fsSnoopEnhPortMaxLimit

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.5.2.1.7
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
Configures the maximum number of unique entries (channel or 
group) that can be learned simultaneously on this interface. 
The fsSnoopEnhPortMaxLimitType must be set before configuring 
this object. However the Max-limit is configurable even if the 
limit type is 'none', but the limit won't be in effect unless 
the limit type is set as 'channels' or 'groups'. 
              
If fsSnoopEnhPortMaxLimitType is 'channels', 
this limit applies to number of channels that can be joined 
on this interface. If fsSnoopEnhPortMaxLimitType is 'groups', 
this limit applies to number of groups that can be joined on 
this interface.
              
By default, this object will hold a value of zero and will 
not limit any IGMP packets as long as the value of 
fsSnoopEnhPortMaxLimitType is set to 'none'. However, when
fsSnoopEnhPortMaxLimitType is set to 'groups' or 'channels',
if this object has the value of zero, then no IGMP reports will
be processed on this interface.
The maximum value supported by this object is dependent on the 
maximum groups or channels registrations that the system can 
support.

Context

MIB
SUPERMICRO-SNOOP-MIB
OID
.1.3.6.1.4.1.10876.101.1.105.5.2.1.7
Type
column
Access
readwrite
Status
current
Parent
fsSnoopEnhPortEntry
Table
fsSnoopEnhPortTable
Siblings
11

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsSnoopEnhPortIndex
The interface index of the port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.105.5.2.1.1
fsSnoopEnhPortMaxBandwidthLimit
Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopEnhPortMaxLimitType must be set before configuring this object. If the fsSnoopEnhPortMaxLimitType is 'ch…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.10
fsSnoopEnhPortDropReports
This object decides whether to process or drop the IGMP reports coming on this port.
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.2.1.11
fsSnoopEnhPortRowStatus
The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.105.5.2.1.12
fsSnoopEnhPortInnerVlanId
The Inner VLAN Identifier.
columnInnerVlanIndex.1.3.6.1.4.1.10876.101.1.105.5.2.1.2
fsSnoopEnhPortInetAddressType
Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.10876.101.1.105.5.2.1.3
fsSnoopEnhPortLeaveMode
Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave messa…
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.2.1.4
fsSnoopEnhPortRateLimit
Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value supported by an unsi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.5
fsSnoopEnhPortMaxLimitType
Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas setting as …
columnEnumeration.1.3.6.1.4.1.10876.101.1.105.5.2.1.6
fsSnoopEnhPortProfileId
The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGMP packets received…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.8
fsSnoopEnhPortMemberCnt
Provides the total number of groups or channels active on the interface at the given time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.105.5.2.1.9