sunPlatNumericSensorRateUnits

SUN-PLATFORM-MIB · .1.3.6.1.4.1.42.2.70.101.1.1.8.1.3
MIB view Table view

Object

column SunPlatRateUnits 
If sunPlatRateUnits is set to a value other than none(1), 
then the units specified by sunPlatBaseUnits are further 
qualified as rate units. For example, if sunPlatBaseUnits
is set to degC(3), and sunPlatRateUnits is set to perSecond(4), 
then the value represented has the units degC/Second. This is as
defined for CIM_NumericSensor.RateUnits

Context

MIB
SUN-PLATFORM-MIB
OID
.1.3.6.1.4.1.42.2.70.101.1.1.8.1.3
Type
column
Access
readonly
Status
current
Parent
sunPlatNumericSensorEntry
Table
sunPlatNumericSensorTable
Siblings
15

Syntax

SunPlatRateUnits
Source
SunPlatRateUnits
Base type
Enumeration

Values & Constraints

Type Values
1none
2perMicroSecond
3perMilliSecond
4perSecond
5perMinute
6perHour
7perDay
8perWeek
9perMonth
10perYear

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sunPlatNumericSensorBaseUnits
The base unit of the values returned by this Sensor, as per CIM_NumericSensor.BaseUnits. Physical values are represented in the units obtained by (sunPlatBaseUnits…
columnSunPlatBaseUnits.1.3.6.1.4.1.42.2.70.101.1.1.8.1.1
sunPlatNumericSensorLowerThresholdCritical
This attribute describes the lower threshold at which a Critical condition occurs as defined for CIM_NumericSensor.LowerThresholdCritical.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.10
sunPlatNumericSensorUpperThresholdCritical
This attribute describes the upper threshold at which a Critical condition occurs as defined for CIM_NumericSensor.UpperThresholdCritical.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.11
sunPlatNumericSensorLowerThresholdFatal
This attribute describes the lower threshold at which a Fatal condition occurs as defined for CIM_NumericSensor.LowerThresholdFatal.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.12
sunPlatNumericSensorUpperThresholdFatal
This attribute describes the upper threshold at which a Fatal condition occurs as defined for CIM_NumericSensor.UpperThresholdFatal.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.13
sunPlatNumericSensorHysteresis
This attribute describes the hysteresis around the thresholds as defined by CIM_NumericSensor.Hysteresis.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.14
sunPlatNumericSensorEnabledThresholds
This attribute describes the enabled thresholds of this sensor as defined for CIM_NumericSensor.EnabledThresholds.
columnSunPlatNumericSensorEnabledThresholds.1.3.6.1.4.1.42.2.70.101.1.1.8.1.15
sunPlatNumericSensorRestoreDefaultThresholds
Writing to this attribute resets the sensors thresholds to the default settings.
columnSunPlatNumericSensorThresholdResetAction.1.3.6.1.4.1.42.2.70.101.1.1.8.1.16
sunPlatNumericSensorExponent
The exponent to be applied to the units returned by this sensor as for CIM_NumericSensor.UnitModifier.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.2
sunPlatNumericSensorCurrent
The current state of the sensor as per CIM_NumericSensor.CurrentReading.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.4
sunPlatNumericSensorNormalMin
The lowest expected value from this sensor as defined for CIM_NumericSensor.NormalMin. If there is no minimum value then no value is returned for this attribute.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.5
sunPlatNumericSensorNormalMax
The highest expected value from this sensor as defined for CIM_NumericSensor.NormalMax. If there is no maximum value then no value is returned for this attribute.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.6
sunPlatNumericSensorAccuracy
The accuracy as defined for CIM_NumericSensor.Accuracy of this sensor expressed as a +/-% value in units of 100ths of a percent.
columnSunPlatPercentage.1.3.6.1.4.1.42.2.70.101.1.1.8.1.7
sunPlatNumericSensorLowerThresholdNonCritical
This attribute describes the lower threshold at which a NonCritical condition occurs as defined for CIM_NumericSensor.LowerThresholdNonCritical.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.8
sunPlatNumericSensorUpperThresholdNonCritical
This attribute describes the upper threshold at which a NonCritical condition occurs as defined for CIM_NumericSensor.UpperThresholdNonCritical.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.42.2.70.101.1.1.8.1.9