dot1qFutureVlanBaseBridgeMode
SUPERMICRO-VLAN-MIB ·
.1.3.6.1.4.1.10876.101.1.65.1.23
Object
scalar
r/w
Enumeration
This object indicates Base Bridge-Mode of the Switch. Setting the value to transparent mode will make switch behave according to IEEE 802.1d implementation. Setting the value to VLAN mode will make switch behave according to IEEE 802.1q Implementation
Context
- MIB
- SUPERMICRO-VLAN-MIB
- OID
.1.3.6.1.4.1.10876.101.1.65.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- dot1qFutureVlan
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dot1dTransparentMode |
2 | dot1qVlanMode |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1qFutureVlanStatus The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disable… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.1 |
| dot1qFutureVlanPortTable Table containing the port type information. | table | - | .1.3.6.1.4.1.10876.101.1.65.1.10 |
| dot1qFutureVlanPortMacMapTable A table that contains information on Vlan-MAC address
mapping.
BCM supports Mac based VLAN globally (not on per port). | table | - | .1.3.6.1.4.1.10876.101.1.65.1.11 |
| dot1qFutureVlanFidMapTable This table contains information about the Filtering database identifier
(FID) used by vlan's to make forwarding decisions. Vlan's can be mapped
to use the same FID to share filte… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.12 |
| dot1qFutureVlanOperStatus The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.13 |
| dot1qFutureGvrpOperStatus The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.14 |
| dot1qFutureGmrpOperStatus The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.15 |
| dot1qFutureVlanCounterTable The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN. | table | - | .1.3.6.1.4.1.10876.101.1.65.1.16 |
| dot1qFutureVlanUnicastMacControlTable A table containing per VLAN Unicast MAC address control information.
The control information includes the status of unicast MAC address
learning as well as restricting the numbe… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.17 |
| dot1qFutureGarpDebug Enables the tracing in the selected submodule in GARP. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initiali… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.65.1.18 |
| dot1qFutureVlanTpFdbTable An extention to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This i… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.19 |
| dot1qFutureVlanMacBasedOnAllPorts This object is only used to enable/disable the mac based type on all ports
of dot1qFutureVlanPortMacBasedClassification | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.2 |
| dot1qFutureVlanWildCardTable Wild card vlan (Id : 0xFFF) static filtering information
will be used for all Vlans for which there is no specific
Static filtering exists in dot1qStaticUnicastTable or
dot1qSt… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.20 |
| dot1qFutureStaticUnicastExtnTable A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of p… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.21 |
| dot1qFutureUnicastMacLearningLimit The Limiting value on the number of distinct unicast MAC addresses
that can be learnt in the device.
The upper limit value that can be SET for this object is determined… | scalar | Unsigned32 | .1.3.6.1.4.1.10876.101.1.65.1.22 |
| dot1qFutureVlanSubnetBasedOnAllPorts This object is used to enable/disable the subnet based VLAN Classification
on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting
this object to enable/disable s… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.24 |
| dot1qFutureVlanPortSubnetMapTable Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP packets.
This… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.25 |
| dot1qFutureVlanGlobalMacLearningStatus This object specifies the global MAC learning status of the
switch. The default value of global MAC learning status of
the switch is enabled.
This object can take only two values… | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.26 |
| dot1qFutureVlanApplyEnhancedFilteringCriteria If this object is set as 'false', then only default filtering
utility criteria will be applied on all ports.
Otherwise the filtering criteria to be used for the ports
will be tak… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.65.1.27 |
| dot1qFutureVlanSwStatsEnabled If set to 'true', statistics collection will be done and stored in
software. This object can be set to 'true' only if the data switching
is done by software.
If set to 'false', t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.65.1.28 |
| dot1qFutureStVlanExtTable An extension to dot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations. | table | - | .1.3.6.1.4.1.10876.101.1.65.1.29 |
| dot1qFutureVlanPortProtoBasedOnAllPorts This object is only used to enable/disable the port protocol based type on all ports
of dot1qFutureVlanPortPortProtoBasedClassification | scalar | EnabledStatus | .1.3.6.1.4.1.10876.101.1.65.1.3 |
| dot1qFutureVlanPortSubnetMapExtTable Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
… | table | - | .1.3.6.1.4.1.10876.101.1.65.1.30 |
| dot1qFutureVlanGlobalsFdbFlush If this object is set as 'true', then all the dynamically learnt
MAC addresses will be removed. After flush, this object
is set to 'false' | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.65.1.31 |
| dot1qFutureVlanShutdownStatus The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be rel… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.65.1.5 |
| dot1qFutureGarpShutdownStatus The administrative status requested by management for GARP
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memory will be released.
T… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.65.1.6 |
| dot1qFutureVlanDebug Enables the tracing in the selected submodule in VLAN. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initiali… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.65.1.7 |
| dot1qFutureVlanLearningMode The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.65.1.8 |
| dot1qFutureVlanHybridTypeDefault The default learning mode of the switch if
dot1qFutureVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.65.1.9 |