sunPlatNumericSensorEnabledThresholds
SUN-PLATFORM-MIB ·
.1.3.6.1.4.1.42.2.70.101.1.1.8.1.15
Object
column
r/w
SunPlatNumericSensorEnabledThresholds
This attribute describes the enabled thresholds of this sensor as defined for CIM_NumericSensor.EnabledThresholds.
Context
- MIB
- SUN-PLATFORM-MIB
- OID
.1.3.6.1.4.1.42.2.70.101.1.1.8.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sunPlatNumericSensorEntry
- Table
- sunPlatNumericSensorTable
- Siblings
- 15
Syntax
SunPlatNumericSensorEnabledThresholds
- Source
- SunPlatNumericSensorEnabledThresholds
- Base type
Bits
Values & Constraints
Type Values
0 | lowerThresholdNonCritical |
1 | upperThresholdNonCritical |
2 | lowerThresholdCritical |
3 | upperThresholdCritical |
4 | lowerThresholdFatal |
5 | upperThresholdFatal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sunPlatNumericSensorBaseUnits The base unit of the values returned by this Sensor, as per
CIM_NumericSensor.BaseUnits.
Physical values are represented in the units obtained by
(sunPlatBaseUnits… | column | SunPlatBaseUnits | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.1 |
| sunPlatNumericSensorLowerThresholdCritical This attribute describes the lower threshold at which a Critical
condition occurs as defined for
CIM_NumericSensor.LowerThresholdCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.10 |
| sunPlatNumericSensorUpperThresholdCritical This attribute describes the upper threshold at which a Critical
condition occurs as defined for
CIM_NumericSensor.UpperThresholdCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.11 |
| sunPlatNumericSensorLowerThresholdFatal This attribute describes the lower threshold at which a Fatal
condition occurs as defined for
CIM_NumericSensor.LowerThresholdFatal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.12 |
| sunPlatNumericSensorUpperThresholdFatal This attribute describes the upper threshold at which a Fatal
condition occurs as defined for
CIM_NumericSensor.UpperThresholdFatal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.13 |
| sunPlatNumericSensorHysteresis This attribute describes the hysteresis around the thresholds as
defined by CIM_NumericSensor.Hysteresis. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.14 |
| sunPlatNumericSensorRestoreDefaultThresholds Writing to this attribute resets the sensors thresholds to the
default settings. | column | SunPlatNumericSensorThresholdResetAction | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.16 |
| sunPlatNumericSensorExponent The exponent to be applied to the units returned by this sensor as for
CIM_NumericSensor.UnitModifier. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.2 |
| sunPlatNumericSensorRateUnits If sunPlatRateUnits is set to a value other than none(1),
then the units specified by sunPlatBaseUnits are further
qualified as rate units. For example, if sunPlatBaseUnits
is s… | column | SunPlatRateUnits | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.3 |
| sunPlatNumericSensorCurrent The current state of the sensor as per
CIM_NumericSensor.CurrentReading. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.4 |
| sunPlatNumericSensorNormalMin The lowest expected value from this sensor as defined for
CIM_NumericSensor.NormalMin. If there is no minimum
value then no value is returned for this attribute. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.5 |
| sunPlatNumericSensorNormalMax The highest expected value from this sensor as defined for
CIM_NumericSensor.NormalMax. If there is no maximum
value then no value is returned for this attribute. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.6 |
| sunPlatNumericSensorAccuracy The accuracy as defined for CIM_NumericSensor.Accuracy of this sensor
expressed as a +/-% value in units of 100ths of a percent. | column | SunPlatPercentage | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.7 |
| sunPlatNumericSensorLowerThresholdNonCritical This attribute describes the lower threshold at which a NonCritical
condition occurs as defined for
CIM_NumericSensor.LowerThresholdNonCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.8 |
| sunPlatNumericSensorUpperThresholdNonCritical This attribute describes the upper threshold at which a NonCritical
condition occurs as defined for
CIM_NumericSensor.UpperThresholdNonCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.9 |