fsSnoopEnhPortLeaveMode

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.5.2.1.4
MIB view Table view

Object

column r/w Enumeration 
Sets the mechanism to be used for processing the leave messages
in the down stream interface. 
              
When this object is set to 'explicitHostTrack', then the leave 
messages are processed using the explicit host tracking 
mechanism.
When this object is set to 'fastLeave', the leave messages
are processed by the fast leave mechanism.
When this object is set to 'normalLeave', for every
leave message received, a group or group specific query is sent
on the interface.  
              
This object can be configured only when
fsSnoopInstanceGlobalLeaveConfigLevel is set to portbased.
This object is applicable only for processing the igmp v2 leave 
messages. For igmpv3 reports, the explicit host tracking 
functionality is always performed for tracking the source 
registrations and it cannot be disabled.
For the v3 INCLUDE NONE reports the leave handling behavior is
similar to the v2 leave messages for the leave modes
'explicitHostTrack' and 'fastLeave'. For the leave mode
'normalLeave' query message is not sent on the interface
and only the host registered for the multicast group is removed

Context

MIB
SUPERMICRO-SNOOP-MIB
OID
.1.3.6.1.4.1.10876.101.1.105.5.2.1.4
Type
column
Access
readwrite
Status
current
Parent
fsSnoopEnhPortEntry
Table
fsSnoopEnhPortTable
Siblings
11

Syntax

Enumeration

Values & Constraints

Enumerated Values
1explicithosttrack
2fastleave
3normalleave

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsSnoopEnhPortIndex
The interface index of the port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.105.5.2.1.1
fsSnoopEnhPortMaxBandwidthLimit
Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopEnhPortMaxLimitType must be set before configuring this object. If the fsSnoopEnhPortMaxLimitType is 'ch…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.10
fsSnoopEnhPortDropReports
This object decides whether to process or drop the IGMP reports coming on this port.
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.2.1.11
fsSnoopEnhPortRowStatus
The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.105.5.2.1.12
fsSnoopEnhPortInnerVlanId
The Inner VLAN Identifier.
columnInnerVlanIndex.1.3.6.1.4.1.10876.101.1.105.5.2.1.2
fsSnoopEnhPortInetAddressType
Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.10876.101.1.105.5.2.1.3
fsSnoopEnhPortRateLimit
Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.5
fsSnoopEnhPortMaxLimitType
Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as …
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.2.1.6
fsSnoopEnhPortMaxLimit
Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The fsSnoopEnhPortMaxLimitType must be set before config…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.7
fsSnoopEnhPortProfileId
The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.8
fsSnoopEnhPortMemberCnt
Provides the total number of groups or channels active on the interface at the given time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.9