tmnxDiamApNqAvpNasPortBitspec

The value of tmnxDiamApNqAvpNasPortBitspec specifies what number will
be put in the DIAMETER NAS-Port attribute if included in DIAMETER
NASREQ messages.
              
This field is only applicable if the 'nasPort' bit is set in
tmnxDiamApNqAvp.
              
<origin>               ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c'
              
'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' -
MDA number 'o' - outer VLAN ID 'p' - port number 's' - slot number 'v'
- ATM VPI (Virtual Path Identifier)
              
Maximum 32 bits can be specified.
              
If less than 32 bits are specified, the least significant bits are
used and the omitted higher bits are set to zero.
              
Example:  *12o*12i*2s01 means 'the 12 least significant bits of the
outer VLAN ID, followed by the 12 least significant bits of the inner
VLAN ID, followed by the two least significant bits of the slot number,
followed by a zero and a one-bit', stored in network order in the least
significant bits: 0000ooooooooooooiiiiiiiiiiiiss01.

MIB

TIMETRA-DIAMETER-MIB

OID

.1.3.6.1.4.1.6527.3.1.2.58.3.8.1.4

Type

column

Access

readwrite

Status

current

Parent

tmnxDiamApNqEntry

Table

tmnxDiamApNqTable

Siblings

14