fsSnoopPortLeaveMode

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.5.1.1.3
MIB view Table view

Object

column r/w Enumeration 
Sets the mechanism to be used for processing the leave messages
in the down stream interface. 
              
When this object is set to 'explicitHostTrack', then the leave 
messages are processed using the explicit host tracking 
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.  
              
This object can be configured only when
fsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave 
messages. For igmpv3 reports, the explicit host tracking 
functionality is always performed for tracking the source 
registrations and it cannot be disabled (i.e.) configuration 
using this object has no effect.

Context

MIB
SUPERMICRO-SNOOP-MIB
OID
.1.3.6.1.4.1.10876.101.1.105.5.1.1.3
Type
column
Access
readwrite
Status
current
Parent
fsSnoopPortEntry
Table
fsSnoopPortTable
Siblings
10

Syntax

Enumeration

Values & Constraints

Enumerated Values
1explicithosttrack
2fastleave
3normalleave

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsSnoopPortIndex
The interface index of the port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.105.5.1.1.1
fsSnoopPortDropReports
This object decides whether to process or drop the IGMP reports coming on this port.
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.1.1.10
fsSnoopPortRowStatus
The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.105.5.1.1.11
fsSnoopPortInetAddressType
Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.10876.101.1.105.5.1.1.2
fsSnoopPortRateLimit
Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.4
fsSnoopPortMaxLimitType
Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as …
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.1.1.5
fsSnoopPortMaxLimit
Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The fsSnoopPortMaxLimitType must be set before configuri…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.6
fsSnoopPortProfileId
The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.7
fsSnoopPortMemberCnt
Provides the total number of groups or channels active on the interface at the given time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.8
fsSnoopPortMaxBandwidthLimit
Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopPortMaxLimitType must be set before configuring this object. If the fsSnoopPortMaxLimitType is 'channels…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.9