SUPERMICRO-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
13
Rows
13
Columns
48
.1.3.6.1.4.1.10876.101.1.65.1.10 · 1 row entry · 7 columns
Table containing the port type information.
dot1qFutureVlanPortEntry entry .1.3.6.1.4.1.10876.101.1.65.1.10.1
Entry indicating the type of the port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanPort
The port number of the port for which this entry applies.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.65.1.10.1.1
dot1qFutureVlanPortType
The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing Vlans an…
Enumerationr/w
Enumerated Values:
1accessPort
2trunkPort
3hybridPort
4hostPort
5promiscuousPort
.1.3.6.1.4.1.10876.101.1.65.1.10.1.2
dot1qFutureVlanPortPortProtoBasedClassification
Object to expilicitly enable/disable the port and protocol
Classification on port. This can be independently set without
any dependency in available configuration of
dot1qFutureVlanPortProtoBasedOnAllPorts
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.1.10.1.4
dot1qFutureVlanFilteringUtilityCriteria
Based on this object, learning on a port is decided.

If default filtering utility Criteria is selected on a port, then
learning of source mac from a received packet on that port will be
done only if there…
Enumerationr/w
Enumerated Values:
1default
2enhanced
.1.3.6.1.4.1.10876.101.1.65.1.10.1.5
dot1qFutureVlanPortProtected
The Split Horizon property of the port. If set to true, frames that
are received on any other port that has the same property set to true,
will not be forwarded on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.65.1.10.1.6
dot1qFutureVlanPortUnicastMacLearning
A Truth value indicating the unicast MAC learning enabled/disabled
status for this port.
When Unicast Mac Learning is disabled, no unicast mac entry will be
learnt on this port.
When Mac Learning is enabled, unicast m…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.1.10.1.8
dot1qFutureVlanPortAllowedVlanList
A string of octets containing one bit per vlan.
Specifies the vlans which the trunk port can add to.
By default all vlans are allowed to add the trunk ports.

If a set of vlans are configured in the 'VlanL…
OctetStringr/w
Constraints:
range: 0-512
.1.3.6.1.4.1.10876.101.1.65.1.10.1.9
.1.3.6.1.4.1.10876.101.1.65.1.11 · 1 row entry · 3 columns
A table that contains information on Vlan-MAC address 
mapping. 
BCM supports Mac based VLAN globally (not on per port).
dot1qFutureVlanPortMacMapEntry entry .1.3.6.1.4.1.10876.101.1.65.1.11.1
Entry that contains Vlan-MAC address mapping.
Indexes
dot1qFutureVlanPortMacMapAddr
Column Syntax OID
dot1qFutureVlanPortMacMapAddr
The Mac address for which the Vlan mapping is present in the entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.10876.101.1.65.1.11.1.1
dot1qFutureVlanPortMacMapVid
The Vlan to which the mac address of this entry is mapped to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.10876.101.1.65.1.11.1.2
dot1qFutureVlanPortMacMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.65.1.11.1.5
.1.3.6.1.4.1.10876.101.1.65.1.12 · 1 row entry · 2 columns
This table contains information about the Filtering database identifier
(FID) used by vlan's to make forwarding decisions. Vlan's can be mapped 
to use the same FID to share filtering information among them. This will
cause the mapped vlan's to operate in shared vlan learning (SVL) mode.
Vlan's mapped to a unique FID will operate in independent vlan learning
mode (IVL). A SET operation on this table is allowed only when 
dot1qFutureVlanLearningMode is hybrid. By default all vlan's will be 
mapped to the FID equal to their vlan id when 
dot1qFutureVlanHybridTypeDefault is IVL. If the value of 
dot1qFutureVlanHybridTypeDefault is SVL all vlan's are mapped to 
filtering database id 1.
dot1qFutureVlanFidMapEntry entry .1.3.6.1.4.1.10876.101.1.65.1.12.1
Entry mapping VlanId to Filtering database id.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanIndex
VLAN ID for which filtering database information is available.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.10876.101.1.65.1.12.1.1
dot1qFutureVlanFid
The Filtering database id (FID) that will be used by the vlan.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.10876.101.1.65.1.12.1.2
.1.3.6.1.4.1.10876.101.1.65.1.16 · 1 row entry · 6 columns
The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.
dot1qFutureVlanCounterEntry entry .1.3.6.1.4.1.10876.101.1.65.1.16.1
The entry contains the VLAN statistics
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanCounterRxUcast
Number of unicast packets received in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.16.1.1
dot1qFutureVlanCounterRxMcastBcast
Number of multicast/broadcast packets received in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.16.1.2
dot1qFutureVlanCounterTxUnknUcast
Number of unknown unicast packets flooded in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.16.1.3
dot1qFutureVlanCounterTxUcast
Number of known unicast packets forwarded in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.16.1.4
dot1qFutureVlanCounterTxBcast
Number of broadcast packets forwarded in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.16.1.5
dot1qFutureVlanCounterStatus
A Truth value indicating the statistics collection is enabled/disabled
for this vlan.

When statistics collection is set to disabled, Vlan stops collecting
statistics on this specific vlan.
When statistics…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.1.16.1.6
.1.3.6.1.4.1.10876.101.1.65.1.17 · 1 row entry · 4 columns
A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN.
dot1qFutureVlanUnicastMacControlEntry entry .1.3.6.1.4.1.10876.101.1.65.1.17.1
Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanUnicastMacLimit
The Limiting value on the number of distinct unicast MAC addresses
learnt in a VLAN. The lower limit and upper limit value that
can be SET for this object is determined by the underlying hardware.
Value 0 means unlimit…
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.10876.101.1.65.1.17.1.1
dot1qFutureVlanAdminMacLearningStatus
A Truth value used to configure the unicast MAC learning Admin status
the VLAN to either be enabled (1) or disabled (2) or default (3).
Configuring this object to default behaviour is governed by value
configured for …
MacLearningStatusr/w
Textual Convention: MacLearningStatus Enumeration
Type Values:
1enabled
2disabled
3default
.1.3.6.1.4.1.10876.101.1.65.1.17.1.2
dot1qFutureVlanOperMacLearningStatus
A Truth value indicating the unicast MAC learning enabled/disabled
Operational status for the specified VLAN.
If the VLAN does not have any member port, then the Mac Learning
Status for this VLAN will always be disabled…
EnabledStatus
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.1.17.1.3
dot1qFutureVlanPortFdbFlush
If this object is set as 'true', then all the dynamically
learnt MAC addresses in specified Vlan will be removed. After flush
this object is set to 'false'
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.65.1.17.1.4
.1.3.6.1.4.1.10876.101.1.65.1.19 · 1 row entry · 3 columns
An extention to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame.
dot1qFutureVlanTpFdbEntry entry .1.3.6.1.4.1.10876.101.1.65.1.19.1
Information about the pseudowire on which MAC address was
learned
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureVlanTpFdbPw
Either the value '0', or the pseudowire number on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the entry was
le…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.1.19.1.1
dot1qTpOldFdbPort
This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
Zero(0), so that ISS walk doesn't break. It indicates the port
through which the mac-addr…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.65.1.19.1.2
dot1qFutureConnectionIdentifier
This object is to associate the backbone MAC address of the peer
backbone edge brige with customer Mac addresses that can be reached
through the peer backbone edge bridge.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.10876.101.1.65.1.19.1.3
.1.3.6.1.4.1.10876.101.1.65.1.20 · 1 row entry · 3 columns
Wild card vlan (Id : 0xFFF) static filtering information 
will be used for all Vlans for which there is no specific 
Static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.
dot1qFutureVlanWildCardEntry entry .1.3.6.1.4.1.10876.101.1.65.1.20.1
WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing this wild card mac
address as destination address and f…
Indexes
dot1qFutureVlanWildCardMacAddress
Column Syntax OID
dot1qFutureVlanWildCardMacAddress
The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.10876.101.1.65.1.20.1.1
dot1qFutureVlanWildCardEgressPorts
The set of ports to which frames received from a specific port
and destined for dot1qFutureVlanWildCardMacAddress address must
be forwarded, if there is no specific static filtering entry
exist for this MAC.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
.1.3.6.1.4.1.10876.101.1.65.1.20.1.2
dot1qFutureVlanWildCardRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.65.1.20.1.3
.1.3.6.1.4.1.10876.101.1.65.1.21 · 1 row entry · 1 columns
A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only.
dot1qFutureStaticUnicastExtnEntry entry .1.3.6.1.4.1.10876.101.1.65.1.21.1
Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureStaticConnectionIdentifier
This object is to associate the backbone MAC address of the peer
backbone edge bridge with customer Mac addresses that can be reached
through the peer backbone edge bridge.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.10876.101.1.65.1.21.1.1
.1.3.6.1.4.1.10876.101.1.65.1.25 · 1 row entry · 3 columns
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP packets.
This table contains information on Subnet-VlanId address mapping.
dot1qFutureVlanPortSubnetMapEntry entry .1.3.6.1.4.1.10876.101.1.65.1.25.1
Entry that contains Vlan-Subnet address mapping.
Indexes
dot1qFutureVlanPortSubnetMapAddr
Column Syntax OID
dot1qFutureVlanPortSubnetMapAddr
The Source IP-Subnet address for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.65.1.25.1.1
dot1qFutureVlanPortSubnetMapVid
The Vlan to which the Source IP-Subnet address of this entry is mapped to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.10876.101.1.65.1.25.1.2
dot1qFutureVlanPortSubnetMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.65.1.25.1.4
.1.3.6.1.4.1.10876.101.1.65.1.29 · 1 row entry · 2 columns
An extension to dot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.
dot1qFutureStVlanExtEntry entry .1.3.6.1.4.1.10876.101.1.65.1.29.1
Each entry specifies the Private Vlan configuration done for
a given Vlan.
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureStVlanPVlanType
This object identifies the Private vlan type for this vlan.
normal - Vlan does not belong to any Private VLAN domain.
primary - Primary vlan in a Private VLAN domain.
isolated - Isolated vlan in a Private VLAN dom…
Enumerationr/w
Enumerated Values:
1normal
2primary
3isolated
4community
.1.3.6.1.4.1.10876.101.1.65.1.29.1.1
dot1qFutureStVlanPrimaryVid
This object identifies the primary vlan assoicated with this
vlan.
For primary and normal vlans, this object will have the value zero
and configuring this object to non-zero value will not be allowed for
them.
For se…
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.10876.101.1.65.1.29.1.2
.1.3.6.1.4.1.10876.101.1.65.1.30 · 1 row entry · 4 columns
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
dot1qFutureVlanPortSubnetMapExtEntry entry .1.3.6.1.4.1.10876.101.1.65.1.30.1
Entry that contains Vlan-Subnet address mapping.
Indexes
dot1qFutureVlanPortSubnetMapExtAddr dot1qFutureVlanPortSubnetMapExtMask
Column Syntax OID
dot1qFutureVlanPortSubnetMapExtAddr
The Source IP address for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.65.1.30.1.1
dot1qFutureVlanPortSubnetMapExtMask
The Subnet Mask for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.65.1.30.1.2
dot1qFutureVlanPortSubnetMapExtVid
The Vlan to which the Source IP-Subnet address of this entry is mapped
to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.10876.101.1.65.1.30.1.3
dot1qFutureVlanPortSubnetMapExtRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.65.1.30.1.5
.1.3.6.1.4.1.10876.101.1.65.2.3 · 1 row entry · 1 columns
This table contains information about the dot1q tunnel ports. A walk on 
this table will show only those interfaces that are configured for
tunneling.
This table is supported only when the Bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel configuration objects 
are defined in fspb.mib
dot1qFutureVlanTunnelEntry entry .1.3.6.1.4.1.10876.101.1.65.2.3.1
Entry indicating the tunnel information of the port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanTunnelStatus deprecated
Indicates whether dot1qTunnelling is enabled on disabled on this port.
dot1qFutureVlanTunnelStatus can be set to `enabled` if and only if
the Bridge mode is set to be `Provider Bridge Mode` and VLAN port
type is set to …
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.2.3.1.1
.1.3.6.1.4.1.10876.101.1.65.2.4 · 1 row entry · 9 columns
This table contains information/statistics about the customer STP/GVRP BPDU's and
IGMP packets being tunneled inside the service provider network. A walk on this
table will show only those interfaces in which tunneling is enabled.
          
This table is supported only when the Bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib.
dot1qFutureVlanTunnelProtocolEntry entry .1.3.6.1.4.1.10876.101.1.65.2.4.1
Entry indicating the tunneling of STP/GVRP BPDU's and IGMP Packets on this port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanTunnelStpPDUs deprecated
Indicates whether tunneling of STP BPDUs is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.2.4.1.1
dot1qFutureVlanTunnelStpPDUsRecvd deprecated
The number of tunneled ingress STP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.2
dot1qFutureVlanTunnelStpPDUsSent deprecated
The number of tunneled egress STP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.3
dot1qFutureVlanTunnelGvrpPDUs deprecated
Indicates whether tunneling of GVRP BPDUs is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.2.4.1.4
dot1qFutureVlanTunnelGvrpPDUsRecvd deprecated
The number of tunneled ingress GVRP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.5
dot1qFutureVlanTunnelGvrpPDUsSent deprecated
The number of tunneled egress GVRP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.6
dot1qFutureVlanTunnelIgmpPkts deprecated
Indicates whether tunneling of IGMP Packets is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.10876.101.1.65.2.4.1.7
dot1qFutureVlanTunnelIgmpPktsRecvd deprecated
The number of tunneled ingress IGMP Packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.8
dot1qFutureVlanTunnelIgmpPktsSent deprecated
The number of tunneled egress IGMP Packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.65.2.4.1.9