slEntPhysicalProtectState
SL-ENTITY-MIB ·
.1.3.6.1.4.1.4515.1.3.6.1.1.1.9
Object
column
Enumeration
The protection state of physical entity. This object is not applicable should the protection be done on a per-port basis. In the case of Switch protection the following logic should be used: 1. If there is only one card is present - noProtection(3) 2. If the standby card is not ready - the active card should have the value noProtection(3), and the standby card should have the value protecting(2) 3. If the protecting card is ready - the active card should have the value working(1) and the standby card should have the value protecting(2)
Context
- MIB
- SL-ENTITY-MIB
- OID
.1.3.6.1.4.1.4515.1.3.6.1.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- slEntPhysicalEntry
- Table
- slEntPhysicalTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | working |
2 | protecting |
3 | noProtection |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slEntPhysicalIndex The Slot number of the entity. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4515.1.3.6.1.1.1.1 |
| slEntPhysicalProtectMode The protection mode of physical entity.
The default value is automatic(3)
This object is not applicable should the protection be done
on a per-port basis. | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.14 |
| slEntPhysicalStatus The physical entity status bitmap:
1 - Card is removed from the slot
2 - Communication Fault
4 - Major alarm inherited from the ports
8 - Card or port HW fail… | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.15 |
| slEntPhysicalFailureDescription Text that describes the last entity failure. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.16 |
| slEntPhysicalAdminStatus The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdmi… | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.17 |
| slEntPhysicalOperStatus The current operational state of the interface.
If slEntPhysicalAdminStatus is down(2) then
slEntPhysicalOperStatus should be down(2).
If slEntPhysicalAdminStatus is changed to… | column | Enumeration | .1.3.6.1.4.1.4515.1.3.6.1.1.1.18 |
| slEntPhysicalSysUptime The number of timer ticks since the last reboot of the module. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4515.1.3.6.1.1.1.19 |
| slEntPhysicalDescr A textual description of physical entity. This object
should contain a string which identifies the manufacturer's
name for the physical entity, and should be set to a
distinct va… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.2 |
| slEntPhysicalType The type of the physical module. | column | PhysicalType | .1.3.6.1.4.1.4515.1.3.6.1.1.1.20 |
| slEntPhysicalCleiCode The Clei Code resides in the SEEP of each card. | column | CleiCode | .1.3.6.1.4.1.4515.1.3.6.1.1.1.21 |
| slEntPhysicalPartNumber The card part number. This is a string of upto 12 characters. | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.22 |
| slEntPhysicalOemSerialNum The oem-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
… | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.23 |
| slEntPhysicalProductionDate The entity production date in the format YYYY-WW. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.24 |
| slEntPhysicalSysTemp Internally measured module temperature. The value 0 means -128 Celsuis.
An increment on one is equivalent to 1/256 degree,
yielding a total range of -128 to +128 Celsius. | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.25 |
| slEntPhysicalSysAlias The module alias as given by the user. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.26 |
| slEntPhysicalSysSubType The subtype of the physical module.
The possibel values of this object are drived from the value of slEntPhysicalType. | column | Integer32 | .1.3.6.1.4.1.4515.1.3.6.1.1.1.27 |
| slEntPhysicalClass An indication of the general hardware type of the physical
entity.
An agent should set this object to the standard enumeration
value which most accurately indicates… | column | PhysicalClass | .1.3.6.1.4.1.4515.1.3.6.1.1.1.3 |
| slEntPhysicalHardwareRev The vendor-specific hardware revision string for the
physical entity. The preferred value is the hardware
revision identifier actually printed on the component itself
(if present… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.4 |
| slEntPhysicalFirmwareRev The vendor-specific firmware revision string for the
physical entity (normally the boot-revision).
Note that if revision information is stored internally in a
non-p… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.5 |
| slEntPhysicalSoftwareRev The vendor-specific software revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) forma… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.6 |
| slEntPhysicalSerialNum The vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
… | column | OctetString | .1.3.6.1.4.1.4515.1.3.6.1.1.1.7 |
| slEntPhysicalProtectionEntity The value of slEntPhysicalIndex for the physical entity which
'protects' this physical entity. A value of zero indicates
this physical entity has no protecting physical
entity.
T… | column | PhysicalIndex | .1.3.6.1.4.1.4515.1.3.6.1.1.1.8 |