fsSnoopEnhPortMaxLimitType
SUPERMICRO-SNOOP-MIB ·
.1.3.6.1.4.1.10876.101.1.105.5.2.1.6
Object
column
r/w
Enumeration
Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for groups.
The channel limit will be applied only for IGMPv3 Include &
Allow reports whereas the group limit will be applied for
all IGMP reports.
By default, this object has a value of 0 ('none') and no
limiting is done i.e. the value of fsSnoopEnhPortMaxLimit
is ignored when this object is set to 'none'.
Context
- MIB
- SUPERMICRO-SNOOP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.105.5.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopEnhPortEntry
- Table
- fsSnoopEnhPortTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | groups |
2 | channels |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopEnhPortIndex The interface index of the port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.1.105.5.2.1.1 |
| fsSnoopEnhPortMaxBandwidthLimit Sets the Maximum bandwidth allowed on this port for Multicast.
The fsSnoopEnhPortMaxLimitType must be set before configuring
this object. If the fsSnoopEnhPortMaxLimitType is 'ch… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.5.2.1.10 |
| fsSnoopEnhPortDropReports This object decides whether to process or drop the
IGMP reports coming on this port. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.5.2.1.11 |
| fsSnoopEnhPortRowStatus The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.105.5.2.1.12 |
| fsSnoopEnhPortInnerVlanId The Inner VLAN Identifier. | column | InnerVlanIndex | .1.3.6.1.4.1.10876.101.1.105.5.2.1.2 |
| fsSnoopEnhPortInetAddressType Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.10876.101.1.105.5.2.1.3 |
| fsSnoopEnhPortLeaveMode Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messa… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.5.2.1.4 |
| fsSnoopEnhPortRateLimit Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.5.2.1.5 |
| fsSnoopEnhPortMaxLimit Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The fsSnoopEnhPortMaxLimitType must be set before config… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.5.2.1.7 |
| fsSnoopEnhPortProfileId The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.5.2.1.8 |
| fsSnoopEnhPortMemberCnt Provides the total number of groups or channels active on the
interface at the given time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.5.2.1.9 |