dot1qFutureVlanPortSubnetMapExtTable

SUPERMICRO-VLAN-MIB · .1.3.6.1.4.1.10876.101.1.65.1.30

Object

table

Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.

Context

MIB: SUPERMICRO-VLAN-MIB
OID: .1.3.6.1.4.1.10876.101.1.65.1.30
Type: table
Status: current
Parent: dot1qFutureVlan
Siblings: 29
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dot1qFutureVlanStatus The administrative status requested by management for the Vlan feature. The value enabled(1) indicates that Vlan should be enabled in the device on all ports. The value disable…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.1`
dot1qFutureVlanPortTable Table containing the port type information.	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.10`
dot1qFutureVlanPortMacMapTable A table that contains information on Vlan-MAC address mapping. BCM supports Mac based VLAN globally (not on per port).	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.11`
dot1qFutureVlanFidMapTable This table contains information about the Filtering database identifier (FID) used by vlan's to make forwarding decisions. Vlan's can be mapped to use the same FID to share filte…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.12`
dot1qFutureVlanOperStatus The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates that Vlan module…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.13`
dot1qFutureGvrpOperStatus The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates that GVRP module…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.14`
dot1qFutureGmrpOperStatus The operational status of the GMRP module. The value enabled(1) indicates that GMRP module is currently enabled in the device. The value disabled(2) indicates that GMRP module…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.15`
dot1qFutureVlanCounterTable The table contains the statistics on a per VLAN basis. It contains number of unicast, broadcast and unknown unicast packets flooded per VLAN.	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.16`
dot1qFutureVlanUnicastMacControlTable A table containing per VLAN Unicast MAC address control information. The control information includes the status of unicast MAC address learning as well as restricting the numbe…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.17`
dot1qFutureGarpDebug Enables the tracing in the selected submodule in GARP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initiali…	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.65.1.18`
dot1qFutureVlanTpFdbTable An extention to the dot1qTpFdbTable contains information about unicast entries only learned via pseudowire for which the device has forwarding and/or filtering information. This i…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.19`
dot1qFutureVlanMacBasedOnAllPorts This object is only used to enable/disable the mac based type on all ports of dot1qFutureVlanPortMacBasedClassification	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.2`
dot1qFutureVlanWildCardTable Wild card vlan (Id : 0xFFF) static filtering information will be used for all Vlans for which there is no specific Static filtering exists in dot1qStaticUnicastTable or dot1qSt…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.20`
dot1qFutureStaticUnicastExtnTable A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of p…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.21`
dot1qFutureUnicastMacLearningLimit The Limiting value on the number of distinct unicast MAC addresses that can be learnt in the device. The upper limit value that can be SET for this object is determined…	scalar	Unsigned32	`.1.3.6.1.4.1.10876.101.1.65.1.22`
dot1qFutureVlanBaseBridgeMode This object indicates Base Bridge-Mode of the Switch. Setting the value to transparent mode will make switch behave according to IEEE 802.1d implementation. Setting the value to V…	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.65.1.23`
dot1qFutureVlanSubnetBasedOnAllPorts This object is used to enable/disable the subnet based VLAN Classification on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting this object to enable/disable s…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.24`
dot1qFutureVlanPortSubnetMapTable Subnet based VLAN classification - The source IP-subnet address in the incoming packets is used to classify VLAN membership. Subnet based VLAN is applied only on IP packets. This…	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.25`
dot1qFutureVlanGlobalMacLearningStatus This object specifies the global MAC learning status of the switch. The default value of global MAC learning status of the switch is enabled. This object can take only two values…	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.26`
dot1qFutureVlanApplyEnhancedFilteringCriteria If this object is set as 'false', then only default filtering utility criteria will be applied on all ports. Otherwise the filtering criteria to be used for the ports will be tak…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.65.1.27`
dot1qFutureVlanSwStatsEnabled If set to 'true', statistics collection will be done and stored in software. This object can be set to 'true' only if the data switching is done by software. If set to 'false', t…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.65.1.28`
dot1qFutureStVlanExtTable An extension to dot1qVlanStaticTable VLAN table. This table contains the Private Vlan (PVLAN) related configurations.	table	-	`.1.3.6.1.4.1.10876.101.1.65.1.29`
dot1qFutureVlanPortProtoBasedOnAllPorts This object is only used to enable/disable the port protocol based type on all ports of dot1qFutureVlanPortPortProtoBasedClassification	scalar	EnabledStatus	`.1.3.6.1.4.1.10876.101.1.65.1.3`
dot1qFutureVlanGlobalsFdbFlush If this object is set as 'true', then all the dynamically learnt MAC addresses will be removed. After flush, this object is set to 'false'	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.65.1.31`
dot1qFutureVlanShutdownStatus The administrative shutdown status requested by management for Vlan The value true(1) indicates that Vlan should be shutdown in the device on all ports. All memory will be rel…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.65.1.5`
dot1qFutureGarpShutdownStatus The administrative status requested by management for GARP The value true(1) indicates that GARP should be shutdown in the device on all ports. All memory will be released. T…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.65.1.6`
dot1qFutureVlanDebug Enables the tracing in the selected submodule in VLAN. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initiali…	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.65.1.7`
dot1qFutureVlanLearningMode The Type of VLAN learning mode. When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unicast configurations …	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.65.1.8`
dot1qFutureVlanHybridTypeDefault The default learning mode of the switch if dot1qFutureVlanLearningMode is hvl (3). When the object value is modified, the static fid-vlan mappings and static unicast entries need…	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.65.1.9`

Child Objects