fsSnoopPortMaxLimit

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.5.1.1.6

Object

column r/w SNMPv2-SMIUnsigned32

Configures the maximum number of unique entries (channel or 
group) that can be learned simultaneously on this interface. 
The fsSnoopPortMaxLimitType must be set before configuring 
this object. However the Max-limit is configurable even if the 
limit type is 'none', but the limit won't be in effect unless 
the limit type is set as 'channels' or 'groups'. 
              
If fsSnoopPortMaxLimitType is 'channels', 
this limit applies to number of channels that can be joined 
on this interface. If fsSnoopPortMaxLimitType is 'groups', 
this limit applies to number of groups that can be joined on 
this interface.
              
By default, this object will hold a value of zero and will 
not limit any IGMP packets as long as the value of 
fsSnoopPortMaxLimitType is set to 'none'. However, when
fsSnoopPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the 
maximum groups or channels registrations that the system can 
support.

Context

MIB: SUPERMICRO-SNOOP-MIB
OID: .1.3.6.1.4.1.10876.101.1.105.5.1.1.6
Type: column
Access: readwrite
Status: current
Parent: fsSnoopPortEntry
Table: fsSnoopPortTable
Siblings: 10

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsSnoopPortIndex The interface index of the port.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.1`
fsSnoopPortDropReports This object decides whether to process or drop the IGMP reports coming on this port.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.10`
fsSnoopPortRowStatus The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.11`
fsSnoopPortInetAddressType Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.2`
fsSnoopPortLeaveMode Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave messa…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.3`
fsSnoopPortRateLimit Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsi…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.4`
fsSnoopPortMaxLimitType Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as …	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.5`
fsSnoopPortProfileId The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.7`
fsSnoopPortMemberCnt Provides the total number of groups or channels active on the interface at the given time.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.8`
fsSnoopPortMaxBandwidthLimit Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopPortMaxLimitType must be set before configuring this object. If the fsSnoopPortMaxLimitType is 'channels…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.105.5.1.1.9`