sub10UnitLocalStatus

SUB10SYSTEMS-MIB · .1.3.6.1.4.1.39003.3.1.1
MIB view Table view

Object

node

No description available.

Context

MIB
SUB10SYSTEMS-MIB
OID
.1.3.6.1.4.1.39003.3.1.1
Type
node
Parent
sub10UnitStatus
Siblings
1
Children
18

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sub10UnitRemoteStatusnode-.1.3.6.1.4.1.39003.3.1.2
Child Objects
ObjectTypeSyntaxOID
sub10UnitLclTime
The local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15
scalarSub10DateTime.1.3.6.1.4.1.39003.3.1.1.1
sub10UnitLclFirmwareLoadedBank
Currently loaded bank. The firmware version running in this bank is defined by sub10UnitLclFirmwareVersion.
scalarSub10FirmwareBank.1.3.6.1.4.1.39003.3.1.1.10
sub10UnitLclFirmwareVersion
The firmware version currently running on the local unit. This is by definition the firmware loaded into the bank number defined in sub10UnitLclFirmwareLoadedBank.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.11
sub10UnitLclIpAddress
The IP address of the local ethernet interface.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.12
sub10UnitLclMWUTemperature
The modem temperature on the local unit in degrees celsius.
scalarInteger32.1.3.6.1.4.1.39003.3.1.1.13
sub10UnitLclNTPSyncStatus
The indication that the systems clock is synchronised with the NTP server.
scalarSub10NTPSyncStatus.1.3.6.1.4.1.39003.3.1.1.14
sub10UnitLclAlarmStateTable
The table listing the each active alarm the local unit. An active alarm is where the alarm state is 'raised' at the specific severity level. The entries in the table co…
table-.1.3.6.1.4.1.39003.3.1.1.15
sub10UnitLclRadioDataRate
The maximum data rate of the Airside interface. This has the same value as sub10RadioLclDataRate.
scalarSub10RadioDataRate.1.3.6.1.4.1.39003.3.1.1.16
sub10UnitLclMWUType
The local MWU type
scalarSub10MWUType.1.3.6.1.4.1.39003.3.1.1.17
sub10UnitLclFPGAVersion
The FPGA Version.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.18
sub10UnitLclUnitType
Uniquely identifies the local unit product type
scalarSub10UnitType.1.3.6.1.4.1.39003.3.1.1.2
sub10UnitLclDescription
The description of the local unit. This is synonymous with MIB-II sysDescr.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.39003.3.1.1.3
sub10UnitLclHWSerialNumber
The hardware serial number of the Local Unit. This also identifies whether the unit is a V-band or E-band product. See sub10UnitLclMWUType.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.4
sub10UnitLclTerminalName
The administratively assigned name for the unit. This is synonymous with MIB-II sysName and can be administratively set via either sysName or sub10UnitMgmtTerminalName.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.5
sub10UnitLclTerminalType
Uniquely identifies the local terminal type A or B.
scalarSub10TerminalType.1.3.6.1.4.1.39003.3.1.1.6
sub10UnitLclLinkName
The administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or lo…
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.7
sub10UnitLclLinkId
The administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units.
scalarOctetString.1.3.6.1.4.1.39003.3.1.1.8
sub10UnitLclSiteName
The administratively assigned physical location of the local unit.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.39003.3.1.1.9