End Point Identifier (MepId) of another MEP in the same
Maintenance Association that the Two-Way… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.50 |
| tmnxDot1agCfmMepTWDTLstDstMac The value of tmnxDot1agCfmMepTWDTLstDstMac indicates the
destination MAC addressed used in the most recent Two-Way-Delay Test.
If there is no information about a previous test run… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.51 |
| tmnxDot1agCfmMepCollLmmFcSts The value of tmnxDot1agCfmMepCollLmmFcSts specifies which forwarding
class levels (in and out of profile combined) have enabled the
computation for Y.1731 Ethernet Loss Measuremen… | column | TIMETRA-TC-MIBTFCSet | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.52 |
| tmnxDot1agCfmMepCollLmmFcStsInP The value of tmnxDot1agCfmMepCollLmmFcStsInP specifies which
forwarding class levels (in profile only) have enabled the computation
for Y.1731 Ethernet Loss Measurement (ETH-LM) R… | column | TIMETRA-TC-MIBTFCSet | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.53 |
| tmnxDot1agCfmMepTxEthVsmGrace The value of tmnxDot1agCfmMepTxEthVsmGrace specifies whether or not
Vendor Specific Message (VSM) grace period notifications will be sent
to the ETH-CFM remote MEP peers of this l… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.54 |
| tmnxDot1agCfmMepRxEthVsmGrace The value of tmnxDot1agCfmMepRxEthVsmGrace specifies whether or not
VSM grace period notifications that are received on the local MEP
will be processed. The value 'true (1)' enab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.55 |
| tmnxDot1agCfmMepTxEthEd The value of tmnxDot1agCfmMepTxEthEd specifies whether or not Ethernet
Expect Defect (ETH-ED) PDUs will be sent to the ETH-CFM remote MEP
peers of this local MEP. The value 'true … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.56 |
| tmnxDot1agCfmMepRxEthEd The value of tmnxDot1agCfmMepRxEthEd specifies whether or not ETH-ED
PDUs that are received on the local MEP will be processed. The value
'true (1)' enables ETH-ED PDU processing,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.57 |
| tmnxDot1agCfmMepEthEdMaxDurRx The value of tmnxDot1agCfmMepEthEdMaxDurRx specifies the maximum
Expected Duration value, in seconds, that will be used to track a peer
MEP outage. This value limits the size of t… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.58 |
| tmnxDot1agCfmMepEthEdPriority The value of tmnxDot1agCfmMepEthEdPriority specifies the priority
value for ETH-ED PDUs transmitted by the MEP.
If this object has the value '-1', the priority of t… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.59 |
| tmnxDot1agCfmMepAisPriority The value of tmnxDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.6 |
| tmnxDot1agCfmMepLbmSvcActResp The value of tmnxDot1agCfmMepLbmSvcActResp specifies whether or not
the MEP is capable of processing service activation streams
encapsulated in the ETH-CFM request Loopback Messag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.60 |
| tmnxDot1agCfmMepEthBnReceive The value of tmnxDot1agCfmMepEthBnReceive specifies whether or not the
reception and processing of Eth-BN (Ethernet Bandwidth Notification)
PDUs is enabled.
The val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.61 |
| tmnxDot1agCfmMepEthBnRxUpdPacing The value of tmnxDot1agCfmMepEthBnRxUpdPacing specifies the pacing of
the messages from the Eth-CFM subsystem to the QoS subsystem. The
updates will be held by the Eth-CFM subsyst… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.62 |
| tmnxDot1agCfmMepInstallMep The value of tmnxDot1agCfmMepInstallMep specifies whether or not the
MEP is installed in the forwarding plane and runs any of the Eth-CFM
State Machines.
When the v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.63 |
| tmnxDot1agCfmMepAisInterval The value of tmnxDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.7 |
| tmnxDot1agCfmMepEthRxAisInterval The value of tmnxDot1agCfmMepEthRxAisInterval indicates the AIS
Interval received in the last AIS Frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.8 |
| tmnxDot1agCfmMepEthRxAis The value of tmnxDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.9 |