fsMIY1731MepThVerifiedFrameSize
SUPERMICRO-ECFM-Y1731-MI-MIB ·
.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.131
Object
column
Unsigned32
Indicates the Frame Size with which verified Throughput is achieved
Context
- MIB
- SUPERMICRO-ECFM-Y1731-MI-MIB
- OID
.1.3.6.1.4.1.10876.101.2.7.1.2.4.1.131- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIY1731MepEntry
- Table
- fsMIY1731MepTable
- Siblings
- 135
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-9000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIY1731MepIdentifier Integer that is unique among all the MEPs in the same ME.
Other definition is: a small integer, unique over a given
Maintenance Entity, identifying a specific Maintenance
Entity G… | column | IEEE8021-CFM-MIBDot1agCfmMepId | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.1 |
| fsMIY1731MepTransmitLbmStatus An Enumerated value set to 'start' to initiate LBM transmission
and 'stop' to stop LBM transmission.
'ready' and 'notReady' indicates whether LBM can be initiated or not.
… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.10 |
| fsMIY1731MepLckCondition Indicates if MEP is in LCK condition.
LCK condition occurs when it receives a LCK frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.100 |
| fsMIY1731MepLckInterval Interval between two successive LCK transmissions to be
used by the MEP. | column | FsY1731AisLckInterval | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.101 |
| fsMIY1731MepLckPeriod Time period (in seconds) for which LCK messages are to be
transmitted. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.102 |
| fsMIY1731MepLckPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LCK frame. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.103 |
| fsMIY1731MepLckDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LCK frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.104 |
| fsMIY1731MepLckDelay When a MEP is set as locked (for out-of-service operations), data traffic through
that MEP will be blocked after this delay. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.105 |
| fsMIY1731MepDefectConditions A vector of Boolean indicates the defect conditions. | column | FsY1731MepDefects | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.106 |
| fsMIY1731MepUnicastCcmMacAddress Unicast MacAddress used for performance monitoring through Continuity
Check Messages.
Continuity Check Messages are to be transmitted as multicast frames
incase t… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.107 |
| fsMIY1731MepRowStatus Indicates the status of MEP row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be acti… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.108 |
| fsMIY1731MepRxFCf The value of fsMIY1731MepRxFCf field is the value of in-profile data frames
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.109 |
| fsMIY1731MepTransmitLbmResultOK Indicates the result of LBM transaction,
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.11 |
| fsMIY1731Mep1DmTransInterval Time interval (in 0.01 seconds) between two successive One-way DM Transactions
and is used to carry out Delay Variation Measurement for
1DM transactions.
The value '0' indicates O… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.110 |
| fsMIY1731MepTransmitThDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Throughput Measurement. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.111 |
| fsMIY1731MepTransmitThDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.112 |
| fsMIY1731MepTransmitThDestIsMepId True indicates that MEPID of the target MEP is used for
Throughput Measurement.
False indicates that unicast destination MAC address of the
target MEP is used for Throughput Mea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.113 |
| fsMIY1731MepTransmitThMessages The number of Throughput messages (LBM / TST) to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.114 |
| fsMIY1731MepTransmitThPps The number of Throughput messages being transmitted in a second.
It is used to calculate the time interval between two successive
message transmission. It's default value is 100 … | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.115 |
| fsMIY1731MepTransmitThDeadline Specify a timeout, in seconds, before Throughput Measurement operation exits.
Throughput Measurement operation exits, if configured number of messages are
sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.116 |
| fsMIY1731MepTransmitThType Type of Throughput measurement to be initiated:
- oneWay(1) Measurement (by TST) is calculated at initiation end with
the use of VSM PDUs.
- twoWay(2) Measure… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.117 |
| fsMIY1731MepTransmitThStatus An Enumerated value set to 'start' to initiate Throughput transaction
and 'stop' to stop Throughput transaction.
'ready' and 'notReady' indicates whether Throughput transaction c… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.118 |
| fsMIY1731MepTransmitThFrameSize Indicates the initial total packet size configured by the user
including the Test TLV of the (LBM / TST) message.
Maximum frame size supported by ECFM is 9K,
foll… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.119 |
| fsMIY1731MepTransmitLbmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLbmDestType is 'Unicast' | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.12 |
| fsMIY1731MepTransmitThBurstMessages The number of Throughput messages (LBM / TST) to be transmitted in a
burst. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.120 |
| fsMIY1731MepTransmitThBurstDeadline Specify the time period, in milliseconds, for which a burst exists (LB Burst
/ TST Burst ). | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.121 |
| fsMIY1731MepTransmitThBurstType Throughput Burst can be initiated as:
- burstMessages(1) Number of Throughput messages (LBM / TST) to be
transmitted in a burst.
- burstDeadline(… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.122 |
| fsMIY1731MepTransmitThTestPatternType Indicates the type of the pattern to be included in the test TLV of
Throughput frame(LBM/TST PDU) .
TestTlvPattern Types can be:
patternNullSignalWithoutCRC32(0) Pattern contains … | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.123 |
| fsMIY1731MepThVerifiedBps This indicates the verified throughput value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.124 |
| fsMIY1731MepThUnVerifiedBps This indicates the throughput value under verification. This is the
throughput value for which verification is still to be performed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.125 |
| fsMIY1731MepTransmitLbmMode LBMs can be initiated as:
- burst(1) Lbms are initiated without waiting for the reception of
LBR PDUs.
- requestResponse(2) After initiating t… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.126 |
| fsMIY1731MepLbmOut Number of LBM messages transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.127 |
| fsMIY1731MepTransmitLbmTimeout Time for all the replies (LBR) of LBMs to be received by
the MEP.No reply (LBR) would be entertained thereafter (timeout). | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.128 |
| fsMIY1731MepTstCapability The administrative status of Tst capability.
This enables or disables capability of MEP to initiate and process
Tst operation.
A value of 'enabled' (1) indicates to initiate as… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.129 |
| fsMIY1731MepTransmitLbmDestMepId The Maintenance association End Point Identifier of another
MEP in the same Maintenance Entity to which the LBM is
to be sent.
This address will be used if the value of the column… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.13 |
| fsMIY1731MepTransmitThResultOK Indicates the result of Th transaction,
- true The TH Message(s) will be
(or has been) sent.
- false The TH Message(s) will not
be sent due t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.130 |
| fsMIY1731MepAisOffload The administrative MEP AIS Offloading status.
When value 'enabled' (1) is set, the AIS Offloading is enabled for the
MEP. When value 'disabled' (2) is set, the AIS Offloading wi… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.132 |
| fsMIY1731MepLbmTTL This object specifies the time-to-live(TTL) value to be used in the
MPLS outer label header when loopback connectivity verification (ping)
or diagnostic tests has to be performe… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.133 |
| fsMIY1731MepLbmIcc This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC
based MPLS-TP network for which loopback connectivity verification
(ping) or diagnostic tests has to be ini… | column | OctetString | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.134 |
| fsMIY1731MepLbmNodeId This object specifies the Node Id of the specific MIP node in MPLS-TP
network for which loopback connectivity verification(ping) or diagnostic
tests has to be initiated.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.135 |
| fsMIY1731MepLbmIfNum This object specifies the Interface Number of the specific MIP node in
MPLS-TP network for which loopback connectivity verification(ping) or
diagnostic tests has to be initiated… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.136 |
| fsMIY1731MepTransmitLbmDestType Indicates the Lbm Destination Type i.e. Unicast, MepID, Multicast
or MipId(MIP Id applicable only for MPLS-TP network). | column | FsY1731DestType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.14 |
| fsMIY1731MepTransmitLbmMessages The number of Loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.15 |
| fsMIY1731MepTransmitLbmInterval Interval between two successive LBM transmissions to be used by the
MEP.
fsMIY1731MepTransmitLbmIntervalType are used as units for this object.
Ranges applicable f… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.16 |
| fsMIY1731MepTransmitLbmIntervalType Units of fsMIY1731MepTransmitLbmInterval to be used by the
MEP for LBM transmission. | column | FsY1731TimeIntervalType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.17 |
| fsMIY1731MepTransmitLbmDeadline Specify a timeout, in seconds, before loopback (ping) exits.
Loopback (ping) exits, if configured number of messages
fsMIY1731MepTransmitLbmMessages are sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.18 |
| fsMIY1731MepTransmitLbmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LBM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.19 |
| fsMIY1731MepOutOfService A Boolean indicating the administrative service that is being or to be
performed.
true indicates operation needs to be performed Out-of-service
and false indicates operation nee… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.2 |
| fsMIY1731MepTransmitLbmPriority This Mib object is used for configuring LBM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority valu… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.20 |
| fsMIY1731MepTransmitLbmVariableBytes Indicates a varying number of data bytes is to be transmitted in the
LBM.
'true' indicates that LBMs to be transmitted are with varying bytes
of data and 'false' indicates that… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.21 |
| fsMIY1731MepTransmitLbmTlvType Indicates the type of the TLV to be included in the LBM frame, if
required to be send. | column | FsY1731TransmitLbmTlvTypeOrNone | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.22 |
| fsMIY1731MepTransmitLbmDataPattern An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent, determined by the
fsMIY1731MepTransmitLbmTlvType.
Size of data v… | column | OctetString | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.23 |
| fsMIY1731MepTransmitLbmDataPatternSize Indicates the size (bytes) of the
pattern(fsMIY1731MepTransmitLbmDataPatterm)
to be included in the Data TLV, if the Data TLV is to be included in the
LBM.
fsMIY1731MepTransmitL… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.24 |
| fsMIY1731MepTransmitLbmTestPatternType Indicates the type of pattern to be included in the test TLV of the LBM,
if the Test TLV is selected to be sent. | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.25 |
| fsMIY1731MepTransmitLbmTestPatternSize Indicates the size of the pattern to be included in the Test TLV,
if the Test TLV is selected to be sent.
Maximum frame size supported by ECFM is 9K,
following is t… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.26 |
| fsMIY1731MepTransmitLbmSeqNumber The sequence number to be transmitted in the next LBM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.27 |
| fsMIY1731MepBitErroredLbrIn The number of bit-errored LBRs received.
LBR with different pattern as of Test TLV in the sent LBM is considered
as bit-errored LBR | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.28 |
| fsMIY1731MepTransmitLtmStatus A Enumerated value set to 'transmit' to initiate LTM transmission.
'ready' and 'notReady' indicates whether LTM can be initiated or not.
Note: User can not set to … | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.29 |
| fsMIY1731MepRdiCapability The administrative status of RDI Transmission capability.
This enables or disables the transmission of RDI bit in the CCM PDU by
the MEP.
If fsMIY1731MepRdiPeriod is provided the… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.3 |
| fsMIY1731MepTransmitLtmResultOK Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.30 |
| fsMIY1731MepTransmitLtmFlags The flags field for LTMs transmitted by the MEP. Indicates that only MAC
address learned in bridge's forwarding tables is to be used to forward
the LTM to the next hop. | column | Bits | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.31 |
| fsMIY1731MepTransmitLtmTargetMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitLtmTargetIsMepId is 'fa… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.32 |
| fsMIY1731MepTransmitLtmTargetMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.33 |
| fsMIY1731MepTransmitLtmTargetIsMepId True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.34 |
| fsMIY1731MepTransmitLtmTtl The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each entity that handles the LTM.
… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.35 |
| fsMIY1731MepTransmitLtmDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted LTM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.36 |
| fsMIY1731MepTransmitLtmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LTM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.37 |
| fsMIY1731MepTransmitLtmSeqNumber The sequence number to be transmitted in next LBM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.38 |
| fsMIY1731MepTransmitLtmTimeout Time for all the replies (LTR) of a LTM to be received by
the MEP.No reply (LTR) would be entertained thereafter (timeout). | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.39 |
| fsMIY1731MepRdiPeriod Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability)
is enabled. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.4 |
| fsMIY1731MepMulticastTstRecvCapability The administrative status of multicast TST frame reception. This
enables or disables the capability of MEP to process the multicast TST.
A value of 'enabled' (1) indicates to acc… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.40 |
| fsMIY1731MepTransmitTstPatternType Indicates the type of the pattern to be included in the test TLV of TST
frame. | column | FsY1731TestTlvPatternType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.41 |
| fsMIY1731MepTransmitTstVariableBytes Indicates a varying number of data bytes to send in the TST.
True indicates that TSTs are to be send with varying bytes of data and
False indicates that TST(s) are send with same … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.42 |
| fsMIY1731MepTransmitTstPatternSize Indicates the size of the pattern to be included in the Test TLV of
the TST message.
Maximum frame size supported by ECFM is 9K,
following is the calculation for t… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.43 |
| fsMIY1731MepTransmitTstDestType Indicates the TST Destination Types (unicast,MEPID,Multicast) | column | FsY1731DestType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.44 |
| fsMIY1731MepTransmitTstDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIY1731MepTransmitTstDestType is 'Unica… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.45 |
| fsMIY1731MepTransmitTstDestMepId The Maintenance Entity Group End Point Identifier of another
MEP in the same Maintenance Association to which the TST is
to be sent.
This address will be used if the value of the … | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.46 |
| fsMIY1731MepTransmitTstSeqNumber Sequence number to be sent in the TST message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.47 |
| fsMIY1731MepTransmitTstPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted TST frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.48 |
| fsMIY1731MepTransmitTstDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted TST frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.49 |
| fsMIY1731MepCcmDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted CCM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.5 |
| fsMIY1731MepTransmitTstMessages The number of Test messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.50 |
| fsMIY1731MepTransmitTstStatus An Enumerated value set to 'start' to initiate TST transmission
and 'stop' to stop TST transmission.
'ready' and 'notReady' indicates whether TST can be initiated or not.
… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.51 |
| fsMIY1731MepTransmitTstResultOK Indicates the result of the operation:
- true The Test Message(s) will be
(or has been) sent.
- false The Test Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.52 |
| fsMIY1731MepTransmitTstInterval Interval between two successive TST transmissions to be used by the
MEP.
fsMIY1731MepTransmitTstIntervalType is used as units for this object.
Ranges applicable fo… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.53 |
| fsMIY1731MepTransmitTstIntervalType Units of fsMIY1731MepTransmitTstInterval to be used by the
MEP for TSTs transmission. | column | FsY1731TimeIntervalType | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.54 |
| fsMIY1731MepTransmitTstDeadline Specify a timeout(in seconds), before test exits. Test exits, if
configured number of messages are sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.55 |
| fsMIY1731MepBitErroredTstIn The number of bit-errored TST messages received.
Reception of invalid TST message is considered as bit-errored TST
messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.56 |
| fsMIY1731MepValidTstIn Number of valid TST messages received. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.57 |
| fsMIY1731MepTstOut Number of TST messages transmitted. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.58 |
| fsMIY1731MepTransmitLmmStatus An Enumerated value set to 'start' to initiate LM transmission
and 'stop' to stop LM transmission.
'ready' and 'notReady' indicates whether LM can be initiated or not.
… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.59 |
| fsMIY1731MepCcmPriority This Mib object is used for configuring CCM Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority valu… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.6 |
| fsMIY1731MepTransmitLmmResultOK Indicates the result of the operation:
- true The Loss measurement Message (LMM) will be (or has been) sent.
- false The Loss measurement Messag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.60 |
| fsMIY1731MepTransmitLmmInterval Interval between two successive LMM transmissions to be used by the MEP. | column | FsY1731LmmInterval | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.61 |
| fsMIY1731MepTransmitLmmDeadline Specify a timeout, in seconds, before loss measurement exits.
Loss Measurement exits, if configured number of messages are sent
before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.62 |
| fsMIY1731MepTransmitLmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.63 |
| fsMIY1731MepTransmitLmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.64 |
| fsMIY1731MepTransmitLmmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for LMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.65 |
| fsMIY1731MepTransmitLmmDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.66 |
| fsMIY1731MepTransmitLmmDestIsMepId True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.67 |
| fsMIY1731MepTransmitLmmMessages The number of LMM messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.68 |
| fsMIY1731MepTxFCf The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.69 |
| fsMIY1731MepMulticastLbmRecvCapability The administrative status of Multicast LBM frame reception. This enables
or disables the capability of MEP to process the multicast LBM.
A value of 'enabled' (1) i… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.7 |
| fsMIY1731MepRxFCb The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.70 |
| fsMIY1731MepTxFCb The value of fsMIY1731MepTxFCf field in the last CCM or LMR frame
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.71 |
| fsMIY1731MepNearEndFrameLossThreshold Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.72 |
| fsMIY1731MepFarEndFrameLossThreshold Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.73 |
| fsMIY1731MepTransmitDmStatus An Enumerated value set to 'start' to initiate 1DM or DMM transmission
and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicates whether 1DM or DMM can be init… | column | FsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.74 |
| fsMIY1731MepTransmitDmResultOK Indicates the result of the operation:
- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.75 |
| fsMIY1731MepTransmitDmType Type of delay measurement to be initiated:
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.76 |
| fsMIY1731MepTransmitDmInterval Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.77 |
| fsMIY1731MepTransmitDmMessages The number of DM (1DM or DMM) messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.78 |
| fsMIY1731MepTransmitDmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.79 |
| fsMIY1731MepLoopbackCapability The administrative status of Loopback (ping) capability.
This enables or disables capability of MEP to initiate and process
Loopback (ping) operation.
A value of 'enabled' (1) … | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.8 |
| fsMIY1731MepTransmit1DmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.80 |
| fsMIY1731MepTransmitDmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.81 |
| fsMIY1731MepTransmit1DmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.82 |
| fsMIY1731MepTransmitDmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for 1DM or DMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.83 |
| fsMIY1731MepTransmitDmDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.84 |
| fsMIY1731MepTransmitDmDestIsMepId True indicates that MEPID of the target MEP is used for
Delay frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.85 |
| fsMIY1731MepTransmitDmDeadline Specify a timeout, in seconds, before Delay Measurement operation exits.
Delay Measurement operation exits, if configured number of messages are
sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.86 |
| fsMIY1731MepDmrOptionalFields Indicates whether to include optional fields in the DMR Frame or not.
True indicates optional fields are to be included and False indicates
optional fields are not included.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.87 |
| fsMIY1731Mep1DmRecvCapability The administrative status of 1DM Frame reception. This enables
or disables the capability of MEP to process the 1DM Frames.
A value of 'enabled' (1) indicates to accept and proc… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.88 |
| fsMIY1731MepFrameDelayThreshold Threshold (in microseconds) for the Frame delay.
Notification is sent to Management application if calculated frame delay
exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.89 |
| fsMIY1731MepLbmCurrentTransId Identifies the current LBM Transaction. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.9 |
| fsMIY1731MepAisCapability The administrative status of AIS capability.This enables or disables
transmission of AIS frames.
A value of 'enabled' (1) indicates AIS frames will be transmitt… | column | FsY1731EnabledStatus | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.90 |
| fsMIY1731MepAisCondition Indicates MEP is in AIS condition.
AIS condition occurs when it receives an AIS frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.91 |
| fsMIY1731MepAisInterval Interval between two successive AIS transmissions. | column | FsY1731AisLckInterval | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.92 |
| fsMIY1731MepAisPeriod Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability)
is enabled. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.93 |
| fsMIY1731MepAisPriority This Mib object is used for configuring AIS Priority for the Ethernet
and the MPLS-TP (LSP/PW) based MEPs.
For Ethernet:
The Priority is a 3-bit priority valu… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.94 |
| fsMIY1731MepAisDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted AIS frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.95 |
| fsMIY1731MepAisDestIsMulticast An Enumerated value set to indicate the type of AIS transmission,
unicast or multicast.
'true' indicates that AIS(s) are to be transmitted as multicast,
'false' indicates that AI… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.96 |
| fsMIY1731MepAisClientMacAddress A unicast destination MAC address of the Client MEP to which AIS frame
is to send.
This object is not supported on MEPs created over MPLS-TP networks, as
these net… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.97 |
| fsMIY1731MepLckDestIsMulticast An Enumerated value set to indicate the type of LCK transmission,
unicast or multicast.
'true' indicates that LCK signals are to be transmitted as multicast,
'false' indicates th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.98 |
| fsMIY1731MepLckClientMacAddress A unicast destination MAC address of the Client MEP to which AIS frame
is to send. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.7.1.2.4.1.99 |