sub10UnitLclAlarmStateTable

SUB10SYSTEMS-MIB · .1.3.6.1.4.1.39003.3.1.1.15

MIB view Table view

Object

table

The table listing the each active alarm the local unit.
An active alarm is where the alarm state is 'raised' at the
specific severity level.
          
The entries in the table correspond to the configured entries in
sub10UnitMgmtAlarmTable.
          
This table has a single entry per alarm where the index to the table is
the same index as the associated Alarm configuration
table sub10UnitMgmtAlarmTable.

Context

MIB: SUB10SYSTEMS-MIB
OID: .1.3.6.1.4.1.39003.3.1.1.15
Type: table
Status: current
Parent: sub10UnitLocalStatus
Siblings: 17
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sub10UnitLclTime The local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15	scalar	Sub10DateTime	`.1.3.6.1.4.1.39003.3.1.1.1`
sub10UnitLclFirmwareLoadedBank Currently loaded bank. The firmware version running in this bank is defined by sub10UnitLclFirmwareVersion.	scalar	Sub10FirmwareBank	`.1.3.6.1.4.1.39003.3.1.1.10`
sub10UnitLclFirmwareVersion The firmware version currently running on the local unit. This is by definition the firmware loaded into the bank number defined in sub10UnitLclFirmwareLoadedBank.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.11`
sub10UnitLclIpAddress The IP address of the local ethernet interface.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.12`
sub10UnitLclMWUTemperature The modem temperature on the local unit in degrees celsius.	scalar	Integer32	`.1.3.6.1.4.1.39003.3.1.1.13`
sub10UnitLclNTPSyncStatus The indication that the systems clock is synchronised with the NTP server.	scalar	Sub10NTPSyncStatus	`.1.3.6.1.4.1.39003.3.1.1.14`
sub10UnitLclRadioDataRate The maximum data rate of the Airside interface. This has the same value as sub10RadioLclDataRate.	scalar	Sub10RadioDataRate	`.1.3.6.1.4.1.39003.3.1.1.16`
sub10UnitLclMWUType The local MWU type	scalar	Sub10MWUType	`.1.3.6.1.4.1.39003.3.1.1.17`
sub10UnitLclFPGAVersion The FPGA Version.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.18`
sub10UnitLclUnitType Uniquely identifies the local unit product type	scalar	Sub10UnitType	`.1.3.6.1.4.1.39003.3.1.1.2`
sub10UnitLclDescription The description of the local unit. This is synonymous with MIB-II sysDescr.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.39003.3.1.1.3`
sub10UnitLclHWSerialNumber The hardware serial number of the Local Unit. This also identifies whether the unit is a V-band or E-band product. See sub10UnitLclMWUType.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.4`
sub10UnitLclTerminalName The administratively assigned name for the unit. This is synonymous with MIB-II sysName and can be administratively set via either sysName or sub10UnitMgmtTerminalName.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.5`
sub10UnitLclTerminalType Uniquely identifies the local terminal type A or B.	scalar	Sub10TerminalType	`.1.3.6.1.4.1.39003.3.1.1.6`
sub10UnitLclLinkName The administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or lo…	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.7`
sub10UnitLclLinkId The administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.1.1.8`
sub10UnitLclSiteName The administratively assigned physical location of the local unit.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.39003.3.1.1.9`

Child Objects