sunPlatNumericSensorBaseUnits
SUN-PLATFORM-MIB ·
.1.3.6.1.4.1.42.2.70.101.1.1.8.1.1
Object
column
SunPlatBaseUnits
The base unit of the values returned by this Sensor, as per
CIM_NumericSensor.BaseUnits.
Physical values are represented in the units obtained by
(sunPlatBaseUnits * 10 raised to the power of sunPlatExponent). For
example, if sunPlatBaseUnits is volts(6) and sunPlatExponent is -6,
then the units of the values returned are microVolts.
Context
- MIB
- SUN-PLATFORM-MIB
- OID
.1.3.6.1.4.1.42.2.70.101.1.1.8.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sunPlatNumericSensorEntry
- Table
- sunPlatNumericSensorTable
- Siblings
- 15
Syntax
SunPlatBaseUnits
- Source
- SunPlatBaseUnits
- Base type
Enumeration
Values & Constraints
Type Values
1 | other |
2 | unknown |
3 | degC |
4 | degF |
5 | degK |
6 | volts |
7 | amps |
8 | watts |
9 | joules |
10 | coulombs |
11 | va |
12 | nits |
13 | lumens |
14 | lux |
15 | candelas |
16 | kPa |
17 | psi |
18 | newtons |
19 | cfm |
20 | rpm |
21 | hertz |
22 | seconds |
23 | minutes |
24 | hours |
25 | days |
26 | weeks |
27 | mils |
28 | inches |
29 | feet |
30 | cubicInches |
31 | cubicFeet |
32 | meters |
33 | cubicCentimeters |
34 | cubicMeters |
35 | liters |
36 | fluidOunces |
37 | radians |
38 | steradians |
39 | revolutions |
40 | cycles |
41 | gravities |
42 | ounces |
43 | pounds |
44 | footPounds |
45 | ounceInches |
46 | gauss |
47 | gilberts |
48 | henries |
49 | farads |
50 | ohms |
51 | siemens |
52 | moles |
53 | becquerels |
54 | ppm |
55 | decibels |
56 | dBA |
57 | dbC |
58 | grays |
59 | sieverts |
60 | colorTemperatureDegK |
61 | bits |
62 | bytes |
63 | words |
64 | doubleWords |
65 | quadWords |
66 | percentage |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sunPlatNumericSensorLowerThresholdCritical This attribute describes the lower threshold at which a Critical
condition occurs as defined for
CIM_NumericSensor.LowerThresholdCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.10 |
| sunPlatNumericSensorUpperThresholdCritical This attribute describes the upper threshold at which a Critical
condition occurs as defined for
CIM_NumericSensor.UpperThresholdCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.11 |
| sunPlatNumericSensorLowerThresholdFatal This attribute describes the lower threshold at which a Fatal
condition occurs as defined for
CIM_NumericSensor.LowerThresholdFatal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.12 |
| sunPlatNumericSensorUpperThresholdFatal This attribute describes the upper threshold at which a Fatal
condition occurs as defined for
CIM_NumericSensor.UpperThresholdFatal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.13 |
| sunPlatNumericSensorHysteresis This attribute describes the hysteresis around the thresholds as
defined by CIM_NumericSensor.Hysteresis. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.14 |
| sunPlatNumericSensorEnabledThresholds This attribute describes the enabled thresholds of this sensor as
defined for CIM_NumericSensor.EnabledThresholds. | column | SunPlatNumericSensorEnabledThresholds | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.15 |
| sunPlatNumericSensorRestoreDefaultThresholds Writing to this attribute resets the sensors thresholds to the
default settings. | column | SunPlatNumericSensorThresholdResetAction | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.16 |
| sunPlatNumericSensorExponent The exponent to be applied to the units returned by this sensor as for
CIM_NumericSensor.UnitModifier. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.2 |
| sunPlatNumericSensorRateUnits If sunPlatRateUnits is set to a value other than none(1),
then the units specified by sunPlatBaseUnits are further
qualified as rate units. For example, if sunPlatBaseUnits
is s… | column | SunPlatRateUnits | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.3 |
| sunPlatNumericSensorCurrent The current state of the sensor as per
CIM_NumericSensor.CurrentReading. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.4 |
| sunPlatNumericSensorNormalMin The lowest expected value from this sensor as defined for
CIM_NumericSensor.NormalMin. If there is no minimum
value then no value is returned for this attribute. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.5 |
| sunPlatNumericSensorNormalMax The highest expected value from this sensor as defined for
CIM_NumericSensor.NormalMax. If there is no maximum
value then no value is returned for this attribute. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.6 |
| sunPlatNumericSensorAccuracy The accuracy as defined for CIM_NumericSensor.Accuracy of this sensor
expressed as a +/-% value in units of 100ths of a percent. | column | SunPlatPercentage | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.7 |
| sunPlatNumericSensorLowerThresholdNonCritical This attribute describes the lower threshold at which a NonCritical
condition occurs as defined for
CIM_NumericSensor.LowerThresholdNonCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.8 |
| sunPlatNumericSensorUpperThresholdNonCritical This attribute describes the upper threshold at which a NonCritical
condition occurs as defined for
CIM_NumericSensor.UpperThresholdNonCritical. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42.2.70.101.1.1.8.1.9 |