fsSnoopPortMaxBandwidthLimit

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.5.1.1.9
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
Sets the Maximum bandwidth allowed on this port for Multicast.
The fsSnoopPortMaxLimitType must be set before configuring 
this object. If the fsSnoopPortMaxLimitType is 'channels', 
this limit applies to the bandwidth of channels going through 
the port. It means that both Source as well as Group will be 
considered for getting the configured bandwidth of multicast 
data. If the fsSnoopPortMaxLimitType is 'groups', only 
Group address will be considered for getting the configured 
bandwidth of multicast data. Whenever a join comes, the 
bandwidth corresponding to the joined channel or group, will be 
reserved on the port. No new joins will be accepted, if the 
reserved bandwidth gets greater that the configured 
MaxBandwidth.

Context

MIB
SUPERMICRO-SNOOP-MIB
OID
.1.3.6.1.4.1.10876.101.1.105.5.1.1.9
Type
column
Access
readwrite
Status
current
Parent
fsSnoopPortEntry
Table
fsSnoopPortTable
Siblings
10

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsSnoopPortIndex
The interface index of the port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.105.5.1.1.1
fsSnoopPortDropReports
This object decides whether to process or drop the IGMP reports coming on this port.
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.1.1.10
fsSnoopPortRowStatus
The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.105.5.1.1.11
fsSnoopPortInetAddressType
Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.10876.101.1.105.5.1.1.2
fsSnoopPortLeaveMode
Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave messa…
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.1.1.3
fsSnoopPortRateLimit
Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.4
fsSnoopPortMaxLimitType
Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as …
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.1.1.5
fsSnoopPortMaxLimit
Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The fsSnoopPortMaxLimitType must be set before configuri…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.6
fsSnoopPortProfileId
The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.7
fsSnoopPortMemberCnt
Provides the total number of groups or channels active on the interface at the given time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.1.1.8