infeedStatus
Sentry3-MIB ·
.1.3.6.1.4.1.1718.3.2.2.1.5
Object
column
Enumeration
The status of the input feed line. If the infeedCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the input feed. If the infeedCapabilities 'onSense' bit is FALSE, then only the 'on' and 'noComm' states are supported, and 'on' indicates a derived state, not a sensed state.
Context
- MIB
- Sentry3-MIB
- OID
.1.3.6.1.4.1.1718.3.2.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- infeedEntry
- Table
- infeedTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
2 | offWait |
3 | onWait |
4 | offError |
5 | onError |
6 | noComm |
7 | reading |
8 | offFuse |
9 | onFuse |
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| infeedIndex Index for the input feed table. | column | Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.1 |
| infeedCapacity The load capacity of the input feed line. A non-negative
value indicates the maximum load in Amps. A negative
value indicates that the capacity was not available. | column | Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.10 |
| infeedVoltage The line-to-line voltage of the input feed. A non-negative
value indicates the voltage in tenths of Volts. A negative
value indicates that the voltage was not available. | column | tenth Volts Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.11 |
| infeedPower The active power consumption of the input feed phase. A non-
negative value indicates the active power consumption in
Watts. A negative value indicates that the active power
con… | column | Watts Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.12 |
| infeedApparentPower The apparent power consumption of the input feed phase. A
non-negative value indicates the apparent power consumption
in Volt-Amps. A negative value indicates that the apparent
… | column | Volt-Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.13 |
| infeedPowerFactor The power factor of the input feed phase. A non-negative
value indicates the power factor in hundredths. A negative
value indicates that the power factor was not able to be
meas… | column | hundredths Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.14 |
| infeedCrestFactor The crest factor for the load of the input feed phase. A
non-negative value indicates the crest factor in tenths. A
negative value indicates that the crest factor was not able
t… | column | tenths Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.15 |
| infeedEnergy The energy consumption of the input feed phase. A non-
negative value indicates the energy consumption in tenths of
Kilowatt-Hours. A negative value indicates that the energy
co… | column | tenth Kilowatt-Hours Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.16 |
| infeedReactance The characterization of the phase relation between the
voltage and current of the input feed phase. | column | Enumeration | .1.3.6.1.4.1.1718.3.2.2.1.17 |
| infeedPhaseVoltage The voltage measured for the input feed phase. A non-
negative value indicates the voltage in tenths of Volts. A
negative value indicates that the voltage was not available. | column | tenth Volts Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.18 |
| infeedPhaseCurrent The current measured for the input feed phase. A non-
negative value indicates the measured load in hundredths of
Amps. A negative value indicates that a load value was not
able… | column | hundredth Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.19 |
| infeedID The ID of the input feed. | column | OctetString | .1.3.6.1.4.1.1718.3.2.2.1.2 |
| infeedCapacityUsed The used percentage of the input feed line load capacity
(infeedLoadValue / infeedCapacity x 100). A non-negative
value indicates the percentage of capacity used in tenths.
A neg… | column | tenth percentage Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.20 |
| infeedLineID The ID of the input feed line. | column | OctetString | .1.3.6.1.4.1.1718.3.2.2.1.21 |
| infeedLineToLineID The line-to-line ID of the input feed. | column | OctetString | .1.3.6.1.4.1.1718.3.2.2.1.22 |
| infeedPhaseID The ID of the input feed phase. | column | OctetString | .1.3.6.1.4.1.1718.3.2.2.1.23 |
| infeedVACapacity The apparent power capacity of the input feed circuit. A
non-negative value indicates the maximum apparent power in
Volt-Amps. A negative value indicates that the apparent
power… | column | Volt-Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.24 |
| infeedVACapacityUsed The used percentage of the input feed circuit apparent power
capacity (infeedApparentPower / infeedVACapacity x 100). A
non-negative value indicates the percentage of capacity us… | column | tenth percentage Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.25 |
| infeedName The name of the input feed. | column | OctetString | .1.3.6.1.4.1.1718.3.2.2.1.3 |
| infeedCapabilities The capabilities of the input feed. | column | Bits | .1.3.6.1.4.1.1718.3.2.2.1.4 |
| infeedLoadStatus The status of the load measured on the input feed line. If
the infeedCapabilities 'loadSense' bit is TRUE, then all of
the states are supported. If the infeedCapabilities
'loadS… | column | Enumeration | .1.3.6.1.4.1.1718.3.2.2.1.6 |
| infeedLoadValue The load measured on the input feed line. A non-negative
value indicates the measured load in hundredths of Amps. A
negative value indicates that a load value was not able to
be… | column | hundredth Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.7 |
| infeedLoadHighThresh The load high threshold value of the input feed line in Amps. | column | Amps Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.8 |
| infeedOutletCount The number of controlled and/or monitored outlets on the
input feed. | column | Integer32 | .1.3.6.1.4.1.1718.3.2.2.1.9 |